• Ready for use with DCC (DCC interface)

New paint scheme Era: Late 80s to Mid-90s Series ATSF 2746 to 2785 (rebuilt between 1982-1984) ATSF 2777 “Faded” ATSF Yellow w/ fresh paint touch-ups at various locations Mounting flanges from removed inertial air intake hoods remaining on long hood roof behind cab EOT antenna stand on right side of cab roof ATSF 2785 “Faded” ATSF Yellow w/ fresh paint touch-ups at various locations Mounting flanges from removed inertial air intake hoods remaining on long hood roof behind cab EOT antenna stand on left side of cab roof All road numbers feature: Front ATSF-style relocated LED-illuminated headlight with lenses in low short hood; blanked number board light mount GP30 cab with increased length on left (fireman’s) side, cab heater vents deleted, and flat center windshield section Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Blanked front and rear class lights with round plate LED-illuminated, printed and backlit cab number boards, and blanked long hood end number boards Vapor Corp. cab roof HVAC Front and rear multiple unit (MU) hose catch bars 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers with loop handles; two inner and two outer mounting brackets Modified pilot faces with uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle Dummy multiple unit (MU) receptacles with cable mounted to pilot face Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake, chain guard, and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Rectangular vent on left side of cab Sliding cab side windows Tall wind wings mounted fore of cab windows, left side, and small mirror on right side Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan AirChime K3LA horn mounted to right side cab roof eave. Large Sinclair Excalibur “ice skate” antenna (communications) mounted on a stand centered on the cab roof Accurate hood door and long hood detail Late single-panel inertial compartment with retrofitted latched and hinged access doors Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Late See-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; deleted outer brake shoes; and separate swing hanger detail Dimensionally accurate truck centers Aeroquip speed recorder on #2 axle, left side. Spare knuckle holders mounted to truck sideframes Frame-mounted bronze bell Prime air filter (can style) 2,600-gallon fuel tank sill skirt removed and relocated vertical gauges; round gauges in fuel tank sides; fuel fillers exposed Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-645D3A prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

• with DCC Decoder
• with Sound

New paint scheme Era: Late 80s to Mid-90s Series ATSF 2746 to 2785 (rebuilt between 1982-1984) ATSF 2777 “Faded” ATSF Yellow w/ fresh paint touch-ups at various locations Mounting flanges from removed inertial air intake hoods remaining on long hood roof behind cab EOT antenna stand on right side of cab roof ATSF 2785 “Faded” ATSF Yellow w/ fresh paint touch-ups at various locations Mounting flanges from removed inertial air intake hoods remaining on long hood roof behind cab EOT antenna stand on left side of cab roof All road numbers feature: Front ATSF-style relocated LED-illuminated headlight with lenses in low short hood; blanked number board light mount GP30 cab with increased length on left (fireman’s) side, cab heater vents deleted, and flat center windshield section Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Blanked front and rear class lights with round plate LED-illuminated, printed and backlit cab number boards, and blanked long hood end number boards Vapor Corp. cab roof HVAC Front and rear multiple unit (MU) hose catch bars 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers with loop handles; two inner and two outer mounting brackets Modified pilot faces with uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle Dummy multiple unit (MU) receptacles with cable mounted to pilot face Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake, chain guard, and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Rectangular vent on left side of cab Sliding cab side windows Tall wind wings mounted fore of cab windows, left side, and small mirror on right side Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan AirChime K3LA horn mounted to right side cab roof eave. Large Sinclair Excalibur “ice skate” antenna (communications) mounted on a stand centered on the cab roof Accurate hood door and long hood detail Late single-panel inertial compartment with retrofitted latched and hinged access doors Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Late See-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; deleted outer brake shoes; and separate swing hanger detail Dimensionally accurate truck centers Aeroquip speed recorder on #2 axle, left side. Spare knuckle holders mounted to truck sideframes Frame-mounted bronze bell Prime air filter (can style) 2,600-gallon fuel tank sill skirt removed and relocated vertical gauges; round gauges in fuel tank sides; fuel fillers exposed Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-645D3A prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

