Innovation! Delivery October 2026

Pre-order deadline: 2/23/2026

• with DCC Decoder
• with Sound

CSX/YN3.com/DP Sticker/PTC All-new model Era: 2022 to present Series 7000 to 7199; ex-CSX AC4400CW 4 to 30, built 10-11/94 and ex-CSX AC4400CW 31 to 115, built 1-4/95 Road number 7029; ex-CSX 18 No right side radiator wing access door Tall and wide plow with welded reinforcement plate Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab with shower caps Road number 7032; ex-CSX 4; 9103 No right side radiator wing access door Low and narrow plow with fileted coupler opening Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab with shower caps Road number 7033; ex-CSX 50 Right side radiator wing access door Tall and wide plow with angular and notched coupler opening Lost-wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab with shower caps Road number 7037; ex-CSX 109 Right side radiator wing access door Tall and wide plow with welded reinforcement plate Lost-wax brass cast Nathan AirChime K5LAR25 horn mounted on engine cab with shower caps Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front deck-mounted ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed high-mount cab number boards with separately controlled backlit LED-illumination* Directional LED-illuminated headlights Tall snowplow with MU hose openings and two (2) grab irons Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Outside loop uncoupling levers with down brackets 5-step stepwells with see-through steps Early - Tapered stepwell corner profile Walkway with front anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front low (cab) mounted headlight Right side nose door with window; security padlock with hasp Two-piece nose top grab irons Battery cabinet access door with latch GE safety cab with four (4) side windows Right side cab under floor access doors: 17 louver panels per door and circular style latches Left side cab under floor access doors: bolted X-panel with square punched screen HVAC unit Late - Rearward placed cab heater vent Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side JEM Communications PTC antenna farm with Sinclair antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and wide auxiliary cab filter box door Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Dual lifting lugs mounted to sides of clean air cab joint Late angled engine cab profile Late style engine cab door latches Low mounted lift rings on engine cab power assembly doors Three door latches per side on exhaust cab doors Early (round) engine cab roof profile Early flanged exhaust stack housing Raised radiator grills and shutter system Early (thin handle) engine compartment door latches 24 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Concave stamped brake wheel Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with non-cantilevered struts on all four sideframes and separately applied brake cylinders, single bracket air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service No speed recorder Graham-White 975-100 series air dryer Dual Graham-White (Prime) 975-075 air filters Early - without air reservoir drain notch 5,000-gallon fuel tank with vertical wide spaced weld seams. Wide flanged sight glass openings Single fuel fills per side Round and vertical analog fuel gauges; digital fuel gauges Fuel tank mounted steel bell Curved handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Functions Two (2) cube-type speakers Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

shipping weight: 2,200 kg

Information on product safety:
Manufacturer: Scale Trains, 4901 Old Tasso Road NE Cleveland, TN 37312, USA, www.scaletrains.com
Imported by: RD-Hobby Modellbahnen, Jaegersburger Str. 17,68649 Gross-Rohrheim, Deutschland, email@RD-Hobby.de