新商品! 到貨於 十一月 2024

• 與 DCC 解碼器
• 商品有聲音

On September 22nd, 1995, Santa Fe and Burlington Northern merged to become the Burlington Northern and Santa Fe Railway. The company’s name was later shortened to BNSF Railway. To celebrate their 25th Anniversary, BNSF added the heralds of eight (8) predecessor railroads to 10 ES44AC locomotives. ScaleTrains is excited to partner with BNSF and be the only N manufacturer to offer these commemorative locomotives. These specially decorated FVM GEVO locomotives are now available as DCC with sound and DCC ready versions.

Road Number Specific All-new model, Includes two unique tenders, 24-C-GTE Class insulated body, 24,000-gallon capacity, Welded seams, Intricate electrical and water plumbing, Factory-applied air tank, brake cylinder, and control valve, Brake beam, Handbrake housing with finely detailed wheel and chain, Commonwealth 3-axle trucks with SKF bearings 36” machined metal wheels, Directional front and rear LED lighting, 2-function DCC programmable decoder, Operate using DC and DCC, All Rivet Counter N Rolling Stock Feature Fully assembled, Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses, Body-mounted semi-scale Type E knuckle couplers, Weighted above Industry standards, Operates on Code 55 and 70 rail, Printing and lettering legible even under magnification, Color matched to Tru-Color paint colors whenever possible, Minimum radius: 9 ¾”

Road Number Specific All-new model, Includes two unique tenders, 24,000 gallon capacity ,Non-insulated #809 American flag printed on separate photo-etched metal placard, Roof equipment boxes and water plumbing details Different weld seam locations and riveted end access plates for each tender, Intricate electrical and water plumbing, Factory-applied air tank, brake cylinder, and control valve Brake beam Handbrake housing with finely detailed wheel and chain Commonwealth 3-axle trucks, 36” machined metal wheels, Directional front and rear LED lighting, 2-function DCC programmable decoder, Operate using DC and DCC All Rivet Counter N Rolling Stock Feature Fully assembled, Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses, Body-mounted semi-scale Type E knuckle couplers, Weighted above Industry standards, Operates on Code 55 and 70 rail, Printing and lettering legible even under magnification, Color matched to Tru-Color paint colors whenever possible, Minimum radius: 9 ¾”

Road Number Specific All-new model, 24-C-GTE Class insulated body, 24,000-gallon capacity, Welded seams, Intricate electrical and water plumbing, Factory-applied air tank, brake cylinder, and control valve, Brake beam, Handbrake housing with finely detailed wheel and chain, Commonwealth 3-axle trucks with SKF bearings, 36” machined metal wheels, Operating rear tender LED light, 2-function DCC programmable decoder, Operate using DC and DCC All Rivet Counter N Rolling Stock Feature Fully assembled, Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses, Body-mounted semi-scale Type E knuckle couplers, Weighted above Industry standards, Operates on Code 55 and 70 rail, Printing and lettering legible even under magnification, Color matched to Tru-Color paint colors whenever possible, Minimum radius: 9 ¾”

Era: late 1960s to 1980s SXT32897 features silver trucks SXT32898 features black trucks Fully assembled, Operating rear tender LED light, 2-function DCC programmable decoder, 24-C-GTE Class insulated body, 24,000-gallon capacity, Welded seams, Intricate electrical and water plumbing, Factory-applied air tank, brake cylinder, and control valve, Brake beam, Handbrake housing with finely detailed wheel and chain, Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses, Commonwealth 3-axle trucks with SKF bearings, 36” machined metal wheels, Body-mounted semi-scale Type E knuckle couplers, Weighted above Industry standards for reliable operation, Operates on Code 55 and 70 rail, Printing and lettering legible even under magnification, Packaging safely stores model Minimum radius: 9 ¾”

