Neuerscheinung! Auslieferung Juni 2026

• DCC vorbereitet (Schnittstelle vorhanden)

Road Number Specific ScaleTrains New road numbers Era: 2016 to present: built 2016 HypoTypical™Conrail ‘Quality AC’ Scheme Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck mounted alternating ditch lights** Printed and LED lighted number boards* LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Sill-mounted brake stick holder Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain Battery charging receptacles on front and rear pilots ECP brake equipment box and cable details on front and rear pilot faces See-through round-hole stepwell steps Walkway with front and rear anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch and hinge Wide profile end handrails Front high (cab) mounted headlight Extra nose front grab iron on engineer’s side of cab Nose door with window Cab with barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with triple couduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Standard radiator grille cover hold downs Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side with rear fill “blanked” Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22 DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Neuerscheinung! Auslieferung Juni 2026

• DCC vorbereitet (Schnittstelle vorhanden)

Road Number Specific ScaleTrains New road numbers Era: 2016 to present Series 2670 to 2739; built 7-9/2016 HypoTypical™ Chicago & NorthWestern Operation Lifesaver Scheme Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front deck mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable without attachment chain; wireworm holding brackets mounted under front anticlimber; and rear fixed drop step See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with handle and rotating hinge Narrow profile end handrails Front nose headlight Nose door without window Cab with barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on left side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with triple conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side with rear fill “blanked” Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Neuerscheinung! Auslieferung Juni 2026

• DCC vorbereitet (Schnittstelle vorhanden)

Road Number Specific ScaleTrains New road numbers Era: 2016 to present Series 2670 to 2739; built 7-9/2016 HypoTypical™ Chicago & NorthWestern Operation Lifesaver Scheme Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front deck mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable without attachment chain; wireworm holding brackets mounted under front anticlimber; and rear fixed drop step See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with handle and rotating hinge Narrow profile end handrails Front nose headlight Nose door without window Cab with barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on left side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with triple conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side with rear fill “blanked” Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Neuerscheinung! Auslieferung Juni 2026

• mit DCC Motordekoder
• mit Sound

Road Number Specific ScaleTrains New road numbers Era: 2016 to present Series 2670 to 2739; built 7-9/2016 HypoTypical™ Chicago & NorthWestern Operation Lifesaver Scheme Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front deck mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable without attachment chain; wireworm holding brackets mounted under front anticlimber; and rear fixed drop step See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with handle and rotating hinge Narrow profile end handrails Front nose headlight Nose door without window Cab with barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on left side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with triple conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side with rear fill “blanked” Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Neuerscheinung! Auslieferung Juni 2026

• DCC vorbereitet (Schnittstelle vorhanden)

Road Number Specific ScaleTrains New road numbers Era: 2016 to present Series 2670 to 2739; built 7-9/2016 HypoTypical™ Chicago & NorthWestern Operation Lifesaver Scheme Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front deck mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable without attachment chain; wireworm holding brackets mounted under front anticlimber; and rear fixed drop step See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with handle and rotating hinge Narrow profile end handrails Front nose headlight Nose door without window Cab with barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on left side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with triple conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side with rear fill “blanked” Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Neuerscheinung! Auslieferung Juni 2026

• mit DCC Motordekoder
• mit Sound

Road Number Specific ScaleTrains New road numbers Era: 2016 to present Series 2670 to 2739; built 7-9/2016 HypoTypical™ Chicago & NorthWestern Operation Lifesaver Scheme Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front deck mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable without attachment chain; wireworm holding brackets mounted under front anticlimber; and rear fixed drop step See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with handle and rotating hinge Narrow profile end handrails Front nose headlight Nose door without window Cab with barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on left side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with triple conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side with rear fill “blanked” Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Neuerscheinung! Auslieferung Juni 2026

• mit DCC Motordekoder
• mit Sound

Road Number Specific ScaleTrains New road numbers Era: 2016 to present Series 2670 to 2739; built 7-9/2016 HypoTypical™ Chicago & NorthWestern Operation Lifesaver Scheme Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front deck mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable without attachment chain; wireworm holding brackets mounted under front anticlimber; and rear fixed drop step See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with handle and rotating hinge Narrow profile end handrails Front nose headlight Nose door without window Cab with barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on left side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with triple conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side with rear fill “blanked” Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Neuerscheinung! Auslieferung Juni 2026

• mit DCC Motordekoder
• mit Sound

Road Number Specific ScaleTrains New paint scheme Era: 2017-present: built 2017 HypoTypical™ Burlington Northern Whiteface Scheme Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck mounted alternating ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22" DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Neuerscheinung! Auslieferung Juni 2026

