3 Container mit folgenden Nummern: 211237, 211276, 211277

All-new model Era: 1997 to 2005 Series 249135 to 249254, built 12/97 Road numbers 249180, 249186, 249198, 249216, 249223 and 249251 As delivered paint No conspicuity striping 2 x Version 4 Hood: Corner reinforcement, long side handrail, hood stacking brackets with solid inner guides Fully-assembled Multiple road numbers Body with dual trough design and center divider, sixteen walkway side supports and simulated wood trough interior. Designed for the use of two hoods although, depending on the type of steel, the car can be run without hoods as well. Body has four wireform side grab irons and four wireform end grab irons Each hood is constructed with up to 27 individual parts including 12 photo etched handrail stanchions, six wireform handrails, four wireform grab irons, two hood stacking brackets, two hood top braces, and lifting bail Handbrake housing with finely detailed wheel and chain See-through photo-etched metal walkway Simulated wood interior floor using a hand applied wash Four (4) positionable load dividers Four (4) large unwrapped coil steel loads with metal weight inside each Factory-applied end handrails, hood guides, stanchions, load divider tracks, metal grab irons, coupler cut levers, and trainline hoses with silver gladhands Complete underbody brake system with over 20 separately applied parts including air reservoir, control valve, and retainer valve plus wireform plumbing and trainline pipe with brackets Durable body-mounted die-cast metal semi-scale SE Type lower shelf knuckle couplers Highly-detailed Barber S-2 100-ton trucks with finely rendered raised foundry data, rotating bearing caps, side bearing detail, and separate brake beam detail Printed reporting mark and road number on all four trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread Operates on Code 70, 83 and 100 rail Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-172 Weathered Concrete Weighted to Industry standards for reliable operation Packaging safely stores model Recommended radius 18”

• DCC vorbereitet (Schnittstelle vorhanden)

New roadname Era: mid 1970s to late 1980s Series 2200 to 2249, 2198-2199; ex-PRR/PC 2200 to 2251, built 2-5/63 Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Operating LED-illuminated front and rear red marker lights with lenses** Cab and rear number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers with retrofitted switchman grab handles As-delivered pilot faces with uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle Dummy multiple unit (MU) receptacle mounted to end handrail stanchions “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab No sunshades or sunshade tracks Lost-wax brass cast Leslie SU-3L-R horn mounted on right side cab eave Large Sinclair Excalibur “ice skate” antenna (communications) mounted on the cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Late See-through dynamic brake intake grills with horizontal wires through vertical vanes 6-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell Prime air filter (can style) 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

• mit DCC Motordekoder
• mit Sound

New roadname Era: 1963 to early 1970s Series 1246 to 1284; built 1-6:1963 Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Operating LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** Cab and rear number boards Front and rear multiple unit (MU) hose catch boxes and footboards 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab side vent on left side Sliding cab side windows Small mirrors mounted fore of cab side windows on both sides of cab No sunshades or sunshade tracks Lost-wax brass cast Leslie Supertyfon S-2M over the cab engineers side and single chime S-25 over the cab conductors side Bendix-King 'can' style antenna mounted on cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Early See-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with square and sloped bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

• DCC vorbereitet (Schnittstelle vorhanden)

