Metallradsätze

Metallradsätze

Metallradsätze

Metallradsätze

Metallradsätze

Metallradsätze

Metallradsätze

• with DCC Decoder
• with Sound

Beleuchtung

Union Pacific, „Centipede” Öltender, u.a. für Lokomotiven der Reihe 4000 „Big Boy“

Metallradsätze

Metallradsätze, McHenry-Klauenkupplungen, fein detailliert mit zum Teil separat angebrachten Details, beschwert für bessere Laufeigenschaften

All-new model Era: 1997 to 2005 Series 249135 to 249254, built 12/97 Road numbers 249180, 249186, 249198, 249216, 249223 and 249251 As delivered paint No conspicuity striping 2 x Version 4 Hood: Corner reinforcement, long side handrail, hood stacking brackets with solid inner guides Fully-assembled Multiple road numbers Body with dual trough design and center divider, sixteen walkway side supports and simulated wood trough interior. Designed for the use of two hoods although, depending on the type of steel, the car can be run without hoods as well. Body has four wireform side grab irons and four wireform end grab irons Each hood is constructed with up to 27 individual parts including 12 photo etched handrail stanchions, six wireform handrails, four wireform grab irons, two hood stacking brackets, two hood top braces, and lifting bail Handbrake housing with finely detailed wheel and chain See-through photo-etched metal walkway Simulated wood interior floor using a hand applied wash Four (4) positionable load dividers Four (4) large unwrapped coil steel loads with metal weight inside each Factory-applied end handrails, hood guides, stanchions, load divider tracks, metal grab irons, coupler cut levers, and trainline hoses with silver gladhands Complete underbody brake system with over 20 separately applied parts including air reservoir, control valve, and retainer valve plus wireform plumbing and trainline pipe with brackets Durable body-mounted die-cast metal semi-scale SE Type lower shelf knuckle couplers Highly-detailed Barber S-2 100-ton trucks with finely rendered raised foundry data, rotating bearing caps, side bearing detail, and separate brake beam detail Printed reporting mark and road number on all four trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread Operates on Code 70, 83 and 100 rail Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-172 Weathered Concrete Weighted to Industry standards for reliable operation Packaging safely stores model Recommended radius 18”

• Ready for use with DCC (DCC interface)

New roadname Era: mid 1970s to late 1980s Series 2200 to 2249, 2198-2199; ex-PRR/PC 2200 to 2251, built 2-5/63 Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Operating LED-illuminated front and rear red marker lights with lenses** Cab and rear number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers with retrofitted switchman grab handles As-delivered pilot faces with uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle Dummy multiple unit (MU) receptacle mounted to end handrail stanchions “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab No sunshades or sunshade tracks Lost-wax brass cast Leslie SU-3L-R horn mounted on right side cab eave Large Sinclair Excalibur “ice skate” antenna (communications) mounted on the cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Late See-through dynamic brake intake grills with horizontal wires through vertical vanes 6-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell Prime air filter (can style) 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

• with DCC Decoder
• with Sound

New roadname Era: 1963 to early 1970s Series 1246 to 1284; built 1-6:1963 Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Operating LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** Cab and rear number boards Front and rear multiple unit (MU) hose catch boxes and footboards 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab side vent on left side Sliding cab side windows Small mirrors mounted fore of cab side windows on both sides of cab No sunshades or sunshade tracks Lost-wax brass cast Leslie Supertyfon S-2M over the cab engineers side and single chime S-25 over the cab conductors side Bendix-King 'can' style antenna mounted on cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Early See-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with square and sloped bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

• Ready for use with DCC (DCC interface)