Era: late 1960s to 1980s SXT32897 features silver trucks SXT32898 features black trucks Fully assembled, Operating rear tender LED light, 2-function DCC programmable decoder, 24-C-GTE Class insulated body, 24,000-gallon capacity, Welded seams, Intricate electrical and water plumbing, Factory-applied air tank, brake cylinder, and control valve, Brake beam, Handbrake housing with finely detailed wheel and chain, Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses, Commonwealth 3-axle trucks with SKF bearings, 36” machined metal wheels, Body-mounted semi-scale Type E knuckle couplers, Weighted above Industry standards for reliable operation, Operates on Code 55 and 70 rail, Printing and lettering legible even under magnification, Packaging safely stores model Minimum radius: 9 ¾”

• 與 DCC 解碼器
• 商品有聲音

Road Number Specific ScaleTrains Era: mid to late 1960’s appearance UP Series 1 to 15, built 2/1959 3-unit set: “A”, “B”, and Fuel Tender Fully-assembled Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 11” Recommended radius: 19” “A” Control Unit Printed and LED lighted number boards Semi-scale Type E knuckle couplers With nose grab irons Detailed cab interior with control stand, floor, rear wall and seats Radiator mounted lost wax brass cast Leslie S-5T-R air horn mounted on clearance bracket Cab roof heater box Square base whip antenna Large see-through photo-etched metal side grilles H – H dynamic brake housing configuration With air intake scoops Modified radiator with all weather shutters Underbody frame rail As delivered 2,500 gallon diesel fuel tank Auxiliary reservoirs mounted to underside of fuel tank Two air tanks with separate plumbing Factory-applied ladders, wire grab irons, coupler cut levers, windshield wipers, mirrors, trainline hoses with silver glad hands, lifting lugs, exhaust stack, and bell Highly detailed trucks with separately applied brake cylinders, and air pipes; molded-on wheel slip indicators on left side frames and speed recorder on right side second axle Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pickup Directional LED headlight DCC & sound equipped locomotives feature: Operates on both DC and DCC layouts ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Prime mover sound Single cub-type speaker DC/DCC & sound ready locomotives feature: Operable using a DC power pack DCC-ready with 21-pin connector “B” Turbine Unit Operating LED back-up light Dual Farr Dynavane inertial type air intake housings Single H dynamic brake housing Offset air intake scoops Blanked door panels and forward ventilation louvers Factory-applied ladders, wire grab irons, coupler cut levers, and trainline hoses with silver glad hands With rear MU connections Underbody frame rail Highly detailed trucks with separately applied brake cylinders, and air pipes; molded-on wheel slip indicators on left side frames Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pickup DCC & sound equipped locomotives feature: Operates on both DC and DCC layouts ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Turbine sound Single cub-type speaker DC/DCC & sound ready locomotives feature: Operable using a DC power pack DCC-ready with 21-pin connector 24C Fuel Tender 24,000-gallon capacity Welded seams Insulated body Commonwealth 6-axle trucks Factory-applied air tank, brake cylinder, and control valve Factory-applied multiple unit (MU) hoses with silver gladhands Photo-etched metal tender deck walkway Operating LED rear tender light *Some sound and lighting functions are only operable using DCC

• 與 DCC 解碼器
• 商品有聲音

Era: 2016-Present Operating LED front deck-mounted LED ditch lights Printed and LED lighted number boards Body mounted semi-scale Type E knuckle couplers; Micro-Trains® compatible Coupler box accepts Micro-Trains 1015/1016 couplers without modification, Walkway with front anticlimber, GE “nub” pattern walkway tread, Sand box clean out door with knuckle buster latch, Narrow profile end handrails, Front nose headlight, Nose door without window, Detailed cab interior with floor, rear wall, seats, and control stand, Tinted cab side windows, Cab roof JEM Communications PTC antenna farm with single medium and two small Sinclair antennas on front cabinet and two medium and one small Sinclair antenna on rear cabinet, Left side dynamic brake cab: tri blower dynamic brake with flush exhaust, Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille, Current production engine cab (long hood) with angled exhaust compartment roofline, Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof , Accurately profiled frame with separately applied plumbing and cabling, GE Hi-Ad trucks with separately applied brake cylinders and air plumbing , 5,300 gallon fuel tank with external waste retention tank, Dual fuel fills per side with rear fill “blanked”, Factory-applied wire grab irons, snowplow, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, MU cable, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank mounted electronic bell, brake wheel, exhaust stack, and more Motor with 5-pole skew wound armature, Dual flywheels, All-wheel drive, All-wheel electrical pick-up, Directional LED headlights, Printing and lettering legible under magnification, Operates on Code 55 and 80 rail, Durable packaging safely stores model, Minimum Radius: 9 ¾”,Recommended Radius: 11” DCC & sound equipped locomotives also feature ESU-LokSound 5 Next18 Micro DCC and sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

