新商品! 到貨於 第1季 2026

• 與 DCC 解碼器
• 商品有聲音

Norfolk Southern/Thoroughbred/Dashed Sill Stripe New paint scheme Era: 2001 to 2010s Series 9560 to 9744, built 12/2000-12/2001 NS “Thoroughbred” with angled sill striping Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) LED-illuminated front, rear, and side walkway lights* LED-illuminated front and rear deck-mounted alternating ditch lights** LED-illuminated high-mount cab number boards* LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall, narrow snowplow with open doors and grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door with window Two-piece nose top grab irons Electrical cabinet access doors with barrel bolt safety latches Battery cabinet access door with latch GE safety cab with three (3) side windows Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Dual wind deflector mounted fore and aft of sliding cab windows on both sides Dual large Sinclair “ice skate” communication antennas, and single small Sinclair “ice skate” antennas Electrical cabinet with barrel bolt safety latches, step on rear, and spare knuckle basket Dayton-Phoenix GE Side-Mount Model 2806220 HVAC unit Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with raised “dot” treadplate on centerline Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Electric handbrake without brake wheel, and with electric brake actuator on right front truck side frame Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sand fill Late angled lifting “tabs” on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on the right front and left rear side frames Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Prime) 975-075 Air Filters Graham-White 975-100 “Twin Tower” Air Dryer 5,000-gallon fuel tank with angled weld seam and clean out on left side Single fuel fills per side Round and vertical analog fuel gauges, and digital fuel gauges Fuel tank-mounted electronic bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC

新商品! 到貨於 第1季 2026

• 與 DCC 解碼器
• 商品有聲音

Norfolk Southern/Thoroughbred/Dashed Sill Stripe New paint scheme Era: 2001 to 2010s Series 9560 to 9744, built 12/2000-12/2001 NS “Thoroughbred” with angled sill striping Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) LED-illuminated front, rear, and side walkway lights* LED-illuminated front and rear deck-mounted alternating ditch lights** LED-illuminated high-mount cab number boards* LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall, narrow snowplow with open doors and grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door with window Two-piece nose top grab irons Electrical cabinet access doors with barrel bolt safety latches Battery cabinet access door with latch GE safety cab with three (3) side windows Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Dual wind deflector mounted fore and aft of sliding cab windows on both sides Dual large Sinclair “ice skate” communication antennas, and single small Sinclair “ice skate” antennas Electrical cabinet with barrel bolt safety latches, step on rear, and spare knuckle basket Dayton-Phoenix GE Side-Mount Model 2806220 HVAC unit Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with raised “dot” treadplate on centerline Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Electric handbrake without brake wheel, and with electric brake actuator on right front truck side frame Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sand fill Late angled lifting “tabs” on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on the right front and left rear side frames Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Prime) 975-075 Air Filters Graham-White 975-100 “Twin Tower” Air Dryer 5,000-gallon fuel tank with angled weld seam and clean out on left side Single fuel fills per side Round and vertical analog fuel gauges, and digital fuel gauges Fuel tank-mounted electronic bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC

新商品! 到貨於 第1季 2026

• 與DCC的使用（DCC接口）

Norfolk Southern/Thoroughbred/Dashed Sill Stripe New paint scheme Era: 2001 to 2010s Series 9560 to 9744, built 12/2000-12/2001 NS “Thoroughbred” with angled sill striping Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) LED-illuminated front, rear, and side walkway lights* LED-illuminated front and rear deck-mounted alternating ditch lights** LED-illuminated high-mount cab number boards* LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall, narrow snowplow with open doors and grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door with window Two-piece nose top grab irons Electrical cabinet access doors with barrel bolt safety latches Battery cabinet access door with latch GE safety cab with three (3) side windows Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Dual wind deflector mounted fore and aft of sliding cab windows on both sides Dual large Sinclair “ice skate” communication antennas, and single small Sinclair “ice skate” antennas Electrical cabinet with barrel bolt safety latches, step on rear, and spare knuckle basket Dayton-Phoenix GE Side-Mount Model 2806220 HVAC unit Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with raised “dot” treadplate on centerline Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Electric handbrake without brake wheel, and with electric brake actuator on right front truck side frame Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sand fill Late angled lifting “tabs” on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on the right front and left rear side frames Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Prime) 975-075 Air Filters Graham-White 975-100 “Twin Tower” Air Dryer 5,000-gallon fuel tank with angled weld seam and clean out on left side Single fuel fills per side Round and vertical analog fuel gauges, and digital fuel gauges Fuel tank-mounted electronic bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC

