Loconet Universal Kabel 6adrig, z. Bsp. zum verbinden von UP5 und anderen Digitrax Komponenten. - RJ12 Stecker - RJ12 Stecker - voll belegt - Stecker: 6polig - Länge: 3 m

Kehrschleifenmodul mit englischer Anleitung. * 8 amp Auto-reversing control for a single reversing district. * Simple to wire. * Tunable trip current lets you use it on any layout from Z to G. * AR1 operates with or without LocoNet so, it can be used on non-Digitrax DCC systems, too.

Ersatzstecker grau für DB150, DB200+, DCS100 oder DCS200

Ersatzstecker schwarz für DB220

- komplett mit Netzteil 220V, 3A - Anleitung in englischer Sprache

Zephyr Express gives you simple to use Digitrax Complete Train Control for a great price. It offers simplified advanced train operation for any size layout and is fully expandable. You won’t have to start over when you want to do more with your railroad. Zephyr Express Set Includes: •DCS52 All-In-One Throttle/Command Station/Booster to run your layout •PS314 Power supply to provide power to run your DCS52 •One LT1 LocoNet Cable & Decoder Test Kit •Zephyr Express Quickstart Guide •Zephyr Express Manual •Digitrax Decoder Manual Zephyr Express Offers: •Cost effective entry level LocoNet Compatible system •Color 2.4” LCD Screen. •Large Backlit Keypad. •Speed control knob and direction switch with brake. •Integrated USB Computer Interface •Easy 2 and 4 digit addressing. •Smooth speed control. Run multiple trains at once without blocking! •Run up to 20 addresses at the same time on your system. •Run up to 20 throttles at the same time on your system. Jump Ports for using DC power packs as additional throttles •Use one or two smooth DC power packs as throttles to control DCC equipped locomotives. •Simple, cost effective way to add more throttles to your Zephyr Express set. •Makes it easy to share the fun of DCC with layout visitors and young operators. •Functions on locos controlled by Jump throttles remain active. Over 9000 Locomotive Addresses •Use Address 00 to run one or more locos without DCC decoders •Two Digit Addressing is easy to use. (Address 01-127) •Four Digit Addressing-use the number painted on your engines as its address. 3.0 Amps of Power to run multiple trains. •Booster outputs 13V DC for safe operation in N and HO scales. Function Control •Control lights and sound with 29 functions (F0-F28) •Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down. •Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder). Stationary Decoders, Turnout Control & Turnout Position Reporting •Access to stationary decoder control for turnouts and other devices. •Control 2000+ stationary decoder addresses. Consisting •Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos. •Advanced consisting, allows only advanced consist capable mobile decoders. •Basic consisting, program decoders to run on same address. Decoder Programming •Built in read/write programmer that can read and write all CVs. •Supports Direct programming (Digitrax preferred method). Also supports paged & register mode programming. •Operations mode programming can be used to program decoders on the layout. •Blast Mode Programming for Sound Expandability with Digitrax LocoNet •Use Zephyr Express as a starting point for your Digitrax LocoNet System, then add components. •Use Zephyr Express as an expansion set with Digitrax equipment you already have installed. •Add Radio or IR via LocoNet. Just plug-in a UR90, or UR92 receiver and add IR and/or Radio throttles. Comes Complete with DCS52 Command Station, PS314 Power Supply, LT1 LocoNet Cable and Decoder Tester, System Reference Manual and Decoder Manual.

DNDP 5-Pack Dummy plug for Digitrax N scale Harness system Lets you run locos as DC or DCC For DC only operation use the dummy plug with either DNWH or DNWHPS For DCC operation remove the DNDP and replacewith a decoder 5-Pack

Isolates segments of your LocoNet layout Protects segments of your LocoNet layouts Extends large LocoNet installations of more than 20 devices. Acts as a Diagniostic tool if LocoNet network problems occur. FCC Part 15, Class B RFI compliant. If a wiring or signal problems occur on any ;standard LocoNet section that the LNRP is connecting and monitoring, the LNRP will act to internally disconnect the faulty standard LocoNet segment so that the protected LocoNet can continue operating. If the fault is removed, the LNRP will typically automatically reconnect and resume operations on the ;standard LocoNet segment.