• 與 DCC 解碼器
• 商品有聲音

Road number 9617 (ex-SP 8153) Era: 2000-2008 Patched former Southern Pacific unit Unique destressed paint and lettering Last patched SP C44-9W before repainting Yellow sill stripes Fully-assembled Multiple road numbers Operating LED-illuminated front deck-mounted ditch lights* Printed and LED-illuminated number boards* Factory-applied detail parts: wire grab irons, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, MU cable, uncoupling levers, windshield wipers, mirrors, sunshades, brake wheel, and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door without window Front LED-illuminated headlight with lenses on low short hood GE safety cab with three (3) side windows Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communications antenna, small Sinclair “ice skate” End of Train (EOT) telemetry antenna, “wedge” antenna, and GPS dome Motive Equipment Inc. (MEI) ME7000 HVAC Unit Early (curved) engine cab profile Early flanged exhaust stack housing “Bathtub” exhaust silencer Early radiator door grille pattern (all the same height) Low-mounted rear sandfiller Early lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Separate air tanks with upper mounting brackets Fuel tank mounted steel bell 5,000 gallon fuel tank Dual fuel fills per side with rear fill “blanked” Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature ESU-LokSound 5 Micro DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

• 與 DCC 解碼器
• 商品有聲音

Road number 9647 (ex-SP 8183) Era: 2000-2014 Patched former Southern Pacific unit Unique destressed paint and lettering Last patched SP C44-9W before repainting Yellow sill stripes Fully-assembled Multiple road numbers Operating LED-illuminated front deck-mounted ditch lights* Printed and LED-illuminated number boards* Factory-applied detail parts: wire grab irons, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, MU cable, uncoupling levers, windshield wipers, mirrors, sunshades, brake wheel, and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door without window Front LED-illuminated headlight with lenses on low short hood GE safety cab with three (3) side windows Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communications antenna, small Sinclair “ice skate” End of Train (EOT) telemetry antenna, “wedge” antenna, and GPS dome Motive Equipment Inc. (MEI) ME7000 HVAC Unit Early (curved) engine cab profile Early flanged exhaust stack housing “Bathtub” exhaust silencer Early radiator door grille pattern (all the same height) Low-mounted rear sandfiller Early lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Separate air tanks with upper mounting brackets Fuel tank mounted steel bell 5,000 gallon fuel tank Dual fuel fills per side with rear fill “blanked” Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature ESU-LokSound 5 Micro DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