Small data and label variations Operating LED front and rear tricolor flush-mounted with raised gasket class lights** Black cab armrest Raised slug electrical conduit cover on rear walkway deck with slug electrical bus connections on end Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Printed and LED lighted number boards* Extended walkway duct (SP toolbox) on left side Front and rear full width multiple unit (MU) hose catch tray 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Straight uncoupling levers with loop handles front and rear and four inner and two outer mounting brackets Notched pilot faces without lifting holes or slots Deck mounted multiple unit (MU) receptacle "Tall" stepwells with see-through steps Front and rear early small deck extension Handrail set with inward facing end rail mounting brackets and chain Standard front and rear drop steps Scale sectioned treadplate detail on walkways Rectangle walkway lights mounted between sandbox clean out doors (non-operating) 81” low short hood with ratchet handbrake with angled chain guard, “inverted” louvers on the left side, and round vent on top Bolted battery box doors with wide louvers SP “split” cab sub-base doors with stiffener rib and early hinges Standard EMD headlight in short hood Dash 2 cab with 11-bolt (top and bottom) window panels, modified (“used-to-be”) SP L-window, large armrests, and “inverted” hot water heater louvers on right front Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Vent on rear cab door, cab front above engineer’s window, and large square vent on cab roof on fireman’s side Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades and long sunshade tracks Lost wax brass cast Nathan P-3 (P24R1 configuration) horn on number board housing “Whip” antenna mounted to center of cab roof Accurate hood door and long hood detail Early electrical cabinet "zig-zag" seam, further from rear of cab Early “stand-off” ECAFB Intermediate inertial air intake grills with top drip rail Dual tall exhaust stacks Accurately profiled extended-range dynamic brakes without batten strip See-through dynamic brake intakes with resistor grid detail Square PAF (Paper Air Filter) housing “Chicken-wire” radiator intake grilles See-through standard 48” radiator fan housings with fan blades visible inside Curved radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets, and D-77 traction motor and air duct details, triple clasp brake shoes, and third brake cylinder Dimensionally accurate truck centers Speed recorder mounted to first axle left front Rearward facing handbrake chain mount for HTC trucks Tall jacking pads with holes (early) Aft engineer’s side sidesill notch Tab-mount EFCO Tripod-mount bell with air line on cab roof Salem air filter (accordion style) 4,000-gallon fuel tank with fuel fillers and dual vertical gauges and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

Pre-order deadline: 6/24/2024

• Ready for use with DCC (DCC interface)

New paint scheme Era: early 2000s to 2008 UP series mixed; ex-SP 5356 to 5373; nee-DRGW 5356 to 5373; built 7/75 to 8/75 Road number 8625; ex-SP/DRGW 5368 UP “Patch” former Southern Pacific/DRGW speed lettered repaint Fully-assembled LED-illuminated ground lights on both sides of locomotive* LED-illuminated-illuminated front deck mounted ditch lights** LED-illuminated-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* Plated over Mars SBW-2-301 signal light in low short hood Blanked class lights with bolted plates front and rear Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights Front EMD-style low pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front early small deck extension Early front drop step (pivoting) Front "tall" stepwells with see-through steps and rear “ladder” steps 81” low short hood with ratchet handbrake and straight chain guard Bolted battery box doors with narrow louvers Early cab sub-base doors with early hinges Standard EMD headlight in numberboard housing Dash-2 cab with bolted side window panels and D&RGW blue flag bracket Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Original cab front door Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Rectangular vent on right cab side, towards rear of cab Standard EMD sunshades and long sunshade tracks Lost-wax brass Nathan AirChime P24R1 (“P-3”) three-chime horn on clearance bracket, relocated to long hood roof Large Sinclair Excalibur “ice skate” antenna (communications) and small wedge antenna mounted on cab roof Early electrical cabinet "zig-zag" seam, further from rear of cab Stand-off ECAFB (early) Intermediate inertial air intake grills with top drip rail Extended-range dynamic brake Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with outward facing end rail mounting brackets, rear anticlimber and chain Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with low mounted angled lifting slots Deck-mounted MU receptacle Front early small deck extension rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail Standard turbo exhaust stack See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Retrofitted PTC wheel slip pickups on left side axles 1-3, and right side axles 4-6 Dimensionally accurate truck centers Speed recorder third axle, right side Forward facing handbrake chain mount for Flexicoil trucks Tall jacking pads with holes (early) Spare knuckle boxes mounted to truck sideframes and spare knuckle holders on rear pilot face Sill-mounted EFCO Frame-mounted bell Graham-White (Salem) brand 824-170 and 818-170 primary and secondary centrifugal air filters (accordion-style) Air tanks with fluid drain pipes on sides of fuel tank 4,000 gallon fuel tank with dual fuel fillers, vertical gauge, round gauge in tank and vertical breather pipe ACI label plates mounted on plates attached to handrail stanchions and painted over Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DC/DCC & sound ready locomotives also feature: Operable using a DC power pack DCC ready with 21-pin connector

Pre-order deadline: 6/24/2024

• Ready for use with DCC (DCC interface)