The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps. The apps available can be downloaded from this page. •Wi-Fi interface to a Digitrax LocoNet for up to four compatible mobile Wi-Fi devices and Apps. •Compatible with most Android and Apple devices running supported throttle apps •Easy Setup and Configuration. A single LNWI works ‘out of the box’, with no additional configuration required. •Provides up to 32 LocoNet Throttle functionality per LNWI, with compatible apps and Command Station. •Up to 8 LNWI can be supported per LocoNet •Multiple LNWI units automatically resolve SSID with no additional configuration •Optional Wi-Fi WPA2 security for layout operations in public. •Option switches to fully customize all device settings •LocoNet Compatible

Kabel & Decoder Test Kit und Anschlusskabel, Anleitung in Deutsch.

Computerinterface für LocoNet, auch zum programmieren, zum Anschluss Ihres Computers an das LocoNet. Für IBM kompatibelen COM oder RS232 Port, mit englischer Anleitung.

Jetzt auch Handbuch mit 14 Seiten in Deutsch!

Viefach Kehrschleifenmodul mit Power Manager. Vier unabhängige Sektor-Relais, die jeweils als Kurzschlussschutz oder Kerhschleifenumschaltung verwendet werden können, Anleitung in Deutsch und Englisch.

Viefach Kehrschleifenmodul mit Power Manager. Vier unabhängige Sektor-Relais, die jeweils als Kurzschlussschutz oder Kerhschleifenumschaltung verwendet werden können, - 4 Power Manager sub-districts. - Upgraded replacement for PM42, fully encased. - Fully connectorized installation. - Each Power sub-district / Detection Section (DS) supports Auto-reverse or Short circuit management. - Each DS supports Occupancy detection. - Each DS supports Transponding detection. - Allows Mainline CV Read/Write program of compatible decoders. - Remote LED status support. - Series7 style advanced installation support using DT602. - Replaces PM42 Quad Power Manager.

Loconet Universal Steckdose mit 5 Anschlüssen (2 x RJ12 6 pin LocoNet vorne und hinten 3 x RJ12 6 pin LocoNet). Zusätzlich Hilfsspannungseingang für die Stromversorgung der Handregler bei abgeschalteter Anlage,

inklusive SPROG 3 Programmer, DecoderPro und Installationssoftware zum Download, USB Kabel Es wird ein Netzteil mit 12V und 3-4 Ampere separat benötigt und ist nicht enthalten! Dieses Gerät wird zum Programmieren und Auslesen von Decodern über den PC verwendet, Es wird ein Gleis und das Netzteil angeschlossen, sowie das Gerät per USB an den Computer verbunden. Dann kann der Decoder über die DecoderPro Software problemlos ausgelesen und neu programmiert werden. Auch ein sofortiger Test der neuen Einstellungen ist auf dem angeschlossenen Gleis möglich. So kann man bequem Lichtfunktionen, Geschwindigkeitskurven, Funktionen, usw. einstellen und sofort testen. SPROG ist kompatibel zu allen Decodern sämtlicher Hersteller die nach dem NMRA Standard hergestellt werden.