• 與 DCC 解碼器
• 商品有聲音

Road Number Specific ScaleTrains All-new model Era: As delivered, series 8077-8099, built 1979 Phase IId2 Road numbers 8077, 8080, 8094 and 8099 UP “Fast Forties” Geared to run with DDA40Xs Fully-assembled Multiple road numbers Class lights (non operating) Saturn 6552 Strobe Light (non operating) Printed and LED-illumintaed number boards* Front tall pilot plow with high trainline hose cut out, multiple unit (MU) hose doors and grab irons 3-hose multiple unit (MU) hose clusters with silver gladhands Body mounted knuckle couplers; Micro-Trains® compatible Coupler box accepts Micro-Trains 1015/1016 couplers without modification Straight uncoupling levers with loop handles front and rear and two inner and two outer mounting brackets Notched pilot faces without lifting holes or slots Deck mounted multiple unit (MU) receptacle "Tall" stepwells Front and rear late small deck extension Handrail set with inward facing end rail mounting brackets and chain; break-away stanchions on both ends Late “fixed” drop steps Scale sectioned treadplate detail on walkways Rectangle walkway lights mounted between sandbox clean out doors (non-operating) 88" low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges Front standard EMD LED-illuminated headlight in number board housing Dash two cab with welded side window panels Detailed cab interior with floor, rear wall, seats, and standard AAR control stand Rear cab side vent on left side Tall clear wind wings mounted fore and aft of cab side window on right and left side of cab Standard EMD sunshades and short sunshade tracks Lost wax brass cast Leslie RS-3-LR horn mounted on number board housing Motorola ASP-16 “Firecracker” antenna mounted on number board housing Early electrical cabinet "zig-zag" seam, further from rear of cab Late welded ECAFB Intermediate inertial air intake grills with top drip rail Standard turbo exhaust stack Accurately profiled Extended-range dynamic brakes without batten strip Corrugated radiator intake grilles See-through standard 48” radiator fan housings with fan blades visible inside Curved radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets Speed recorder mounted to first axle left front Rearward facing handbrake chain mount for HTC trucks Short jacking pads (late) Spare knuckle holders on fuel tank near fuel filler Forward engineer’s side sidesill notch Sill-mount EFCO Frame-mounted steel bell Salem air filter (accordion style) 4,000-gallon fuel tank with fuel fillers, vertical gauge and round gauge on stand Factory-applied wire grab irons, windshield wipers, trainline hoses with silver gladhands, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible even under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 3/4” Recommended radius: 11” DCC & sound equipped locomotives also feature ESU LokSound 5 DCC & Sound decoder with “Full Throttle” One (1) cube-type speaker EMD 16 Cylinder 645E3 prime mover Operates on both DC and DCC layouts

• 與 DCC 解碼器
• 商品有聲音

Road Number Specific ScaleTrains All-new model Era: 2007+ Series 100 to 199; built 4-5/95 Road number 177 Yellow swapped HVAC unit Yellow sill stripes Gray swapped air tanks Road number 199 Gray swapped HVAC unit Yellow sill stripes Gray swapped air tanks Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights LED-illuminated high-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door with window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door without latch GE safety cab with three (3) side windows Right side cab under floor access doors: four screened louver sections per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communication antenna; small Sinclair “ice skate” End of Train (EOT) telemetry antenna Early: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels Continuous reinforcement rib under dynamic brake intake grilles Standard dynamic brake exhaust (2-port) Forward right-side air intake grille Left side auxiliary cab: three (3) tall doors with latches on the #2 Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Early curved engine cab profile Lost-wax brass cast Nathan AirChime P3 (P24R1 configuration) horn mounted on engine cab “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, short grilles Low-mounted rear sandfiller Early “box” lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Prime) 975-075 air filters Graham-White 975-100 “twin tower” air filter dryer 5,000 gallon fuel tank Single fuel fills per side Round and vertical analog fuel gauges; digital fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket SP-style spare coupler knuckle boxes on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 Nano DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts DC/DCC ready locomotives also feature: Operates on DC layouts DCC ready with Nano connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate

• 與 DCC 解碼器
• 商品有聲音

Road Number Specific ScaleTrains All-new model Era: 1997 to Early-2000s Series 7143 to 7244, built 10/97 Road numbers 7143, 7150 and 7157 Red sill stripe Fully-assembled LED-illuminated front deck-mounted ditch lights LED-illuminated high-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door without window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door without latch GE safety cab with three (3) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Antennas Octagonal antenna dome with small square dome Early: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels Continuous reinforcement rib under dynamic brake intake grilles Standard dynamic brake exhaust (2-port) Forward right-side air intake grille Left side auxiliary cab: three (3) medium doors with latches on the #2 door Capacitor box on left side walkway Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Late angled engine cab profile with tri-fold power assembly access doors Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sandfiller Early “box” lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Salem) 824-100 centrifugal air filters No air dryer 5,000 gallon fuel tank Single fuel fills per side Round and vertical analog fuel gauges; digital fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 Nano DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts DC/DCC ready locomotives also feature: Operates on DC layouts DCC ready with Nano connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate

• 與 DCC 解碼器
• 商品有聲音

Road Number Specific ScaleTrains All-new model Era: 1975 to Mid 1980s Series 5356 to 5373; built Jul-Aug 1975 Road numbers 5356, 5369 and 5372 Operating LED Mars SBW-2-301 signal light in low short hood* “Straddle” type re-rail frogs Front EMD-style low pilot plow with MU hose doors and grab irons 81” low short hood with ratchet handbrake and angled chain guard Bolted battery box doors with narrow louvers Early cab sub-base doors with early hinges Rear cab side vent on right side Stand-off ECAFB (early) Accurately-profiled extended-range dynamic brakes with batten strip Handrail set with inward facing end rail mounting brackets, rear anticlimber and chain Notched pilot faces with low mounted angled lifting slots Deck-mounted MU receptacle Tall jacking pads with holes (early) ACI labels mounted on plates attached to handrail stanchions Unnumbered Operating LED Mars SBW-2-301 signal light in low short hood* “Straddle” type re-rail frogs Front EMD-style low pilot plow with MU hose doors and grab irons 81” low short hood with ratchet handbrake and angled chain guard Bolted battery box doors with narrow louvers Early cab sub-base doors with early hinges Rear cab side vent on right side Stand-off ECAFB (early) Accurately-profiled extended-range dynamic brakes with batten strip Handrail set with inward facing end rail mounting brackets, rear anticlimber and chain Notched pilot faces with low mounted angled lifting slots Deck-mounted MU receptacle Tall jacking pads with holes (early) ACI labels mounted on plates attached to handrail stanchions Fully-assembled Multiple road numbers Class lights (non-operating) Printed and LED-illuminated number boards* Front and rear 3-hose MU hose clusters with silver gladhands Body mounted knuckle couplers; Micro-Trains® compatible Coupler box accepts Micro-Trains 1015/1016 couplers without modification Front late small deck extension Late front drop step (“fixed”) Scale sectioned treadplate detail on the walkways Front "tall" stepwells and rear “ladder” steps Standard EMD headlight in numberboard housing Dash-2 cab with bolted side window panels and D&RGW blue flag bracket Original cab front door Standard Mirror mounted fore of cab side windows, both sides Standard EMD sunshades and long sunshade tracks Lost-wax brass Nathan M3R1 (“M-3”) three-chime horn, center rear of number board housing Large Sinclair Excalibur “ice skate” antenna (communications) mounted on cab roof Early electrical cabinet "zig-zag" seam, further from rear of cab Intermediate inertial air intake grills with top drip rail Standard turbo exhaust stack Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Accurate hood door and long hood detail See-through standard 48” dynamic brake fan housings with fan blades visible inside See-through radiator intake compartment Etched-metal radiator exhaust grills with radiator shutters visible underneath Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets (outboard only Speed recorder third axle, right side Sill-mounted EFCO Frame-mounted bell Graham-White (Salem) brand 824-170 and 818-170 primary and secondary centrifugal air filters (accordion-style) Standard air tanks 4,000 gallon fuel tank with dual fuel fillers, vertical gauge, round gauge in tank and vertical breather pipe Factory-applied wire grab irons, windshield wipers, trainline hoses with silver gladhands, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible even under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 3/4” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” One (1) cube-type speaker EMD 16 Cylinder 645E3 prime mover Operates on both DC and DCC layouts

