Neuerscheinung! Auslieferung Februar 2027

• DCC vorbereitet
• mit Sound

All-new model Era: 2014 to present Series 7600 to 7799; built 01-09/07 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for capacitor box clearance, and right long rail with bolted head on 2nd lower stanchion Sand box clean out door with handle and rotating hinge Front nose headlight Front straight grab irons mounted directly to the nose Left nose door without window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof with UP-specific PTC antenna farm with JEM-manufactured cabinets Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Left side dynamic brake cab: late single blower dynamic brake package with dual stand-off exhaust, two small center grilles, and latched center door Right side dynamic brake cab: X panel door, small grille, door with grille, and X panel door Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Capacitor box on left side walkway Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders, dual bracket air plumbing, and smooth section in sideframe over center axle Square handbrake chain bracket Toilet drain with interior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

Produktgewicht inkl. Verpackung: 1,320 kg

Angaben zur Produktsicherheit:
Hersteller: Scale Trains, 4901 Old Tasso Road NE Cleveland, TN 37312, USA, www.scaletrains.com
Verantwortlicher Importeur: RD-Hobby Modellbahnen, Jaegersburger Str. 17,68649 Gross-Rohrheim, Deutschland, email@RD-Hobby.de