新商品! 到貨於 第1季 2026

• 與DCC的使用（DCC接口）

Norfolk Southern/Thoroughbred/Dashed Sill Stripe New paint scheme Era: 2001 to 2010s Series 9560 to 9744, built 12/2000-12/2001 NS “Thoroughbred” with angled sill striping Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) LED-illuminated front, rear, and side walkway lights* LED-illuminated front and rear deck-mounted alternating ditch lights** LED-illuminated high-mount cab number boards* LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall, narrow snowplow with open doors and grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door with window Two-piece nose top grab irons Electrical cabinet access doors with barrel bolt safety latches Battery cabinet access door with latch GE safety cab with three (3) side windows Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Dual wind deflector mounted fore and aft of sliding cab windows on both sides Dual large Sinclair “ice skate” communication antennas, and single small Sinclair “ice skate” antennas Electrical cabinet with barrel bolt safety latches, step on rear, and spare knuckle basket Dayton-Phoenix GE Side-Mount Model 2806220 HVAC unit Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with raised “dot” treadplate on centerline Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Electric handbrake without brake wheel, and with electric brake actuator on right front truck side frame Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sand fill Late angled lifting “tabs” on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on the right front and left rear side frames Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Prime) 975-075 Air Filters Graham-White 975-100 “Twin Tower” Air Dryer 5,000-gallon fuel tank with angled weld seam and clean out on left side Single fuel fills per side Round and vertical analog fuel gauges, and digital fuel gauges Fuel tank-mounted electronic bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC

新商品! 到貨於 第1季 2026

• 與DCC的使用（DCC接口）

Norfolk Southern/Thoroughbred/Dashed Sill Stripe New paint scheme Era: 2001 to 2010s Series 9560 to 9744, built 12/2000-12/2001 NS “Thoroughbred” with angled sill striping Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) LED-illuminated front, rear, and side walkway lights* LED-illuminated front and rear deck-mounted alternating ditch lights** LED-illuminated high-mount cab number boards* LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall, narrow snowplow with open doors and grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door with window Two-piece nose top grab irons Electrical cabinet access doors with barrel bolt safety latches Battery cabinet access door with latch GE safety cab with three (3) side windows Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Dual wind deflector mounted fore and aft of sliding cab windows on both sides Dual large Sinclair “ice skate” communication antennas, and single small Sinclair “ice skate” antennas Electrical cabinet with barrel bolt safety latches, step on rear, and spare knuckle basket Dayton-Phoenix GE Side-Mount Model 2806220 HVAC unit Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with raised “dot” treadplate on centerline Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Electric handbrake without brake wheel, and with electric brake actuator on right front truck side frame Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sand fill Late angled lifting “tabs” on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on the right front and left rear side frames Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Prime) 975-075 Air Filters Graham-White 975-100 “Twin Tower” Air Dryer 5,000-gallon fuel tank with angled weld seam and clean out on left side Single fuel fills per side Round and vertical analog fuel gauges, and digital fuel gauges Fuel tank-mounted electronic bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC

新商品! 到貨於 第1季 2026

• 與DCC的使用（DCC接口）

Norfolk Southern/Thoroughbred/Dashed Sill Stripe New paint scheme Era: 2001 to 2010s Series 9560 to 9744, built 12/2000-12/2001 NS “Thoroughbred” with angled sill striping Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) LED-illuminated front, rear, and side walkway lights* LED-illuminated front and rear deck-mounted alternating ditch lights** LED-illuminated high-mount cab number boards* LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall, narrow snowplow with open doors and grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door with window Two-piece nose top grab irons Electrical cabinet access doors with barrel bolt safety latches Battery cabinet access door with latch GE safety cab with three (3) side windows Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Dual wind deflector mounted fore and aft of sliding cab windows on both sides Dual large Sinclair “ice skate” communication antennas, and single small Sinclair “ice skate” antennas Electrical cabinet with barrel bolt safety latches, step on rear, and spare knuckle basket Dayton-Phoenix GE Side-Mount Model 2806220 HVAC unit Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with raised “dot” treadplate on centerline Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Electric handbrake without brake wheel, and with electric brake actuator on right front truck side frame Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sand fill Late angled lifting “tabs” on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on the right front and left rear side frames Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Prime) 975-075 Air Filters Graham-White 975-100 “Twin Tower” Air Dryer 5,000-gallon fuel tank with angled weld seam and clean out on left side Single fuel fills per side Round and vertical analog fuel gauges, and digital fuel gauges Fuel tank-mounted electronic bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC

新商品! 到貨於 第1季 2026

• 與 DCC 解碼器
• 商品有聲音

Norfolk Southern/Operation Lifesaver New paint scheme Era: 1999 to 2010s Series 9245 to 9394, built 10/1998-6/1999 “Operation Lifesaver” Scheme Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) LED-illuminated front, rear, and side walkway lights* LED-illuminated front and rear deck-mounted alternating ditch lights** LED-illuminated high-mount cab number boards* LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) End of Train Device (EOTD) mounting bracket on right rear truck sideframe Tall, narrow snowplow with open doors and grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door with window Two-piece nose top grab irons Electrical cabinet access doors with barrel bolt safety latches Battery cabinet access door with latch GE safety cab with three (3) side windows Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Dual wind deflector mounted fore and aft of sliding cab windows on both sides Dual large Sinclair “ice skate” communication antennas, and dual small Sinclair “ice skate” antennas Electrical cabinet with barrel bolt safety latches, step on rear, and spare knuckle basket Dayton-Phoenix GE Side-Mount Model 2806220 HVAC unit Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with raised “dot” treadplate on centerline Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Electric handbrake without brake wheel, and with electric brake actuator on right front truck side frame Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on the right front and left rear side frames Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Prime) 975-075 Air Filters Graham-White 975-100 “Twin Tower” Air Dryer 5,000-gallon fuel tank with angled weld seam and clean out on left side Single fuel fills per side Round and vertical analog fuel gauges, and digital fuel gauges Fuel tank-mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC

新商品! 到貨於 第1季 2026

• 與 DCC 解碼器
• 商品有聲音

Norfolk Southern/Operation Lifesaver New paint scheme Era: 1999 to 2010s Series 9245 to 9394, built 10/1998-6/1999 “Operation Lifesaver” Scheme Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) LED-illuminated front, rear, and side walkway lights* LED-illuminated front and rear deck-mounted alternating ditch lights** LED-illuminated high-mount cab number boards* LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) End of Train Device (EOTD) mounting bracket on right rear truck sideframe Tall, narrow snowplow with open doors and grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door with window Two-piece nose top grab irons Electrical cabinet access doors with barrel bolt safety latches Battery cabinet access door with latch GE safety cab with three (3) side windows Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Dual wind deflector mounted fore and aft of sliding cab windows on both sides Dual large Sinclair “ice skate” communication antennas, and dual small Sinclair “ice skate” antennas Electrical cabinet with barrel bolt safety latches, step on rear, and spare knuckle basket Dayton-Phoenix GE Side-Mount Model 2806220 HVAC unit Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with raised “dot” treadplate on centerline Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Electric handbrake without brake wheel, and with electric brake actuator on right front truck side frame Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on the right front and left rear side frames Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Prime) 975-075 Air Filters Graham-White 975-100 “Twin Tower” Air Dryer 5,000-gallon fuel tank with angled weld seam and clean out on left side Single fuel fills per side Round and vertical analog fuel gauges, and digital fuel gauges Fuel tank-mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC

新商品! 到貨於 第1季 2026

• 與DCC的使用（DCC接口）

Norfolk Southern/Operation Lifesaver New paint scheme Era: 1999 to 2010s Series 9245 to 9394, built 10/1998-6/1999 “Operation Lifesaver” Scheme Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) LED-illuminated front, rear, and side walkway lights* LED-illuminated front and rear deck-mounted alternating ditch lights** LED-illuminated high-mount cab number boards* LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) End of Train Device (EOTD) mounting bracket on right rear truck sideframe Tall, narrow snowplow with open doors and grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door with window Two-piece nose top grab irons Electrical cabinet access doors with barrel bolt safety latches Battery cabinet access door with latch GE safety cab with three (3) side windows Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Dual wind deflector mounted fore and aft of sliding cab windows on both sides Dual large Sinclair “ice skate” communication antennas, and dual small Sinclair “ice skate” antennas Electrical cabinet with barrel bolt safety latches, step on rear, and spare knuckle basket Dayton-Phoenix GE Side-Mount Model 2806220 HVAC unit Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with raised “dot” treadplate on centerline Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Electric handbrake without brake wheel, and with electric brake actuator on right front truck side frame Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on the right front and left rear side frames Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Prime) 975-075 Air Filters Graham-White 975-100 “Twin Tower” Air Dryer 5,000-gallon fuel tank with angled weld seam and clean out on left side Single fuel fills per side Round and vertical analog fuel gauges, and digital fuel gauges Fuel tank-mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC

新商品! 到貨於 第1季 2026

• 與DCC的使用（DCC接口）

Norfolk Southern/Operation Lifesaver New paint scheme Era: 1999 to 2010s Series 9245 to 9394, built 10/1998-6/1999 “Operation Lifesaver” Scheme Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) LED-illuminated front, rear, and side walkway lights* LED-illuminated front and rear deck-mounted alternating ditch lights** LED-illuminated high-mount cab number boards* LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) End of Train Device (EOTD) mounting bracket on right rear truck sideframe Tall, narrow snowplow with open doors and grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door with window Two-piece nose top grab irons Electrical cabinet access doors with barrel bolt safety latches Battery cabinet access door with latch GE safety cab with three (3) side windows Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Dual wind deflector mounted fore and aft of sliding cab windows on both sides Dual large Sinclair “ice skate” communication antennas, and dual small Sinclair “ice skate” antennas Electrical cabinet with barrel bolt safety latches, step on rear, and spare knuckle basket Dayton-Phoenix GE Side-Mount Model 2806220 HVAC unit Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with raised “dot” treadplate on centerline Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Electric handbrake without brake wheel, and with electric brake actuator on right front truck side frame Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on the right front and left rear side frames Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Prime) 975-075 Air Filters Graham-White 975-100 “Twin Tower” Air Dryer 5,000-gallon fuel tank with angled weld seam and clean out on left side Single fuel fills per side Round and vertical analog fuel gauges, and digital fuel gauges Fuel tank-mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC

新商品! 到貨於 第1季 2026

• 與 DCC 解碼器
• 商品有聲音

Kansas City Southern/ex-BNSF Heritage II Patched/Exhaust Burn Marks New roadname Era: 2021 to Present Series 4420 to 4469; ex-BNSF 4772-4971, built 1998 KCS 4455 Low GE-style plow Prime Manufacturing PM5191 HVAC unit Octagonal antenna dome and long STI-CO PTC Dual Track Antenna System with Radome covers Graham-White 994-500 Series Air Dryer Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights** LED-illuminated high-mount cab number boards* Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Nose door with window Two-piece nose top grab irons Standard electrical cabinet access doors Battery cabinet access door without latch GE safety cab with “gull-wing” roof profile and four (4) side windows Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls In-cab grade crossing camera Tinted cab side windows Medium mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Octagonal antenna dome with small LinkUp International PTC antenna cabinets Electrical cabinet with drop grab irons on rear Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with tri-fold power assembly access doors Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, short, short Tall latched access door on long hood end High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on right front and left rear side frames Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Salem) 824-100 Centrifugal Air Filters 5,000-gallon fuel tank with vertical weld seams Dual fuel fills per side Round and vertical analog fuel gauges Fuel tank-mounted steel bell Separate air tanks with lower mounting brackets and connector pipe Early, square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC.

新商品! 到貨於 第1季 2026

• 與DCC的使用（DCC接口）

Kansas City Southern/ex-BNSF Heritage II Patched/Exhaust Burn Marks New roadname Era: 2021 to Present Series 4420 to 4469; ex-BNSF 4772-4971, built 1998 KCS 4455 Low GE-style plow Prime Manufacturing PM5191 HVAC unit Octagonal antenna dome and long STI-CO PTC Dual Track Antenna System with Radome covers Graham-White 994-500 Series Air Dryer Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights** LED-illuminated high-mount cab number boards* Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Nose door with window Two-piece nose top grab irons Standard electrical cabinet access doors Battery cabinet access door without latch GE safety cab with “gull-wing” roof profile and four (4) side windows Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls In-cab grade crossing camera Tinted cab side windows Medium mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Octagonal antenna dome with small LinkUp International PTC antenna cabinets Electrical cabinet with drop grab irons on rear Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with tri-fold power assembly access doors Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, short, short Tall latched access door on long hood end High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on right front and left rear side frames Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Salem) 824-100 Centrifugal Air Filters 5,000-gallon fuel tank with vertical weld seams Dual fuel fills per side Round and vertical analog fuel gauges Fuel tank-mounted steel bell Separate air tanks with lower mounting brackets and connector pipe Early, square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC.