• 與 DCC 解碼器
• 商品有聲音

Road Number Specific ScaleTrains All-new model Era: Mid 1990s – Early 2000s UP Series mixed, built 2-3/78 (ex-SP Series 8357 - 837) Road numbers 4425 (ex-SP 8361) and 4429 (ex-SP 8371) Data label and lettering placement variations Plated over front and blanked rear red LED Pyle-National 17540 “UDE” Gyralites Blanked class lights with bolted plates front and rear Round walkway lights (non-operating) 123” “snoot” low short hood with wheel handbrake and round vent on top SP “split” cab sub-base doors with lift-off hinges Dash-2 cab with bolted side window panels, SP/SSW blue flag bracket, and modified “L” front window “Whip” radio antenna mounted on ground plane over dust bin and dual Locotrol antenna ground planes on cab roof with conduits Early electrical cabinet “zig-zag” seam, further from rear of cab Intermediate inertial air intake grills with top drip rail Extended-range dynamic brakes Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets; angled rear uncoupling lever with four mounting brackets Fully-assembled Multiple road numbers Operating LED-illuminated front deck-mounted ditch lights* Printed and LED-illuminated number boards* Vapor Corp. cab roof HVAC Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Body mounted knuckle couplers; Micro-Trains® compatible Coupler box accepts Micro-Trains 1015/1016 couplers without modification Front pilot anticlimber Scale sectioned treadplate detail on the walkways Front "tall" stepwells and rear “ladder” steps SP nose headlight package Cab front door with additional door lock at top of door Tall clear wind wings with angled top corners mounted fore and aft of cab side window on both sides of cab Rear cab side vent on left side Standard EMD sunshades and long sunshade tracks Lost-wax brass Leslie RS-3L-R three-chime horn on clearance bracket, relocated to long hood roof Welded ECAFB (late) Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Accurate hood door and long hood detail See-through standard 48” dynamic brake fan housings with fan blades visible inside See-through radiator intake compartment Etched-metal radiator exhaust grills with radiator shutters visible underneath Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets (outboard only Speed recorder first axle, left side Four-hole SP jacking pads Spare knuckle holders on fuel tank near fuel filler Sill-mounted EFCO Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, windshield wipers, trainline hoses with silver gladhands, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible even under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 3/4” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” One (1) cube-type speaker EMD 16 Cylinder 645E3 prime mover Operates on both DC and DCC layouts

• 與DCC的使用（DCC接口）

Road Number Specific ScaleTrains All-new model Era: Mid 1990s – Early 2000s UP Series mixed, built 2-3/78 (ex-SP Series 8357 - 837) Road numbers 4425 (ex-SP 8361) and 4429 (ex-SP 8371) Data label and lettering placement variations Plated over front and blanked rear red LED Pyle-National 17540 “UDE” Gyralites Blanked class lights with bolted plates front and rear Round walkway lights (non-operating) 123” “snoot” low short hood with wheel handbrake and round vent on top SP “split” cab sub-base doors with lift-off hinges Dash-2 cab with bolted side window panels, SP/SSW blue flag bracket, and modified “L” front window “Whip” radio antenna mounted on ground plane over dust bin and dual Locotrol antenna ground planes on cab roof with conduits Early electrical cabinet “zig-zag” seam, further from rear of cab Intermediate inertial air intake grills with top drip rail Extended-range dynamic brakes Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets; angled rear uncoupling lever with four mounting brackets Fully-assembled Multiple road numbers Operating LED-illuminated front deck-mounted ditch lights* Printed and LED-illuminated number boards* Vapor Corp. cab roof HVAC Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Body mounted knuckle couplers; Micro-Trains® compatible Coupler box accepts Micro-Trains 1015/1016 couplers without modification Front pilot anticlimber Scale sectioned treadplate detail on the walkways Front "tall" stepwells and rear “ladder” steps SP nose headlight package Cab front door with additional door lock at top of door Tall clear wind wings with angled top corners mounted fore and aft of cab side window on both sides of cab Rear cab side vent on left side Standard EMD sunshades and long sunshade tracks Lost-wax brass Leslie RS-3L-R three-chime horn on clearance bracket, relocated to long hood roof Welded ECAFB (late) Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Accurate hood door and long hood detail See-through standard 48” dynamic brake fan housings with fan blades visible inside See-through radiator intake compartment Etched-metal radiator exhaust grills with radiator shutters visible underneath Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets (outboard only Speed recorder first axle, left side Four-hole SP jacking pads Spare knuckle holders on fuel tank near fuel filler Sill-mounted EFCO Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, windshield wipers, trainline hoses with silver gladhands, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible even under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 3/4” Recommended radius: 11” DC/DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with E24 connector

新商品! 到貨於 五月 2025

• 與 DCC 解碼器
• 商品有聲音

New roadname Era: 11/1994 to approximately 2000 Series 8801 to 8835; built 11-12/1994 Fully-assembled Multiple road numbers LED-illuminated front pilot face-mounted ditch lights LED-illuminated low-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door with window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door with latch GE safety cab with three (3) side windows Right side cab under floor access doors: four screened louver sections per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communication antenna; small Sinclair “ice skate” End of Train (EOT) telemetry antenna; and small “cone” antenna Early: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels Alternating reinforcement ribs under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Forward right-side air intake grille Left side auxiliary cab: three (3) medium doors with latches on the #2 door Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Early curved engine cab profile Lost-wax brass cast Nathan AirChime K5HAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sandfiller Early “box” lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Salem) 824-100 centrifugal air filters No air dryer 5,000 gallon fuel tank Dual fuel fills per side Round and vertical analog fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket CNW-style spare coupler knuckle holders on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 Nano DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