Small data and label variations Operating LED front and rear tricolor flush-mounted with raised gasket class lights** Black cab armrest Raised slug electrical conduit cover on rear walkway deck with slug electrical bus connections on end Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Printed and LED lighted number boards* Extended walkway duct (SP toolbox) on left side Front and rear full width multiple unit (MU) hose catch tray 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Straight uncoupling levers with loop handles front and rear and four inner and two outer mounting brackets Notched pilot faces without lifting holes or slots Deck mounted multiple unit (MU) receptacle "Tall" stepwells with see-through steps Front and rear early small deck extension Handrail set with inward facing end rail mounting brackets and chain Standard front and rear drop steps Scale sectioned treadplate detail on walkways Rectangle walkway lights mounted between sandbox clean out doors (non-operating) 81” low short hood with ratchet handbrake with angled chain guard, “inverted” louvers on the left side, and round vent on top Bolted battery box doors with wide louvers SP “split” cab sub-base doors with stiffener rib and early hinges Standard EMD headlight in short hood Dash 2 cab with 11-bolt (top and bottom) window panels, modified (“used-to-be”) SP L-window, large armrests, and “inverted” hot water heater louvers on right front Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Vent on rear cab door, cab front above engineer’s window, and large square vent on cab roof on fireman’s side Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades and long sunshade tracks Lost wax brass cast Nathan P-3 (P24R1 configuration) horn on number board housing “Whip” antenna mounted to center of cab roof Accurate hood door and long hood detail Early electrical cabinet "zig-zag" seam, further from rear of cab Early “stand-off” ECAFB Intermediate inertial air intake grills with top drip rail Dual tall exhaust stacks Accurately profiled extended-range dynamic brakes without batten strip See-through dynamic brake intakes with resistor grid detail Square PAF (Paper Air Filter) housing “Chicken-wire” radiator intake grilles See-through standard 48” radiator fan housings with fan blades visible inside Curved radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets, and D-77 traction motor and air duct details, triple clasp brake shoes, and third brake cylinder Dimensionally accurate truck centers Speed recorder mounted to first axle left front Rearward facing handbrake chain mount for HTC trucks Tall jacking pads with holes (early) Aft engineer’s side sidesill notch Tab-mount EFCO Tripod-mount bell with air line on cab roof Salem air filter (accordion style) 4,000-gallon fuel tank with fuel fillers and dual vertical gauges and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

• DCC vorbereitet (Schnittstelle vorhanden)

All-new model Era: 1995 to Late-90s Series 100 to 199; built 4-5/95 Road numbers 100 and 142 Left side auxiliary cab: three (3) tall doors with latches on the #2 No capacitor box on left side walkway Single large Sinclair “ice skate” communication antenna, and small Sinclair “ice skate” End of Train (EOT) telemetry antenna Late Hi-Ad trucks with cantilever struts on all four sideframes Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) Operating LED-illuminated front, rear, and side walkway lights* Operating LED-illuminated front deck-mounted alternating ditch lights** Printed high-mount cab number boards with separately controlled backlit LED-illumination* Tall snowplow with open doors and two (2) grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Dual dummy and single live pilot face MU connections Front nose headlight Nose door with window Two-piece nose top grab irons Battery cabinet access door without latch GE safety cab with three (3) side windows Right side cab under floor access doors: four screened louver sections per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Early inverter cabinet: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels Alternating reinforcement ribs under dynamic brake intake grilles Standard dynamic brake exhaust (2-port) Forward right-side air intake grille Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Early curved engine cab profile Lost-wax brass cast Nathan AirChime P3 (P24R1 configuration) horn mounted on engine cab Early flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, short grilles Tall, latched access door on long hood end Low-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Rotating axle bearing caps No speed recorder Dual Graham-White (Prime) 975-075 air filters Graham-White 975-100 “twin tower” air filter dryer 5,000-gallon fuel tank with vertical weld seams Single fuel fills per side Round and vertical analog fuel gauges; digital fuel gauges Fuel tank mounted steel bell Separate air tanks with upper mounting brackets Early square handbrake chain bracket SP-style spare coupler knuckle boxes on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22”

• DCC vorbereitet (Schnittstelle vorhanden)

Era: 1997 to Early-2000s Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front, rear, and side walkway lights* Operating LED-illuminated front pilot face mounted ditch lights** Printed low-mount cab number boards with separately controlled backlit LED-illumination*, Tall snowplow with open doors and two (2) grab irons, Semi-scale coupler buffer equipped with durable metal semi-scale Type E lower-shel knuckle couplers, 5-step stepwells with see-through steps, Walkway with front anticlimber, GE “nub” pattern walkway tread, Narrow profile end handrails, Single dummy and single live pilot face MU connections, Front nose headlight, Two-piece nose top grab irons, Battery cabinet access door without latch, GE safety cab with three (3) side windows, Right side cab under floor access doors: four screened louver sections per door, Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit, Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls, Tinted cab side windows, Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side, Early inverter cabinet: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels, Continuous reinforcement rib under dynamic brake intake grilles, Standard dynamic brake exhaust (2-port), Forward right-side air intake grille, Left side auxiliary cab: three (3) medium doors with latches on the #2 door, Capacitor box on left side walkway, Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors, Late angled engine cab profile with tri-fold power assembly access doors, Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab, Late non-flanged exhaust stack housing, “Bathtub” exhaust silencer, 26 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment, Late radiator door grilles in alternating heights, Standard brake wheel, Left rear hood door grille arrangement: tall, short, tall grilles, Low-mounted rear sand fill, Early “box” lifting lugs on ends of radiator wings, Accurately profiled frame with separately-applied plumbing and traction motor cabling, Late Hi-Ad trucks with cantilever struts on right front and left rear sideframes, Rotating axle bearing caps, No speed recorder, Dual Graham-White (Salem) 824-100 centrifugal air filters, No air dryer, 5,000-gallon fuel tank with vertical weld seams, Single fuel fills per side, Round and vertical analog fuel gauges; digital fuel gauges, Fuel tank mounted steel bell, Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover,Early square handbrake chain bracket, Spare coupler knuckle holders on rear pilot face, Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature, Dual flywheels, All-wheel drive, All-wheel electrical pick-up, Directional LED headlights, Printing and lettering legible under magnification, Operates on Code 70, 83, and 100 rail, Minimum Radius: 18”, Recommended Radius: 22” Operate on DC layouts DCC ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate *** Compatible with appropriately programmed ESU decoders while operating using DCC

• mit DCC Motordekoder

Metallradsätze, sehr detailliert mit vielen separat angebrachten Details Road Number Specific All-new model Fully assembled 24-C-GTE Class insulated body 24,000-gallon capacity Welded seams Intricate electrical and water plumbing Factory-applied air tank, brake cylinder, and control valve Brake beam Handbrake housing with finely detailed wheel and chain Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses Durable body-mounted die-cast metal semi-scale Type E knuckle couplers Commonwealth 3-axle trucks with SKF bearings 36” machined metal wheels Accurately profiled .110" wide wheel tread Directional front and rear LED lighting 2-function DCC programmable decoder Operate using DC and DCC Operates on Code 70, 83 and 100 rail Truck safety chains available separately (SXT80111) – requires 22” minimum radius curve Printing and lettering legible even under magnification Color matched to Tru-Color paint Weighted above Industry standards Packaging safely stores model Minimum radius: 18”

538,00 € pro 1000g

Road Number Specific ScaleTrains Fully assembled "Joe Jordan" Two (2) roof equipment boxes Water plumbing details. Unique weld seam locations Riveted end access plates Commonwealth 3-axle trucks with rotating bearing caps 24,000-gallon capacity Non-insulated Intricate electrical and water plumbing Handbrake housing with finely detailed wheel and chain Factory-applied air tank, brake cylinder, and control valve Brake beam Underbody brake details and plumbing Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses Durable body-mounted metal semi-scale Type E knuckle couplers 36” machined metal wheels Accurately profiled .110" wide wheel tread Directional front and rear LED lighting 2-function DCC programmable decoder Operate using DC and DCC Operates on Code 70, 83 and 100 rail Printing and lettering legible even under magnification Weighted above Industry standards Packaging safely stores model Truck safety chains available separately (SXT80111) – requires 22” minimum radius curve Minimum radius: 18”

• mit DCC Motordekoder
• mit Sound

Road Number Specific ScaleTrains All-new model Era: 1975 to Mid 1980s Series 5356 to 5373; built Jul-Aug 1975 Road numbers 5356, 5369 and 5372 Operating LED Mars SBW-2-301 signal light in low short hood* “Straddle” type re-rail frogs Front EMD-style low pilot plow with MU hose doors and grab irons 81” low short hood with ratchet handbrake and angled chain guard Bolted battery box doors with narrow louvers Early cab sub-base doors with early hinges Rear cab side vent on right side Stand-off ECAFB (early) Accurately-profiled extended-range dynamic brakes with batten strip Handrail set with inward facing end rail mounting brackets, rear anticlimber and chain Notched pilot faces with low mounted angled lifting slots Deck-mounted MU receptacle Tall jacking pads with holes (early) ACI labels mounted on plates attached to handrail stanchions Unnumbered Operating LED Mars SBW-2-301 signal light in low short hood* “Straddle” type re-rail frogs Front EMD-style low pilot plow with MU hose doors and grab irons 81” low short hood with ratchet handbrake and angled chain guard Bolted battery box doors with narrow louvers Early cab sub-base doors with early hinges Rear cab side vent on right side Stand-off ECAFB (early) Accurately-profiled extended-range dynamic brakes with batten strip Handrail set with inward facing end rail mounting brackets, rear anticlimber and chain Notched pilot faces with low mounted angled lifting slots Deck-mounted MU receptacle Tall jacking pads with holes (early) ACI labels mounted on plates attached to handrail stanchions Fully-assembled Multiple road numbers Class lights (non-operating) Printed and LED-illuminated number boards* Front and rear 3-hose MU hose clusters with silver gladhands Body mounted knuckle couplers; Micro-Trains® compatible Coupler box accepts Micro-Trains 1015/1016 couplers without modification Front late small deck extension Late front drop step (“fixed”) Scale sectioned treadplate detail on the walkways Front "tall" stepwells and rear “ladder” steps Standard EMD headlight in numberboard housing Dash-2 cab with bolted side window panels and D&RGW blue flag bracket Original cab front door Standard Mirror mounted fore of cab side windows, both sides Standard EMD sunshades and long sunshade tracks Lost-wax brass Nathan M3R1 (“M-3”) three-chime horn, center rear of number board housing Large Sinclair Excalibur “ice skate” antenna (communications) mounted on cab roof Early electrical cabinet "zig-zag" seam, further from rear of cab Intermediate inertial air intake grills with top drip rail Standard turbo exhaust stack Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Accurate hood door and long hood detail See-through standard 48” dynamic brake fan housings with fan blades visible inside See-through radiator intake compartment Etched-metal radiator exhaust grills with radiator shutters visible underneath Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets (outboard only Speed recorder third axle, right side Sill-mounted EFCO Frame-mounted bell Graham-White (Salem) brand 824-170 and 818-170 primary and secondary centrifugal air filters (accordion-style) Standard air tanks 4,000 gallon fuel tank with dual fuel fillers, vertical gauge, round gauge in tank and vertical breather pipe Factory-applied wire grab irons, windshield wipers, trainline hoses with silver gladhands, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible even under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 3/4” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” One (1) cube-type speaker EMD 16 Cylinder 645E3 prime mover Operates on both DC and DCC layouts

• DCC vorbereitet (Schnittstelle vorhanden)

Road Number Specific ScaleTrains All-new model Era: Mid 1990s – Early 2000s UP Series mixed, built 2-3/78 (ex-SP Series 8357 - 837) Road numbers 4425 (ex-SP 8361) and 4429 (ex-SP 8371) Data label and lettering placement variations Plated over front and blanked rear red LED Pyle-National 17540 “UDE” Gyralites Blanked class lights with bolted plates front and rear Round walkway lights (non-operating) 123” “snoot” low short hood with wheel handbrake and round vent on top SP “split” cab sub-base doors with lift-off hinges Dash-2 cab with bolted side window panels, SP/SSW blue flag bracket, and modified “L” front window “Whip” radio antenna mounted on ground plane over dust bin and dual Locotrol antenna ground planes on cab roof with conduits Early electrical cabinet “zig-zag” seam, further from rear of cab Intermediate inertial air intake grills with top drip rail Extended-range dynamic brakes Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets; angled rear uncoupling lever with four mounting brackets Fully-assembled Multiple road numbers Operating LED-illuminated front deck-mounted ditch lights* Printed and LED-illuminated number boards* Vapor Corp. cab roof HVAC Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Body mounted knuckle couplers; Micro-Trains® compatible Coupler box accepts Micro-Trains 1015/1016 couplers without modification Front pilot anticlimber Scale sectioned treadplate detail on the walkways Front "tall" stepwells and rear “ladder” steps SP nose headlight package Cab front door with additional door lock at top of door Tall clear wind wings with angled top corners mounted fore and aft of cab side window on both sides of cab Rear cab side vent on left side Standard EMD sunshades and long sunshade tracks Lost-wax brass Leslie RS-3L-R three-chime horn on clearance bracket, relocated to long hood roof Welded ECAFB (late) Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Accurate hood door and long hood detail See-through standard 48” dynamic brake fan housings with fan blades visible inside See-through radiator intake compartment Etched-metal radiator exhaust grills with radiator shutters visible underneath Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets (outboard only Speed recorder first axle, left side Four-hole SP jacking pads Spare knuckle holders on fuel tank near fuel filler Sill-mounted EFCO Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, windshield wipers, trainline hoses with silver gladhands, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible even under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 3/4” Recommended radius: 11” DC/DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with E24 connector