• mit DCC Motordekoder
• mit Sound

Road Number Specific ScaleTrains New paint scheme Era: 2017-present: built 2017 HypoTypical™ Burlington Northern Whiteface Scheme Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck mounted alternating ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22" DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Neuerscheinung! Auslieferung Juni 2026

• mit DCC Motordekoder
• mit Sound

Road Number Specific ScaleTrains New paint scheme Era: 2017-present: built 2017 HypoTypical™ Burlington Northern Whiteface Scheme Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck mounted alternating ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22" DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Neuerscheinung! Auslieferung Juni 2026

• DCC vorbereitet (Schnittstelle vorhanden)

Road Number Specific ScaleTrains New paint scheme Era: 2017-present: built 2017 HypoTypical™ Burlington Northern Whiteface Scheme Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck mounted alternating ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22" DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Neuerscheinung! Auslieferung Juni 2026

• DCC vorbereitet (Schnittstelle vorhanden)

Road Number Specific ScaleTrains New paint scheme Era: 2017-present: built 2017 HypoTypical™ Burlington Northern Whiteface Scheme Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck mounted alternating ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22" DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Neuerscheinung! Auslieferung Juni 2026

• DCC vorbereitet (Schnittstelle vorhanden)

Road Number Specific ScaleTrains New paint scheme Era: 2017-present: built 2017 HypoTypical™ Burlington Northern Whiteface Scheme Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck mounted alternating ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22" DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Neuerscheinung! Auslieferung Juni 2026

• DCC vorbereitet (Schnittstelle vorhanden)

Road Number Specific ScaleTrains New paint scheme Era: 2017-present: built 2017 HypoTypical™ Santa Fe Super Fleet Scheme Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” Operates on DC layouts DCC ready with 21-pin connector

Neuerscheinung! Auslieferung Juni 2026

• DCC vorbereitet (Schnittstelle vorhanden)

Road Number Specific ScaleTrains New paint scheme Era: 2017-present: built 2017 HypoTypical™ Santa Fe Super Fleet Scheme Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” Operates on DC layouts DCC ready with 21-pin connector

Neuerscheinung! Auslieferung Juni 2026

• DCC vorbereitet (Schnittstelle vorhanden)

Road Number Specific ScaleTrains New paint scheme Era: 2017-present: built 2017 HypoTypical™ Santa Fe Super Fleet Scheme Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” Operates on DC layouts DCC ready with 21-pin connector

Neuerscheinung! Auslieferung Juni 2026

• mit DCC Motordekoder
• mit Sound

Road Number Specific ScaleTrains New paint scheme Era: 2017-present: built 2017 HypoTypical™ Santa Fe Super Fleet Scheme Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Neuerscheinung! Auslieferung Juni 2026

• mit DCC Motordekoder
• mit Sound

Road Number Specific ScaleTrains New paint scheme Era: 2017-present: built 2017 HypoTypical™ Santa Fe Super Fleet Scheme Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Neuerscheinung! Auslieferung Juni 2026

• mit DCC Motordekoder
• mit Sound

Road Number Specific ScaleTrains New paint scheme Era: 2017-present: built 2017 HypoTypical™ Santa Fe Super Fleet Scheme Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck mounted ditch lights Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Rust-color painted wheelsets AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

• DCC vorbereitet (Schnittstelle vorhanden)

Road Number Specific ScaleTrains All-new model Era: 1963 to Late 1960s Series 2222 to 2251, built 4-5/63 Fully-assembled Multiple road numbers Directional LED headlights Class lights (non-operating) PRR inductive “Trainphone” antenna mounted along the cab and long hood roof Printed and LED-illuminated cab and rear number boards* Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Body mounted knuckle couplers; Micro-Trains® compatible Coupler box accepts Micro-Trains 1015/1016 couplers without modification Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle Dummy multiple unit (MU) receptacle mounted to end handrail stanchions “Short” stepwells Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents No cab vents Tall clear wind wings mounted fore and aft of cab side window on both sides of cab No sunshades or sunshade tracks Lost-wax brass cast Leslie SU-3L-R horn mounted on right side cab eave Accurate hood door and long hood detail Late single-panel inertial compartment Stamped inertial air intake grills with vertical stiffeners Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Late dynamic brake intake grills with horizontal wires through vertical vanes 6-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell Prime air filter (can style) 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, windshield wipers, trainline hoses with silver gladhands, air tanks and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible even under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 3/4” Recommended radius: 11” Operable on DC layouts DCC ready with E24 connector