Innovation! Delivery June 2026

• with DCC Decoder
• with Sound

Road Number Specific ScaleTrains New road numbers Era: 2023 to present Series 3650 to 3674; built 7/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery June 2026

• Ready for use with DCC (DCC interface)

Road Number Specific ScaleTrains New road numbers Era: 2023 to present Series 3650 to 3674; built 7/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery June 2026

• with DCC Decoder
• with Sound

Road Number Specific ScaleTrains New road numbers Era: 2023 to present Series 3650 to 3674; built 7/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery June 2026

• Ready for use with DCC (DCC interface)

Road Number Specific ScaleTrains New road numbers Era: 2023 to present Series 3650 to 3674; built 7/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery June 2026

• with DCC Decoder
• with Sound

Road Number Specific ScaleTrains New road numbers Era: 2023 to present Series 3650 to 3674; built 7/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery June 2026

• Ready for use with DCC (DCC interface)

Road Number Specific ScaleTrains New road numbers Era: 2023 to present Series 3650 to 3674; built 7/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery June 2026

• with DCC Decoder
• with Sound

Road Number Specific ScaleTrains New road numbers Era: 2023 to present Series 3650 to 3674; built 7/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery June 2026

• Ready for use with DCC (DCC interface)

Road Number Specific ScaleTrains New road numbers Era: 2023 to present Series 3650 to 3674; built 7/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery June 2026

• with DCC Decoder
• with Sound

Road Number Specific ScaleTrains New road numbers Era: 2023 to present Series 3650 to 3674; built 7/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery June 2026

• Ready for use with DCC (DCC interface)

Road Number Specific ScaleTrains New road numbers Era: 2023 to present Series 3650 to 3674; built 7/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery June 2026

• with DCC Decoder
• with Sound

Road Number Specific ScaleTrains New road numbers Era: 2023 to present Series 3650 to 3674; built 7/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery June 2026

• Ready for use with DCC (DCC interface)

Road Number Specific ScaleTrains New road numbers Era: 2023 to present Series 3650 to 3674; built 7/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery June 2026

• with DCC Decoder
• with Sound

Road Number Specific ScaleTrains New roadname Era: 2024 to present Series CPKC 7430 to 7437 Road numbers 7430-7434 ex-GECX 2025, 2028, 2030-2032; ex-Baffinland 7001-7005 built 2014 Sand box clean out door with knuckle buster latch Nose door with window Road numbers 7435-7437 ex-GECX 2020-2022; ex-Baffinland 7006-7008, built 2013 Sand box clean out door with handle and rotating hinge Nose door without window Fully-assembled Multiple road numbers Operating LED ground light on left side of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Access door in front of left side air intake grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Early production radiator grilles with tall grille on 3rd from front radiator door Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets Battery charging receptacle on right sidesill under battery box doors AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side, rear is Spillx fuel fill End of train device (EOT) basket on left rear of tank Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery June 2026

• Ready for use with DCC (DCC interface)

Road Number Specific ScaleTrains New roadname Era: 2024 to present Series CPKC 7430 to 7437 Road numbers 7430-7434 ex-GECX 2025, 2028, 2030-2032; ex-Baffinland 7001-7005 built 2014 Sand box clean out door with knuckle buster latch Nose door with window Road numbers 7435-7437 ex-GECX 2020-2022; ex-Baffinland 7006-7008, built 2013 Sand box clean out door with handle and rotating hinge Nose door without window Fully-assembled Multiple road numbers Operating LED ground light on left side of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Access door in front of left side air intake grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Early production radiator grilles with tall grille on 3rd from front radiator door Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets Battery charging receptacle on right sidesill under battery box doors AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side, rear is Spillx fuel fill End of train device (EOT) basket on left rear of tank Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery June 2026

• with DCC Decoder
• with Sound

Road Number Specific ScaleTrains New roadname Era: 2024 to present Series CPKC 7430 to 7437 Road numbers 7430-7434 ex-GECX 2025, 2028, 2030-2032; ex-Baffinland 7001-7005 built 2014 Sand box clean out door with knuckle buster latch Nose door with window Road numbers 7435-7437 ex-GECX 2020-2022; ex-Baffinland 7006-7008, built 2013 Sand box clean out door with handle and rotating hinge Nose door without window Fully-assembled Multiple road numbers Operating LED ground light on left side of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Access door in front of left side air intake grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Early production radiator grilles with tall grille on 3rd from front radiator door Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets Battery charging receptacle on right sidesill under battery box doors AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side, rear is Spillx fuel fill End of train device (EOT) basket on left rear of tank Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery June 2026