New paint scheme Era: early 2000s to 2008 UP series mixed; ex-SP 8230 to 8299; built 3/80 to 7/80 Road number 8782; ex-SP 8230 UP “Patch” former Southern Pacific speed lettered repaint Fully-assembled No truck ground lights (prototype not equipped) LED-illuminated-illuminated front deck mounted ditch lights** LED-illuminated-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* Plated over front and blanked rear red Pyle-National 17540 “UDE” Gyralites Blanked class lights with gaskets on front and bolted plates on rear Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges Dash-2 cab with welded side window panels, SP/SSW blue flag bracket, and modified “L” front window Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab front door with additional door lock at top of door Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Rectangular vent on left cab side, towards rear of cab Standard EMD sunshades and long sunshade tracks Vapor Corp. cab roof HVAC Lost-wax brass Nathan K3HA three-chime horn on clearance bracket, relocated to long hood roof “Whip” radio antenna mounted on ground plane over dust bin Late electrical cabinet "zig-zag" seam, closer to rear of cab Welded ECAFB (late) Late inertial air intake grilles with top and bottom drip rail "Post 1980" extended-range dynamic brake with exhaust silencer Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Front narrow “blunt” front anticlimber rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail “Post-1980” exhaust silencer See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Dimensionally accurate truck centers Speed recorder first axle, left side Forward facing handbrake chain mount for Flexicoil trucks Four-hole SP jacking pads Spare knuckle holders on rear pilot face Additional spare knuckle box only on front left truck sideframe Sill-mounted EFCO Frame-mounted bell Double Graham-White (Prime) brand 975-075 (can style) Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DC/DCC & sound ready locomotives also feature: Operable using a DC power pack DCC ready with 21-pin connector

• with DCC Decoder
• with Sound

Road Number Specific ScaleTrains New paint scheme Era: 1966 to early 1970s Santa Fe Series 1830-1889; built 10-12:66, Phase Ib1 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* LED-lit tricolor (red, green, and white) flush-mounted class lights with raised gasket** Front and rear full-width MU catch trays with footboards Front and rear early small deck extension Pivoting front and rear drop steps “Short” stepwells with see-through steps “Early” (“X”) pattern walkway treadplate Latched battery box doors with narrow louvers Latched cab sub-base doors with early hinges 81” low short hood with plated-over handbrake location Standard EMD high headlight in numberboard housing Early straight grabs and “flipped” nut-bolt-washer (NBW) mounting on nose front and top “35-Line” cab with standard front windshields Small mirrors mounted fore of cab side windows on both sides of cab No sunshades No Arm rests No cab vents Lost-wax brass Leslie RS-3L-R three-chime horn; mounted center rear of number board housing Can type antenna mounted on dust bin Standard electrical cabinet seam and bolted alternator door No ECAFB Early (smooth) blower duct housing Standard-height dust bin Standard-height exhaust stack Early (short forward taper) extended-range dynamic brakes “Chickenwire” radiator intake grilles with diamond-pattern mesh screens Standard-height fan housings Photoetched spiral-ring grilles with center disk Long walkway duct with three short stanchions Front and rear straight uncoupling levers with four brackets Handrail set with pilot face mounted outer end rail stanchions 4-hose MU hose clusters with silver gladhands Early (angled) deck-mounted MU receptacle Short “nub-bottom” pilot face Pilot face bracing detail behind stepwells Pilot face grab iron with inner mounting points Tall jacking pads with holes Sill-mount EFCO button Frame-mounted bell Salem air filter (accordion style) 4,000-gallon fuel tank with single fuel filler, single vertical fuel gauge, and round dial fuel gauge per side Detailed Flexicoil-C (low-mount brake cylinder) trucks with Hyatt bearing caps and sanding lines and brackets Speed recorder second axle, left side Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged EMD 20 Cylinder 645E3 prime mover ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts

Pre-order deadline: 6/24/2024

• with DCC Decoder
• with Sound

New roadname First CPKC model in the hobby Era: 2024 to Present CPKC 4805; ex-KCS 4805 built October 2012 Fully-assembled LED-illuminated ground lights on both sides of locomotive* LED-illuminated front, rear and rectangle side walkway lights* LED-illuminated front deck-mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with die-cast metal semi-scale SBE bottom shelf knuckle couplers Inside loop uncoupling levers with up down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles See-through round-hole stepwell steps Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and narrow rear most stanchion on long side rails Narrow profile end handrails Sand box clean out door with knuckle buster latch Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome with transverse mounted Sinclair antenna and dual long STI-CO PTC Dual Track Antenna System with Radome covers Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille Dynamic brake cab door with low door handle and low mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 tall doors with latches on the #2 door and long auxiliary cab filter box door Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Three engine cab roof lift rings Lost wax brass cast Nathan AirChime K5LA horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille 22 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel short front angled grille and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High mounted horizontal rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with unused electric parking brake mounting brackets on right front and left rear side frames and separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets Curved handbrake chain bracket Toilet drain with interior handle AEI tag mounted on bracket below the right sidesill Dual Graham-White (Salem) accordion 824 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital Fuel Gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank mounted electronic bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

• with DCC Decoder
• with Sound

Museum Qualität, noch mehr Details und Funktionen Das Set besteht aus A-Unit, B-Unit und Tender Alle Achsen angetrieben, Stromaufnahme über alle Achsen, LED Beleuchtung, Inneneinrichtung ESU LokSound + DCC Decoder Era: Late Mid 1960s to Late 1960s Series 1 to 15, built 2/59 Road number 6 3-unit set: “A”, “B”, and Fuel Tender Premium leather-like presentation case with metal latches for safe storage Fully-assembled Multiple road numbers available Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Minimum radius: 18” without water and electrical bus connections and tender truck safety chain detail attached Recommended radius: 22” “A” Control Unit Without “Union Pacific” lettering on the nose Operating LED-lit tricolor (red, green, and white) class lights** Operating LED-lit cab interior light Operating LED-lit control panel Operating LED-lit ground light on engineer’s side Operating LED-lit rear walkway light Printed and LED lighted number boards With nose side grab irons Opening cab doors with separate door handles Detailed cab interior with separate control stand, floor, rear wall with water cooler, and seats Radiator mounted lost wax brass Leslie S-5T-R air horn mounted on clearance bracket Cab roof heater box with grille on right side only Square base whip antenna Large see-through photo-etched metal side grilles H – H dynamic brake housing with etched-metal grilles With air intake scoops Modified radiator with all-weather shutter Underbody frame rail with traction motor cable detail As delivered 2,500 Gallon diesel fuel tank Air tanks with separate plumbing Auxiliary reservoirs Rubber Multiple Unit (MU) and electrical bus connections between the “A” and “B” units Rubber water hoses between the “A” and “B” unit Durable metal semi-scale Type E knuckle couplers Factory-applied ladders, wire grab irons, coupler cut levers, windshield wipers, mirrors, trainline hose, lifting lugs, exhaust stack, bell, and sanding lines Highly detailed trucks with separately applied brake cylinders, air pipes and lost wax brass wheel slip indicators on left side frames Mixed SKF and Timken bearings on right side truck frames Chicago Pneumatic speed recorder on second axle right side Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pickup Directional LED headlight DCC & sound equipped locomotives feature: Operates on both DC and DCC layouts ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Prime mover sound Curve squeal sound Frog clank sound Large oval speaker ESU designed “PowerPack” with two super capacitors*** DC/DCC & sound ready locomotives feature: Operable using a DC power pack DCC-ready with 21-pin connector “B” Turbine Unit Operating LED-lit back-up light Sliding engine compartment side doors Detailed interior with turbine visible inside Spinning turbine fan blade visible inside exhaust Dual Farr Dynavane inertial type air intake housings Single H dynamic brake housing with etched-metal grilles Offset air intake scoops With rear MU connections Factory-applied ladders, wire grab irons, coupler cut levers, trainline hose, lifting lugs, and sanding lines Underbody frame rail Highly detailed trucks with separately applied brake cylinders, air pipes and lost wax brass wheel slip indicators on left side frames Mixed SKF and Timken bearings on right side truck frames Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pickup DCC & sound equipped locomotives feature: Operates on both DC and DCC layouts ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Turbine sound Curve squeal sound Frog clank sound Large oval speaker ESU designed “PowerPack” with two super capacitors*** 24C Fuel Tender 24,000-gallon capacity Welded seams Insulated Commonwealth 6-axle trucks Truck chains Factory-applied air tank, brake cylinder, and control valve Factory-applied multiple unit (MU) hoses Photo-etched metal tender deck walkway Operating LED-lit rear tender light