• mit DCC Motordekoder
• mit Sound

Road Number Specific ScaleTrains All-new model Era: 2007+ Series 100 to 199; built 4-5/95 Road number 177 Yellow swapped HVAC unit Yellow sill stripes Gray swapped air tanks Road number 199 Gray swapped HVAC unit Yellow sill stripes Gray swapped air tanks Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights LED-illuminated high-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door with window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door without latch GE safety cab with three (3) side windows Right side cab under floor access doors: four screened louver sections per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communication antenna; small Sinclair “ice skate” End of Train (EOT) telemetry antenna Early: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels Continuous reinforcement rib under dynamic brake intake grilles Standard dynamic brake exhaust (2-port) Forward right-side air intake grille Left side auxiliary cab: three (3) tall doors with latches on the #2 Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Early curved engine cab profile Lost-wax brass cast Nathan AirChime P3 (P24R1 configuration) horn mounted on engine cab “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, short grilles Low-mounted rear sandfiller Early “box” lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Prime) 975-075 air filters Graham-White 975-100 “twin tower” air filter dryer 5,000 gallon fuel tank Single fuel fills per side Round and vertical analog fuel gauges; digital fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket SP-style spare coupler knuckle boxes on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 Nano DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts DC/DCC ready locomotives also feature: Operates on DC layouts DCC ready with Nano connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate

• mit DCC Motordekoder
• mit Sound

Road number 9647 (ex-SP 8183) Era: 2000-2014 Patched former Southern Pacific unit Unique destressed paint and lettering Last patched SP C44-9W before repainting Yellow sill stripes Fully-assembled Multiple road numbers Operating LED-illuminated front deck-mounted ditch lights* Printed and LED-illuminated number boards* Factory-applied detail parts: wire grab irons, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, MU cable, uncoupling levers, windshield wipers, mirrors, sunshades, brake wheel, and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door without window Front LED-illuminated headlight with lenses on low short hood GE safety cab with three (3) side windows Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communications antenna, small Sinclair “ice skate” End of Train (EOT) telemetry antenna, “wedge” antenna, and GPS dome Motive Equipment Inc. (MEI) ME7000 HVAC Unit Early (curved) engine cab profile Early flanged exhaust stack housing “Bathtub” exhaust silencer Early radiator door grille pattern (all the same height) Low-mounted rear sandfiller Early lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Separate air tanks with upper mounting brackets Fuel tank mounted steel bell 5,000 gallon fuel tank Dual fuel fills per side with rear fill “blanked” Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature ESU-LokSound 5 Micro DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

• mit DCC Motordekoder

Black Trucks Road Number Specific Era: late 1960s to 1980s Fully assembled 24-C-GTE Class insulated body 24,000-gallon capacity Welded seams Intricate electrical and water plumbing Factory-applied air tank, brake cylinder, and control valve Brake beam Handbrake housing with finely detailed wheel and chain Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses Durable body-mounted die-cast metal semi-scale Type E knuckle couplers Commonwealth 3-axle trucks with rotating bearing caps 36” machined metal wheels Accurately profiled .110" wide wheel tread Directional front and rear LED lighting 2-function DCC programmable decoder Operate using DC and DCC Operates on Code 70, 83 and 100 rail Printing and lettering legible even under magnification Weighted above Industry standards Packaging safely stores model Color matched to existing Tru-Color Paint colors whenever possible Minimum radius: 18” Truck safety chains available separately (SXT80111) – requires 22” minimum radius curve

• mit DCC Motordekoder

Silver Trucks Road Number Specific Era: late 1960s to 1980s Fully assembled 24-C-GTE Class insulated body 24,000-gallon capacity Welded seams Intricate electrical and water plumbing Factory-applied air tank, brake cylinder, and control valve Brake beam Handbrake housing with finely detailed wheel and chain Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses Durable body-mounted die-cast metal semi-scale Type E knuckle couplers Commonwealth 3-axle trucks with rotating bearing caps 36” machined metal wheels Accurately profiled .110" wide wheel tread Directional front and rear LED lighting 2-function DCC programmable decoder Operate using DC and DCC Operates on Code 70, 83 and 100 rail Printing and lettering legible even under magnification Weighted above Industry standards Packaging safely stores model Color matched to existing Tru-Color Paint colors whenever possible Minimum radius: 18” Truck safety chains available separately (SXT80111) – requires 22” minimum radius curve