• Ready for use with DCC (DCC interface)

New paint scheme Era: Late 80s to Mid-90s Series ATSF 2746 to 2785 (rebuilt between 1982-1984) ATSF 2777 “Faded” ATSF Yellow w/ fresh paint touch-ups at various locations Mounting flanges from removed inertial air intake hoods remaining on long hood roof behind cab EOT antenna stand on right side of cab roof ATSF 2785 “Faded” ATSF Yellow w/ fresh paint touch-ups at various locations Mounting flanges from removed inertial air intake hoods remaining on long hood roof behind cab EOT antenna stand on left side of cab roof All road numbers feature: Front ATSF-style relocated LED-illuminated headlight with lenses in low short hood; blanked number board light mount GP30 cab with increased length on left (fireman’s) side, cab heater vents deleted, and flat center windshield section Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Blanked front and rear class lights with round plate LED-illuminated, printed and backlit cab number boards, and blanked long hood end number boards Vapor Corp. cab roof HVAC Front and rear multiple unit (MU) hose catch bars 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers with loop handles; two inner and two outer mounting brackets Modified pilot faces with uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle Dummy multiple unit (MU) receptacles with cable mounted to pilot face Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake, chain guard, and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Rectangular vent on left side of cab Sliding cab side windows Tall wind wings mounted fore of cab windows, left side, and small mirror on right side Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan AirChime K3LA horn mounted to right side cab roof eave. Large Sinclair Excalibur “ice skate” antenna (communications) mounted on a stand centered on the cab roof Accurate hood door and long hood detail Late single-panel inertial compartment with retrofitted latched and hinged access doors Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Late See-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; deleted outer brake shoes; and separate swing hanger detail Dimensionally accurate truck centers Aeroquip speed recorder on #2 axle, left side. Spare knuckle holders mounted to truck sideframes Frame-mounted bronze bell Prime air filter (can style) 2,600-gallon fuel tank sill skirt removed and relocated vertical gauges; round gauges in fuel tank sides; fuel fillers exposed Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-645D3A prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

• with DCC Decoder
• with Sound

New paint scheme Era: Late 80s to Mid-90s Series ATSF 2746 to 2785 (rebuilt between 1982-1984) ATSF 2777 “Faded” ATSF Yellow w/ fresh paint touch-ups at various locations Mounting flanges from removed inertial air intake hoods remaining on long hood roof behind cab EOT antenna stand on right side of cab roof ATSF 2785 “Faded” ATSF Yellow w/ fresh paint touch-ups at various locations Mounting flanges from removed inertial air intake hoods remaining on long hood roof behind cab EOT antenna stand on left side of cab roof All road numbers feature: Front ATSF-style relocated LED-illuminated headlight with lenses in low short hood; blanked number board light mount GP30 cab with increased length on left (fireman’s) side, cab heater vents deleted, and flat center windshield section Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Blanked front and rear class lights with round plate LED-illuminated, printed and backlit cab number boards, and blanked long hood end number boards Vapor Corp. cab roof HVAC Front and rear multiple unit (MU) hose catch bars 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers with loop handles; two inner and two outer mounting brackets Modified pilot faces with uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle Dummy multiple unit (MU) receptacles with cable mounted to pilot face Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake, chain guard, and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Rectangular vent on left side of cab Sliding cab side windows Tall wind wings mounted fore of cab windows, left side, and small mirror on right side Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan AirChime K3LA horn mounted to right side cab roof eave. Large Sinclair Excalibur “ice skate” antenna (communications) mounted on a stand centered on the cab roof Accurate hood door and long hood detail Late single-panel inertial compartment with retrofitted latched and hinged access doors Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Late See-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; deleted outer brake shoes; and separate swing hanger detail Dimensionally accurate truck centers Aeroquip speed recorder on #2 axle, left side. Spare knuckle holders mounted to truck sideframes Frame-mounted bronze bell Prime air filter (can style) 2,600-gallon fuel tank sill skirt removed and relocated vertical gauges; round gauges in fuel tank sides; fuel fillers exposed Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-645D3A prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