- komplett mit Netzteil

DCS210 Central Unit / Booster 8 A, DT602 Handregler mit 2.4” LCD Anzeige. Handbuch in Englisch, UP-5 Steckdose. PS615 Netzteil 14, 28, 128 Fahrstufen für jede Lok individuell einstellbar. Analoge Loks fahren auf Adresse 00. Das Set enthält: * DCS210 8A Command Station/Booster * DT602 Super LocoNet Handsteuergerät * UP5 Universal Panel * PS615 Netzteil The DT602 Advanced Super Throttle & DCS210+ Advanced Command Station Offers Works with compatible LocoNet systems Color 2.4” LCD Display Screen Advanced menu system and displays Built-in scrolling help and prompting Soft ON/OFF switch, with zero OFF power-drain Advanced display Power Saving for longer wireless battery operation No more 9V batteries to remove! Throttles are now powered in wireless modes by 3 AA cells! Can use recharged AA batteries Available in standard tethered or Radio Duplex Duplex Scan for available Networks and radio signal strength. Run without cords! All throttles come with a LocoNet cord that can be unplugged, and is replaceable Dual throttle controls let you control two locos simultaneously Run locomotives with “encoder click” knobs for both speed and direction control Full numeric keypad makes loco selection simple Control light and sound effects functions with the press of a button Control 29 functions (F0-F28). Function active/inactive indicators Convenient step-by-step throttle option set up Supports simplified decoder programming Simplified 2 or 4 digit addressing setup Over 9,000 locomotive decoder addresses Supports turnout and stationary decoder control Over 2000 turnout decoder addresses Fast clock display Recall feature Advanced Route editor USB Interface Big System Capacity for Big Layouts Run up to 100 addresses at the same time on your system. Run up to 100 throttles at the same time on your system. Over 9000 Locomotive Addresses Address 00 for operation of one loco or MU consist without decoders Two Digit Addressing is easy to use. (Address 01-127) Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+) 5 or 8 Amps of Power to Run More Trains Selectable Scale Voltage for Safe Operation in ALL Scales Customizable Voltage Settings 5 amps of power with included PS615 power supply 8 amps with PS2012E power supply (sold separately) Function Control Control 29 functions (F0-F28). Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down. Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities). Two DCC Outputs are Better than One! Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders! Use one output for a braking section while the other runs the layout. Decoder Programming Built in read/write programmer lets you program and read back CV values. Supports Paged programming (Digitrax preferred method). Also supports direct, register and ops mode programming Consisting Supports Universal consisting (Digitrax preferred method). Allows ALL locos to be consisted prototypically, even analog locos. Advanced consisting and Basic consisting, too! Nested consisting where consists can be consisted together. Stationary Decoders, Turnout Control & Turnout Position Reporting Access to stationary decoder control for turnouts and other devices. DT602 reports turnout position based on last command sent. Control 2000+ stationary decoder addresses. Routes Turnout List/Route capability to simplify complex yard operations. EZ routes button for simplified Command Station route programming Customizable System Options Turn audible warnings on or off. Set up purging options. Multi-format command station mode. Loco Reset button for easy system purging UP5 Universal Panel Makes LocoNet hook up simple! 2 LocoNet jacks for hooking up your LocoNet network. 3 throttle jacks for hooking up throttles and other non-RailSync devices. Expandability Evolution is just the beginning for large, complex layouts that emphasize prototypical operations. With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more. DCS210+ comes with 3 LocoNet ports for easy expandability and a USB interface! Other Advanced Features IPL updatable firmware for continued product improvements Device Query and Device Statistics to help with troubleshooting Input Mode to help set up detection on your layout Uses Expanded slots

- komplett mit Netzteil

DCS-210 Central Unit / Booster 8 A, DT602D Funk- Handregler mit grosser Anzeige,Funksender eingebaut. Handbuch in Englisch, UR-93 Empänger. PS615 Netzteil. Analoge Loks fahren auf Adresse 00. Das Set enthält: * DCS210 8A Command Station/Booster * DT602D Super LocoNet Handsteuergerät (Funk- Betrieb möglich) * UR93 Universal Panel (Funk Empänger) * PS615 Netzteil für DCS210 * Netzteil für UR93 The DT602D Advanced Super Throttle & DCS210 Advanced Command Station Offers Works with compatible LocoNet systems Color 2.4” LCD Display Screen Full Duplex radio when paired with a UR92 or compatible Duplex Transceiver (sold separately) Advanced menu system and displays Built-in scrolling help and prompting Soft ON/OFF switch, with zero OFF power-drain Advanced display Power Saving for longer wireless battery operation Throttles are now powered in wireless modes by 3 AA cells! No more 9V batteries to remove! Can use recharged AA batteries Works in standard tethered, IR or Radio Duplex modes Duplex Scan for available Networks and radio signal strength. Run without cords! All throttles come with a LocoNet cord that can be unplugged, and is replaceable Dual throttle controls let you control two locos simultaneously Run locomotives with “encoder click” knobs for both speed and direction control Full numeric keypad makes loco selection simple Control light and sound effects functions with the press of a button Control 29 functions (F0-F28). Function active/inactive indicators Convenient step-by-step throttle option set up Supports simplified decoder programming Simplified 2 or 4 digit addressing setup Over 9,000 locomotive decoder addresses Supports turnout and stationary decoder control Over 2000 turnout decoder addresses Fast clock display Recall feature Advanced Route editor Big System Capacity for Big Layouts Run up to 100 addresses at the same time on your system. Run up to 100 throttles at the same time on your system. Over 9000 Locomotive Addresses Address 00 for operation of one loco or MU consist without decoders Two Digit Addressing is easy to use. (Address 01-127) Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+) 5 or 8 Amps of Power to Run More Trains Selectable Scale Voltage for Safe Operation in ALL Scales Customizable Voltage Settings 5 amps of power with included PS615 power supply 8 amps with PS2012E power supply (sold separately) Function Control Control 29 functions (F0-F28). Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down. Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities). Two DCC Outputs are Better than One! Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders! Use one output for a braking section while the other runs the layout. Decoder Programming Built in read/write programmer lets you program and read back CV values. Supports Paged programming (Digitrax preferred method). Also supports direct, register and ops mode programming Consisting Supports Universal consisting (Digitrax preferred method). Allows ALL locos to be consisted prototypically, even analog locos. Advanced consisting and Basic consisting, too! Nested consisting where consists can be consisted together. Stationary Decoders, Turnout Control & Turnout Position Reporting Access to stationary decoder control for turnouts and other devices. DT602 reports turnout position based on last command sent. Control 2000+ stationary decoder addresses. Routes Turnout List/Route capability to simplify complex yard operations. EZ routes button for simplified Command Station route programming Customizable System Options Turn audible warnings on or off. Set up purging options. Multi-format command station mode. Loco Reset button for easy system purging UR93 Duplex Radio Transceiver Panel Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support). More than double the radio range of UR92 Duplex units. Plug and Play setup, PS14 Universal power supply included. Compatible to be mixed with UR92 LocoNet Duplex Radio systems, for added coverage and reception. Status LEDS. Supports combinations of DT602D/DE and DT500D, DT400D and UT4D Duplex Radio throttles. UR93E available for countries that require EN-300-328 Wireless conformity. Expandability Evolution is just the beginning for large, complex layouts that emphasize prototypical operations. With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more. DCS210+ comes with 3 LocoNet ports for easy expandability and a USB Interface! Other Advanced Features IPL updatable firmware for continued product improvements Device Query and Device Statistics to help with troubleshooting Input Mode to help set up detection on your layout Uses Expanded slots