• mit DCC Motordekoder

Fully assembled, 23-C-GTE Class riveted body, 23,000-gallon capacity, Riveted seams, Photo-etched metal tender deck walkway, Intricate electrical and water plumbing, Factory-applied air tank, brake cylinder, and control valve, Brake beam, Handbrake housing with finely detailed wheel and chain, Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses, Durable body-mounted die-cast metal semi-scale Type E knuckle couplers, Buckeye 3-axle trucks with SKF bearings, 36” machined metal wheels, Accurately profiled .110" wide wheel tread, Operating rear tender LED light, 2-function DCC programmable decoder, Operate using DC and DCC, Operates on Code 70, 83 and 100 rail, Truck safety chains available separately (SXT80111) – requires 22” minimum radius curve, Printing and lettering legible even under magnification, Color matched to Tru-Color paint, Weighted above Industry standards, Packaging safely stores model, Minimum radius: 18”

- geeignet für RSD15, RSD17; C628, C630, C636, C630M, C855

Tsunami TSU-BW1000 DCC Sound Decoder, einfacher Einbau, Motordecoder, Lichtsteuerung und Digitalsound auf einer Platine

- geeignet für AS-16, AS-416, AS-616, DR-4-4-1500, DR-6-4-1500, RF-16, DRS-6-4-1500, DRS-4-4--1500, DRS-6-6-1500

Tsunami TSU-BW1000 DCC Sound Decoder, einfacher Einbau, Motordecoder, Lichtsteuerung und Digitalsound auf einer Platine

- geeignet für RS11, RSD, RS32, RS36, C420, M420, C424, RD-18, FPA4, FPB4 - für analogen und digitalen Betrieb geeignet -

Tsunami TSU-1000 DCC Sound Decoder, einfacher Einbau, Motordecoder, Lichtsteuerung und Digitalsound auf einer Platine. - DCC-Norm - 16-bit Soundprozessor - Sound läuft synchron zur Geschwindigkeit, einstellbar. - 14 Funktionen - 4 Lichteffekte einstellbar - Hyperlight Lighting System - unter 14 versch. Lichteffekten wählen - Lautstärkeregelung - 1W / 8 Ohm Verstärker - 4-stellige Lokadressen bis 9999 - Motordecoder bis 1 A / 27V belastbar - jeder Funktionsausgang bis 100 mA belastbar - mit Kondensator - Hyperdrive Motion Control System mit 2048 Fahrstufen - ohne Lausprecher

- für analogen und digitalen Betrieb geeignet -

Tsunami Sound Decoder, einfacher Einbau, Motordecoder, Lichtsteuerung und Digitalsound auf einer Platine. Die 28 Funktionen wie Glocke, Horn, Luftpumpe, Dampf, Kupplung, Bremsen, Generator, Kohle schaufeln, usw. lassen sich über die F-Tasten auslösen und nach Wahl verschieben. Die Laustärke der einzelnen Soundeffekte läßt sich über CV individuell einstellen. Besitzer der Digitrax DT-400 werden zusätzlich einen hörbaren Unterschied zu anderen Steuerungen feststellen. - DCC-Norm - 32-bit Soundprozessor - Soundverstärker mit noch mehr Leistung - Sound läuft synchron zur Geschwindigkeit, einstellbar. - 28 Funktionen - 4 Lichteffekte einstellbar - einstellbare Bremsen - Hyperlight Lighting System - unter 20 versch. Lichteffekten wählen - Flex-Map functi on mapping - Funktionen verschieben - Lautstärkeregelung - 2W / 8 Ohm Verstärker - 4-stellige Lokadressen bis 9999 - Motordecoder bis 1 A / 22V belastbar - jeder Funktionsausgang bis 100 mA belastbar - 30.5 x 15.5 x 6.5mm - ohne Lausprecher - 7.5V – 22V Diesellok: - jede Dieselversion (EMD, GE usw.) enthält bis zu 9 Hersteller spezifische Motoren (mit/ohne Turbo usw.) - Anlassen und herunter Fahren in 8 Stufen - Danamische Bremse und Dieselsound unter Last/Beladung einstellbar - über 40 Hörner einstellbar - versch. Effekte wie Kompressor, Glocke Kupplung usw. - Fireman Ed is ready to work, versch. Cab Sounds wählbar - Schienenklackern, Tanken, Cab Unterhaltung