• Ready for use with DCC (DCC interface)

New paint scheme Era: Late 80s to Mid-90s Series ATSF 2746 to 2785 (rebuilt between 1982-1984) ATSF 2777 “Faded” ATSF Yellow w/ fresh paint touch-ups at various locations Mounting flanges from removed inertial air intake hoods remaining on long hood roof behind cab EOT antenna stand on right side of cab roof ATSF 2785 “Faded” ATSF Yellow w/ fresh paint touch-ups at various locations Mounting flanges from removed inertial air intake hoods remaining on long hood roof behind cab EOT antenna stand on left side of cab roof All road numbers feature: Front ATSF-style relocated LED-illuminated headlight with lenses in low short hood; blanked number board light mount GP30 cab with increased length on left (fireman’s) side, cab heater vents deleted, and flat center windshield section Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Blanked front and rear class lights with round plate LED-illuminated, printed and backlit cab number boards, and blanked long hood end number boards Vapor Corp. cab roof HVAC Front and rear multiple unit (MU) hose catch bars 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers with loop handles; two inner and two outer mounting brackets Modified pilot faces with uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle Dummy multiple unit (MU) receptacles with cable mounted to pilot face Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake, chain guard, and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Rectangular vent on left side of cab Sliding cab side windows Tall wind wings mounted fore of cab windows, left side, and small mirror on right side Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan AirChime K3LA horn mounted to right side cab roof eave. Large Sinclair Excalibur “ice skate” antenna (communications) mounted on a stand centered on the cab roof Accurate hood door and long hood detail Late single-panel inertial compartment with retrofitted latched and hinged access doors Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Late See-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; deleted outer brake shoes; and separate swing hanger detail Dimensionally accurate truck centers Aeroquip speed recorder on #2 axle, left side. Spare knuckle holders mounted to truck sideframes Frame-mounted bronze bell Prime air filter (can style) 2,600-gallon fuel tank sill skirt removed and relocated vertical gauges; round gauges in fuel tank sides; fuel fillers exposed Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-645D3A prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Innovation! Delivery December 2025

Road Number Specific ScaleTrains 6-Pack with Car Numbers: 598000, 598062, 598098, 598123, 598144, 598167

Innovation! Delivery December 2025

Road Number Specific ScaleTrains 6-Pack with Car Numbers: 598000, 598062, 598098, 598123, 598144, 598167

Innovation! Delivery December 2025

Road Number Specific ScaleTrains 6-Pack with Car Numbers: 598045, 598082, 598189, 598237, 598262, 598291

Innovation! Delivery December 2025

Road Number Specific ScaleTrains 6-Pack with Car Numbers: 598045, 598082, 598189, 598237, 598262, 598291

Innovation! Delivery December 2025

Road Number Specific ScaleTrains 6-Pack with Car Numbers: 598004, 598045, 598126, 598145, 598183, 598244

Innovation! Delivery December 2025

Road Number Specific ScaleTrains 6-Pack with Car Numbers: 598004, 598045, 598126, 598145, 598183, 598244

Innovation! Delivery December 2025

Road Number Specific ScaleTrains 6-Pack with Car Numbers: 598078, 598139, 598152, 598153, 598234, 598264

Innovation! Delivery December 2025

Road Number Specific ScaleTrains 6-Pack with Car Numbers: 598078, 598139, 598152, 598153, 598234, 598264