Grosser Handregler mit Farbdisplay und voller Programmier- möglichkeit und Infrarot-Fernbedienung, Handbuch in Englisch, 29 Funktionen. - Works with compatible LocoNet systems - Color 2.4” LCD Display Screen - Advanced menu system and displays - Built-in scrolling help and prompting - Soft ON/OFF switch, with zero OFF power-drain - Advanced display Power Saving for longer wireless battery operation - No more 9V batteries to remove! Throttles are now powered in wireless modes by 3 AA cells! - Can use recharged AA batteries - Available in standard tethered or Radio Duplex - Duplex Scan for available Networks and radio signal strength. Run without cords! - All throttles come with a LocoNet cord that can be unplugged, and is replaceable - Dual throttle controls let you control two locos simultaneously - Run locomotives with “encoder click” knobs for both speed and direction control - Full numeric keypad makes loco selection simple - Control light and sound effects functions with the press of a button - Control 29 functions (F0-F28). - Function active/inactive indicators - Convenient step-by-step throttle option set up - Supports simplified decoder programming - Simplified 2 or 4 digit addressing setup - Over 9,000 locomotive decoder addresses - Supports turnout and stationary decoder control - Over 2000 turnout decoder addresses - Fast clock display - Recall feature - Advanced Route editor

Grosser Handregler mitFarbdisplay und voller Programmier- möglichkeit und Funk-Fernbedienung, Handbuch in Englisch, 29 Funktionen. - Works with compatible LocoNet systems - Color 2.4” LCD Display Screen - Advanced menu system and displays - Built-in scrolling help and prompting - Soft ON/OFF switch, with zero OFF power-drain - Advanced display Power Saving for longer wireless battery operation - No more 9V batteries to remove! Throttles are now powered in wireless modes by 3 AA cells! - Can use recharged AA batteries - Available in standard tethered or Radio Duplex - Duplex Scan for available Networks and radio signal strength. Run without cords! - All throttles come with a LocoNet cord that can be unplugged, and is replaceable - Dual throttle controls let you control two locos simultaneously - Run locomotives with “encoder click” knobs for both speed and direction control - Full numeric keypad makes loco selection simple - Control light and sound effects functions with the press of a button - Control 29 functions (F0-F28). - Function active/inactive indicators - Convenient step-by-step throttle option set up - Supports simplified decoder programming - Simplified 2 or 4 digit addressing setup - Over 9,000 locomotive decoder addresses - Supports turnout and stationary decoder control - Over 2000 turnout decoder addresses - Fast clock display - Recall feature - Advanced Route editor - For “DCE”

Für die Stromversorgung von SPROG, UP5, SE8C, LNRP, BDL168, UR90, UR91, DS54 & PM42 und andere. 12V 5A 60W DC, zum Anschluss an 220V Netz. Passt auch an den Kato Fahrtregler!

Zum einfachen Programmieren und Auslesen der Lokadressen von DCC-Loks. Entweder über Anschluß an das Programmergleis oder Einstecken des Decoders über die 8-Pin-Schnittstelle direkt an das Gerät. Resetten des Decoders ist ebenfalls möglich.