新商品! 到貨於 五月 2025

• 與DCC的使用（DCC接口）

New roadname Era: 11/1994 to approximately 2000 Series 8801 to 8835; built 11-12/1994 Fully-assembled Multiple road numbers LED-illuminated front pilot face-mounted ditch lights LED-illuminated low-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door with window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door with latch GE safety cab with three (3) side windows Right side cab under floor access doors: four screened louver sections per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communication antenna; small Sinclair “ice skate” End of Train (EOT) telemetry antenna; and small “cone” antenna Early: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels Alternating reinforcement ribs under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Forward right-side air intake grille Left side auxiliary cab: three (3) medium doors with latches on the #2 door Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Early curved engine cab profile Lost-wax brass cast Nathan AirChime K5HAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sandfiller Early “box” lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Salem) 824-100 centrifugal air filters No air dryer 5,000 gallon fuel tank Dual fuel fills per side Round and vertical analog fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket CNW-style spare coupler knuckle holders on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DC/DCC ready locomotives also feature: Operates on DC layouts DCC ready with Nano connector

新商品! 到貨於 五月 2025

• 與 DCC 解碼器
• 商品有聲音

New roadname Era: 1999 to late 2005 Series 2000 to 2049; built 11-12/1999 Road number 2000 Special NAFTA paint scheme Fully-assembled LED-illuminated front and rear deck-mounted ditch lights** LED-illuminated high-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door with window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door without latch GE safety cab with three (3) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Octagonal antenna dome; Large Sinclair “ice skate” communication antenna Intermediate: four (4) square bolted panels and three (3) tall horizontal X-panels Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: three (3) short doors with latches on the #2 door; auxiliary cab filter box door Capacitor box on left side walkway Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Late angled engine cab profile with raised “dot” treadplate on centerline and tri-fold power assembly access doors Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Electric handbrake panel without brake wheel; electric brake actuator on right front truck sideframe Left rear hood door grille arrangement: tall, short, tall grilles High-mounted rear sandfiller Early “box” lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling Early GE Steerable Trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Prime) 975-075 air filters Graham-White 994-500 series air dryer 5,000 gallon fuel tank Single fuel fills per side Vertical analog fuel gauges; “blanked” round gauges; and digital fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Paint colors match Tru-Color Paint color: TCP-302 KCS Gray Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 Nano DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

新商品! 到貨於 五月 2025

• 與DCC的使用（DCC接口）

New roadname Era: 1999 to late 2005 Series 2000 to 2049; built 11-12/1999 Road number 2000 Special NAFTA paint scheme Fully-assembled LED-illuminated front and rear deck-mounted ditch lights** LED-illuminated high-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door with window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door without latch GE safety cab with three (3) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Octagonal antenna dome; Large Sinclair “ice skate” communication antenna Intermediate: four (4) square bolted panels and three (3) tall horizontal X-panels Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: three (3) short doors with latches on the #2 door; auxiliary cab filter box door Capacitor box on left side walkway Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Late angled engine cab profile with raised “dot” treadplate on centerline and tri-fold power assembly access doors Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Electric handbrake panel without brake wheel; electric brake actuator on right front truck sideframe Left rear hood door grille arrangement: tall, short, tall grilles High-mounted rear sandfiller Early “box” lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling Early GE Steerable Trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Prime) 975-075 air filters Graham-White 994-500 series air dryer 5,000 gallon fuel tank Single fuel fills per side Vertical analog fuel gauges; “blanked” round gauges; and digital fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Paint colors match Tru-Color Paint color: TCP-302 KCS Gray Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DC/DCC ready locomotives also feature: Operates on DC layouts DCC ready with Nano connector