新商品! 到貨於 九月 2026

• 與 DCC 解碼器
• 商品有聲音

Road Number Specific ScaleTrains New road numbers Era: mid 1980s to early 1990s Series 8090 to 8181; 5-7/1980 Road numbers 8099, 8103, and 8121 LED-illuminated tricolor front and rear flush-mounted class lights with raised gaskets*** Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) LED-Illuminated round walkway lights mounted between front sanding valve doors; rectangular walkway lights mounted between rear sanding valve doors and round walkway light, aft of raised walkway duct* Directional LED-illuminated headlights LED-illuminated Prime PM-8911 Stratolite beacon* Printed number boards with separately controlled backlit LED-illumination* Front EMD-style low pilot plow with multiple unit (MU) hose doors and grab irons 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E bottom-shelf knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers with loop handles and four inner mounting brackets Notched pilot faces with high angled lifting slots Pilot face mounted multiple unit (MU) receptacles Dummy multiple unit (MU) receptacles mounted to pilot face "Tall" stepwells with see-through steps Narrow “blunt” front anticlimber Handrail set with anticlimber front; inward facing rear end rail mounting brackets and chain Rear late “fixed” drop step Scale sectioned treadplate detail on walkways 88" low short hood with ratchet handbrake and straight handbrake chain guard and round vent on lower right side BN-style latched battery box doors with narrow louvers and lift-off hinges Late cab sub-base doors with lift-off hinges Standard EMD headlight in number board housing Dash-2 cab with welded side window panels Rear cab side vent on left side Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Sliding cab side windows Tall clear wind wings with mirror at bottom mounted fore of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Leslie RS-3K-R horn mounted on the cab Motorola ASP-16 “firecracker” antenna mounted on the cab and small can EOT antenna added on front left numberboard housing Accurate hood door and long hood detail Late electrical cabinet "zig-zag" seam, closer to the rear of the cab Late welded ECAFB Late inertial air intake grilles with top and bottom drip rail “Post-1980” exhaust silencer Accurately-profiled "post-1980" standard-range dynamic brake housing See-through dynamic brake intakes with resistor grid detail Corrugated radiator intake grilles See-through 48” single-speed radiator "Q-Fans” with fan blades visible inside Angled radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets, and D-77 traction motor and air duct details Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front Rearward-facing handbrake chain mount for HTC trucks Short jacking pads (late) Aft engineer’s side sidesill notch Tab-mount EFCO Frame-mounted steel bell Graham-White (Salem) brand 824-170 and 818-170 primary and secondary centrifugal air filters (accordion-style) 4,000-gallon fuel tank with dual fuel fillers, vertical gauge, round gauge in tank (right side only), and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged EMD 16 Cylinder 645E3 prime mover ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. ** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate. *** Class lights illuminate in white color only in DC operation. Access and change the colors with an appropriately programmed ESU decoder while operating using DCC. **** “PowerPack” feature is only compatible with appropriately programmed ESU decoders operating on a DCC layout.

商品重量: 1,320 kg

Angaben zur Produktsicherheit:
Hersteller: Scale Trains, 4901 Old Tasso Road NE Cleveland, TN 37312, USA, www.scaletrains.com
Verantwortlicher Importeur: RD-Hobby Modellbahnen, Jaegersburger Str. 17,68649 Gross-Rohrheim, Deutschland, email@RD-Hobby.de