Innovation! Delivery December 2025

Road Number Specific ScaleTrains 6-Pack with Car Numbers: 598035, 598121, 598140

Innovation! Delivery December 2025

Road Number Specific ScaleTrains 6-Pack with Car Numbers: 598035, 598121, 598140

Innovation! Delivery December 2025

Road Number Specific ScaleTrains

Innovation! Delivery December 2025

Road Number Specific ScaleTrains

Innovation! Delivery December 2025

Road Number Specific ScaleTrains

• with DCC Decoder
• with Sound

Road Number Specific ScaleTrains All-new model Era: Mid-1960s Series UP 800-874, built 7-10/1962, Phase Ib2 Road numbers 800, 812, 820, 835, 852, and 863 UP “Dependable Transportation” Scheme Fully-assembled Multiple road numbers Directional LED headlights Class lights (non-operating) Printed and LED-illuminated cab and rear number boards* Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Body mounted knuckle couplers; Micro-Trains® compatible Coupler box accepts Micro-Trains 1015/1016 couplers without modification Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted dual multiple unit (MU) receptacle stands with field loop receptacles “Short” stepwells Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern 81” GP30 low short hood with ratchet handbrake, chain guard, and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents No cab vents Tall mirrors mounted fore and aft of cab side windows on both sides of cab UP canvas sun awnings Lost-wax brass cast Leslie S-3-LR horn with clearance bracket, mounted between first and second radiator fans Accurate hood door and long hood detail Early 2-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan on riser ring Late dynamic brake intake grills with horizontal wires through vertical vanes 6-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square door-style sand fill door on right side hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, windshield wipers, trainline hoses with silver gladhands, air tanks and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible even under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 3/4” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” One (1) cube-type speakers Prime mover sound 16-cylinder 567D3 prime mover sound Operates on both DC and DCC layouts

• Ready for use with DCC (DCC interface)

BNSF/Heritage/Small Circle-Cross Nose Logo New roadname Era: Late 1990s to Early 2000s Series 7000 to 7053; built 1977-78 (Former BN – same numbers) Fully-assembled Multiple road numbers Operating LED-illuminated front deck-mounted ditch lights* BN-style latched battery box doors with narrow louvers and lift-off hinges Blanked front and rear class lights Printed and LED-illuminated number boards* Front EMD-style low pilot plow with grab irons and without multiple unit (MU) hose doors 3-hose multiple unit (MU) hose clusters with silver gladhands Body mounted knuckle couplers; Micro-Trains® compatible Coupler box accepts Micro-Trains 1015/1016 couplers without modification Straight uncoupling levers with loop handles front and rear and four inner and two outer mounting brackets Notched pilot faces with high angled lifting slots Pilot face mounted multiple unit (MU) receptacle Dummy multiple unit (MU) receptacle mounted to pilot face "Tall" stepwells Wide “blunt” front pilot anticlimber Handrail set with anticlimber front; inward facing rear end rail mounting brackets and chain Late “fixed” rear drop step Scale sectioned treadplate detail on walkways Round walkway lights (non-operating) 88" low short hood with wheel handbrake Late cab sub-base doors with lift-off hinges Front retrofitted LED-illuminated headlight cut into nose, blanked number board light Dash two cab with bolted side window panels Detailed cab interior with floor, rear wall, seats, and standard AAR control stand Rear cab side vent on left side Small mirrors mounted fore of cab side windows on both sides of cab Standard EMD sunshades and long sunshade tracks Lost wax brass cast Nathan AirChime K3LA horn relocated to the long hood roof Tall and short (comm. and EOT) “Firecracker” antennas on cab roof Early electrical cabinet "zig-zag" seam, further from rear of cab Late welded ECAFB Intermediate inertial air intake grills with top drip rail Standard turbo exhaust stack Accurately profiled standard-range dynamic brakes with batten strip Corrugated radiator intake grilles See-through standard 48” radiator fan housings with fan blades visible inside Curved radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets Speed recorder mounted to first axle left front Reward facing handbrake chain mount for HTC trucks Short jacking pads (late) Spare knuckle holders on rear pilot face Rearward engineer’s side sidesill notch Tab-mount EFCO Frame-mounted steel bell Graham-White (Salem) brand 824-170 and 818-170 primary and secondary centrifugal air filters (accordion-style) 4,000-gallon fuel tank with dual fuel fillers, vertical gauge, round gauge in tank (right side only), vertical breather pipe and waste retention tank Factory-applied wire grab irons, windshield wipers, trainline hoses with silver gladhands, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible even under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 3/4” Recommended radius: 11”