• Ready for use with DCC (DCC interface)

Road Number Specific ScaleTrains New roadname Era: 2024 to present Series CPKC 7430 to 7437 Road numbers 7430-7434 ex-GECX 2025, 2028, 2030-2032; ex-Baffinland 7001-7005 built 2014 Sand box clean out door with knuckle buster latch Nose door with window Road numbers 7435-7437 ex-GECX 2020-2022; ex-Baffinland 7006-7008, built 2013 Sand box clean out door with handle and rotating hinge Nose door without window Fully-assembled Multiple road numbers Operating LED ground light on left side of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Access door in front of left side air intake grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Early production radiator grilles with tall grille on 3rd from front radiator door Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets Battery charging receptacle on right sidesill under battery box doors AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side, rear is Spillx fuel fill End of train device (EOT) basket on left rear of tank Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery June 2026

• with DCC Decoder
• with Sound

Road Number Specific ScaleTrains New roadname Era: 2024 to present Series CPKC 7430 to 7437 Road numbers 7430-7434 ex-GECX 2025, 2028, 2030-2032; ex-Baffinland 7001-7005 built 2014 Sand box clean out door with knuckle buster latch Nose door with window Road numbers 7435-7437 ex-GECX 2020-2022; ex-Baffinland 7006-7008, built 2013 Sand box clean out door with handle and rotating hinge Nose door without window Fully-assembled Multiple road numbers Operating LED ground light on left side of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Access door in front of left side air intake grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Early production radiator grilles with tall grille on 3rd from front radiator door Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets Battery charging receptacle on right sidesill under battery box doors AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side, rear is Spillx fuel fill End of train device (EOT) basket on left rear of tank Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery June 2026

• Ready for use with DCC (DCC interface)

Road Number Specific ScaleTrains New roadname Era: 2024 to present Series CPKC 7430 to 7437 Road numbers 7430-7434 ex-GECX 2025, 2028, 2030-2032; ex-Baffinland 7001-7005 built 2014 Sand box clean out door with knuckle buster latch Nose door with window Road numbers 7435-7437 ex-GECX 2020-2022; ex-Baffinland 7006-7008, built 2013 Sand box clean out door with handle and rotating hinge Nose door without window Fully-assembled Multiple road numbers Operating LED ground light on left side of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Access door in front of left side air intake grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Early production radiator grilles with tall grille on 3rd from front radiator door Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets Battery charging receptacle on right sidesill under battery box doors AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side, rear is Spillx fuel fill End of train device (EOT) basket on left rear of tank Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery June 2026

• with DCC Decoder
• with Sound

Road Number Specific ScaleTrains New roadname Era: 2024 to present Series CPKC 7430 to 7437 Road numbers 7430-7434 ex-GECX 2025, 2028, 2030-2032; ex-Baffinland 7001-7005 built 2014 Sand box clean out door with knuckle buster latch Nose door with window Road numbers 7435-7437 ex-GECX 2020-2022; ex-Baffinland 7006-7008, built 2013 Sand box clean out door with handle and rotating hinge Nose door without window Fully-assembled Multiple road numbers Operating LED ground light on left side of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Access door in front of left side air intake grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Early production radiator grilles with tall grille on 3rd from front radiator door Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets Battery charging receptacle on right sidesill under battery box doors AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side, rear is Spillx fuel fill End of train device (EOT) basket on left rear of tank Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery June 2026

• Ready for use with DCC (DCC interface)

Road Number Specific ScaleTrains New roadname Era: 2024 to present Series CPKC 7430 to 7437 Road numbers 7430-7434 ex-GECX 2025, 2028, 2030-2032; ex-Baffinland 7001-7005 built 2014 Sand box clean out door with knuckle buster latch Nose door with window Road numbers 7435-7437 ex-GECX 2020-2022; ex-Baffinland 7006-7008, built 2013 Sand box clean out door with handle and rotating hinge Nose door without window Fully-assembled Multiple road numbers Operating LED ground light on left side of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Access door in front of left side air intake grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Early production radiator grilles with tall grille on 3rd from front radiator door Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets Battery charging receptacle on right sidesill under battery box doors AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side, rear is Spillx fuel fill End of train device (EOT) basket on left rear of tank Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound-ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector