In englischer Sprache, über 200 Seiten in Farbe Spur N, H0, O und G

In deutscher Sprache, über 124 Seiten in Farbe Spur N, H0, O und G

Inhalt: 1 Hob-e-Tac® Adhesive 1 Paintbrush 1 Scenic Cement™ 1 Black Color (pre-diluted 16 to 1) 1 Burnt Umber Color (pre-diluted 8 to 1) 1 Yellow Ocher Color (pre-diluted 8 to 1) 1 Earth Undercoat Pigment (pre-diluted 1 to 1) 1 Green Blend Blended Turf 1 Medium Green Bushes 1 Medium Green Clump-Foliage™ 1 Medium Green Coarse Turf 1 Yellow Grass Fine Turf 6 Foam Brushes 6 Scenic Glue™ 6 Mountain Dioramas 6 Sifter Lids (for Plastic Cups) 6 Spray Bottles 6 Stir Sticks 12 Tree Armatures 30 Plastic Cups 1 Scenery Clinic DVD

STRAIGHT KIT Kato and Woodland® have teamed up with a brand new project to make it easier than ever for modelers to get into scenery and layout building, thanks to T-Trak(TM) and UNITRAK! These special T-Trak module kits are made by Woodland using their SubTerrain Lightweight Layout System®! Each SubTerrain T-Trak kit is made from lightweight, sculpt-able foam with wooden reinforcements that make them easy to assemble, transport, and shape into your desired form! Included in each set are a variety of sculpting aides, like a Woodland Shaper Sheet® and sculpting plaster, as well as all the tools you need to assemble the completed module kit – even glue, and of course, Kato UNITRACK! Learn more about the T-Trak module system of standards here: www.ttrak.org The Subterrain Straight T-Trak Module includes the following items: 9 3/4" Concrete Tie + 2 7/16" Concrete Tie Feeder Track Special T-Trak Double Track feeder cable 2 x 10oz bags of Shaper Sheet Plaster 1 x 18" x 24" Woodland Shaper Sheet 1 x Bottle Foam Tack Glue 1 x Riser Assembly 2 x Masonite Support boards 4 x Side Profile Boards 2 x Base Board Supports 4 x Leveling Bolts 12 x 2" Foam Nails 1 x Roll of 25 Sticky Dots Instruction Sheet

90-Degree Curved-Corner Kato and Woodland® have teamed up with a brand new project to make it easier than ever for modelers to get into scenery and layout building, thanks to T-Trak(TM) and UNITRAK! These special T-Trak module kits are made by Woodland using their SubTerrain Lightweight Layout System®! Each SubTerrain T-Trak kit is made from lightweight, sculpt-able foam with wooden reinforcements that make them easy to assemble, transport, and shape into your desired form! Included in each set are a variety of sculpting aides, like a Woodland Shaper Sheet® and sculpting plaster, as well as all the tools you need to assemble the completed module kit – even glue, and of course, Kato UNITRACK! Learn more about the T-Trak module system of standards here: www.ttrak.org The Subterrain Corner T-Trak Module includes the following items: 12 3/8"-11" Concrete Tie Curve + 2 x 12 3/8"-11" Concrete Tie Easement Curves 2 x 10oz bags of Shaper Sheet Plaster 1 x 18" x 24" Woodland Shaper Sheet 1 x Bottle Foam Tack Glue 1 x Riser Assembly 2 x Masonite Support boards 4 x Side Profile Boards 2 x Base Board Supports 4 x Leveling Bolts 12 x 2" Foam Nails 1 x Roll of 25 Sticky Dots Instruction Sheet

Zu Herstellung von Bergen, Felsen, Ladung, uvm..

53,11 € per 1000ml

4er Pack, ca. 61 x 6,5 x 1 cm (LBH)

Risers are installed wherever track will be laid on curves or straights. The pieces lift the track above the surrounding area, like the subroadbed on the prototype, so it's easy to add low-lying scenery such as a creek or other formations. Risers are offered in 1/2" (12.5cm), 3/4" (1.8cm), 1" (2.5cm), 2" (5cm) or 4" (10cm) heights. (Use the Incline Starters, 785-1412, 1413, 1416, each sold separately, to create varying grades.)

4er Pack, ca. 61 x 6,5 x 5 cm (LBH)

ca. 61 x 6,5 x 10 cm (LBH)

2 Percent (Each Section is 2' Long) Flexible inclines are designed to simplify adding changes in elevation along straight or curved tracks. The pre-cut foam sections are molded in 2, 3 or 4 percent grades, which takes the guesswork and complex math out of building different levels of track. The 2% Sections (#785-1410) raise the track 4" in 16'. The 3% Sections (#785-1415) elevate tracks 4-1/2" in 12'. Four Percent sections elevate trackage 4" in 8'. All sections measure 2-1/2" wide x 24" long.

- 4er Set von 4% Steigungsmodulen - Ohne teuren Werkzeuge, komplizierte Berechnungen und Staub! - Keinerlei Erfahrung notwendig - Jedes Modul ist 6,35 cm x 60,96 cm groß - Erhebt jeden Bahngleis um 10,16 cm in 243,84cm Die Steigungen sind flexibel und erlauben Ihnen einen gleichmäßigen Übergang von einer Höhe zur anderen. Um sie anzubringen, einfach die Steigung auf der Rampe zentrieren , die Enden am besten mit Schaumnägel (785-1432) fixieren und mit Hilfe von Schaumkleber (785-1446 oder 785-1444) anbringen. Starter sind identische Teile, die man entweder alleine benutzen kann oder im Set einsetzt um ihre Strecke steigen zu lassen.

2 Percent (Each Section is 2' Long) Incline starters can be used alone or combined with Incline Sets (785-1410, 1411 & 1416, each sold separately) to start your track on an incline or continue down grade. Two Percent (#785-1412) Starters raise the track elevation 1/2"; Four Percent Starters raise tracks 1". Each set includes eight identical pieces measuring 2-1/2" wide x 24" long.

4 Percent (Each Section is 2' Long) Incline starters can be used alone or combined with Incline Sets (785-1410, 1411 & 1416, each sold separately) to start your track on an incline or continue down grade. Two Percent (#785-1412) Starters raise the track elevation 1/2"; Four Percent Starters raise tracks 1". Each set includes eight identical pieces measuring 2-1/2" wide x 24" long.

Risers are installed wherever track will be laid on curves or straights. The pieces lift the track above the surrounding area, like the subroadbed on the prototype, so it's easy to add low-lying scenery such as a creek or other formations. Risers are offered in 1/2" (12.5cm), 3/4" (1.8cm), 1" (2.5cm), 2" (5cm) or 4" (10cm) heights. (Use the Incline Starters, 785-1412, 1413, 1416, each sold separately, to create varying grades.)

3 Percent Incline starters can be used alone or combined with Incline Sets (785-1410, 1411 & 1416, each sold separately) to start your track on an incline or continue down grade.

This Incline Set includes 6 sections that raise the elevation of your track from 0 to 4 1/2 inches within 12 feet. Incline Sets allow smooth transition from one height to another. To install, pin in place with Foam Nails and attach with Foam Tack Glue™ or the Low Temp Foam Glue Gun and Glue Sticks. Each piece measures 24" l x 2½" w

Jedes Teil ist 20,32cm hoch x 60,96cm lang Enthält zwei Profile Boards und zwei Connectors

30.4 cm x 60.9 cm 6 mm dick

30.4 cm x 60.9 cm 12 mm dick