新商品! 到貨於 第1季 2026

• 與 DCC 解碼器
• 商品有聲音

Kansas City Southern/ex-BNSF Heritage II Patched/Faded Orange Replacement HVAC New roadname Era: 2021 to Present Series 4420 to 4469; ex-BNSF 4772-4971, built 1998 KCS 4455 Low GE-style plow Prime Manufacturing PM5191 HVAC unit Octagonal antenna dome and long STI-CO PTC Dual Track Antenna System with Radome covers Graham-White 994-500 Series Air Dryer Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights** LED-illuminated high-mount cab number boards* Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Nose door with window Two-piece nose top grab irons Standard electrical cabinet access doors Battery cabinet access door without latch GE safety cab with “gull-wing” roof profile and four (4) side windows Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls In-cab grade crossing camera Tinted cab side windows Medium mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Octagonal antenna dome with small LinkUp International PTC antenna cabinets Electrical cabinet with drop grab irons on rear Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with tri-fold power assembly access doors Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, short, short Tall latched access door on long hood end High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on right front and left rear side frames Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Salem) 824-100 Centrifugal Air Filters 5,000-gallon fuel tank with vertical weld seams Dual fuel fills per side Round and vertical analog fuel gauges Fuel tank-mounted steel bell Separate air tanks with lower mounting brackets and connector pipe Early, square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC.

新商品! 到貨於 第1季 2026

• 與DCC的使用（DCC接口）

Kansas City Southern/ex-BNSF Heritage II Patched/Faded Orange Replacement HVAC New roadname Era: 2021 to Present Series 4420 to 4469; ex-BNSF 4772-4971, built 1998 KCS 4455 Low GE-style plow Prime Manufacturing PM5191 HVAC unit Octagonal antenna dome and long STI-CO PTC Dual Track Antenna System with Radome covers Graham-White 994-500 Series Air Dryer Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights** LED-illuminated high-mount cab number boards* Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Nose door with window Two-piece nose top grab irons Standard electrical cabinet access doors Battery cabinet access door without latch GE safety cab with “gull-wing” roof profile and four (4) side windows Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls In-cab grade crossing camera Tinted cab side windows Medium mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Octagonal antenna dome with small LinkUp International PTC antenna cabinets Electrical cabinet with drop grab irons on rear Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with tri-fold power assembly access doors Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, short, short Tall latched access door on long hood end High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on right front and left rear side frames Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Salem) 824-100 Centrifugal Air Filters 5,000-gallon fuel tank with vertical weld seams Dual fuel fills per side Round and vertical analog fuel gauges Fuel tank-mounted steel bell Separate air tanks with lower mounting brackets and connector pipe Early, square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC.

新商品! 到貨於 第1季 2026

• 與 DCC 解碼器
• 商品有聲音

Kansas City Southern/ex-BNSF Heritage II Patched New roadname Era: 2021 to Present Series 4420 to 4469; ex-BNSF 4772-4971, built 1998 KCS 4455 Low GE-style plow Prime Manufacturing PM5191 HVAC unit Octagonal antenna dome and long STI-CO PTC Dual Track Antenna System with Radome covers Graham-White 994-500 Series Air Dryer Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights** LED-illuminated high-mount cab number boards* Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Nose door with window Two-piece nose top grab irons Standard electrical cabinet access doors Battery cabinet access door without latch GE safety cab with “gull-wing” roof profile and four (4) side windows Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls In-cab grade crossing camera Tinted cab side windows Medium mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Octagonal antenna dome with small LinkUp International PTC antenna cabinets Electrical cabinet with drop grab irons on rear Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with tri-fold power assembly access doors Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, short, short Tall latched access door on long hood end High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on right front and left rear side frames Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Salem) 824-100 Centrifugal Air Filters 5,000-gallon fuel tank with vertical weld seams Dual fuel fills per side Round and vertical analog fuel gauges Fuel tank-mounted steel bell Separate air tanks with lower mounting brackets and connector pipe Early, square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC.

新商品! 到貨於 第1季 2026

• 與DCC的使用（DCC接口）

Kansas City Southern/ex-BNSF Heritage II Patched New roadname Era: 2021 to Present Series 4420 to 4469; ex-BNSF 4772-4971, built 1998 KCS 4455 Low GE-style plow Prime Manufacturing PM5191 HVAC unit Octagonal antenna dome and long STI-CO PTC Dual Track Antenna System with Radome covers Graham-White 994-500 Series Air Dryer Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights** LED-illuminated high-mount cab number boards* Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Nose door with window Two-piece nose top grab irons Standard electrical cabinet access doors Battery cabinet access door without latch GE safety cab with “gull-wing” roof profile and four (4) side windows Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls In-cab grade crossing camera Tinted cab side windows Medium mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Octagonal antenna dome with small LinkUp International PTC antenna cabinets Electrical cabinet with drop grab irons on rear Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with tri-fold power assembly access doors Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, short, short Tall latched access door on long hood end High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on right front and left rear side frames Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Salem) 824-100 Centrifugal Air Filters 5,000-gallon fuel tank with vertical weld seams Dual fuel fills per side Round and vertical analog fuel gauges Fuel tank-mounted steel bell Separate air tanks with lower mounting brackets and connector pipe Early, square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC.

新商品! 到貨於 第1季 2026

• 與 DCC 解碼器
• 商品有聲音

Genesee & Wyoming/Heritage Unit #1899 New roadname New road number Era: 2024 to Present GNWR Heritage Scheme; ex-BNSF 4923, built 1998 HypoTypical™ details include… Similar in-cab grade crossing camera as the prototype Prototype equipped with front and rear LED “cluster” headlights Prototype equipped with front and rear LED “cluster” ditch lights GE safety cab with “gull-wing” roof profile and four (4) side windows Fully-assembled No truck ground lights (prototype not equipped) Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights** LED-illuminated high-mount cab number boards* Low EMD-style notch-corner plow Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Nose door with window Two-piece nose top grab irons Standard electrical cabinet access doors Battery cabinet access door without latch Small louver panel retrofitted to right rear cab sub-base door Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls In-cab grade crossing camera Tinted cab side windows Medium mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Octagonal antenna dome and long Sti-Co PTC Dual Track Antenna System with Radome covers Electrical cabinet with drop grab irons on rear Prime Manufacturing PM5191 HVAC unit Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with tri-fold power assembly access doors Lost-wax brass cast Leslie RS-3L horn with debris covers mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, short grilles Tall latched access door on long hood end High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on right front and left rear side frames, and flange lubricator sticks Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Salem) 824-100 Centrifugal Air Filters Graham-White 994-500 Series Air Dryer 5,000-gallon fuel tank with vertical weld seams Dual fuel fills per side Round and vertical analog fuel gauges Fuel tank-mounted steel bell Separate air tanks with lower mounting brackets and connector pipe Early, square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC.

新商品! 到貨於 第1季 2026

• 與DCC的使用（DCC接口）

Genesee & Wyoming/Heritage Unit #1899 New roadname New road number Era: 2024 to Present GNWR Heritage Scheme; ex-BNSF 4923, built 1998 HypoTypical™ details include… Similar in-cab grade crossing camera as the prototype Prototype equipped with front and rear LED “cluster” headlights Prototype equipped with front and rear LED “cluster” ditch lights GE safety cab with “gull-wing” roof profile and four (4) side windows Fully-assembled No truck ground lights (prototype not equipped) Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights** LED-illuminated high-mount cab number boards* Low EMD-style notch-corner plow Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Nose door with window Two-piece nose top grab irons Standard electrical cabinet access doors Battery cabinet access door without latch Small louver panel retrofitted to right rear cab sub-base door Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls In-cab grade crossing camera Tinted cab side windows Medium mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Octagonal antenna dome and long Sti-Co PTC Dual Track Antenna System with Radome covers Electrical cabinet with drop grab irons on rear Prime Manufacturing PM5191 HVAC unit Continuous reinforcement rib under dynamic brake intake grilles Late dynamic brake exhaust Late angled engine cab profile with tri-fold power assembly access doors Lost-wax brass cast Leslie RS-3L horn with debris covers mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, short grilles Tall latched access door on long hood end High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on right front and left rear side frames, and flange lubricator sticks Rust-color painted wheelsets Rotating axle bearing caps No speed recorder Dual Graham-White (Salem) 824-100 Centrifugal Air Filters Graham-White 994-500 Series Air Dryer 5,000-gallon fuel tank with vertical weld seams Dual fuel fills per side Round and vertical analog fuel gauges Fuel tank-mounted steel bell Separate air tanks with lower mounting brackets and connector pipe Early, square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC.

新商品! 到貨於 第1季 2026

• 與 DCC 解碼器
• 商品有聲音

Canadian National/Teardrop Windshields/Red Marker Lights New road numbers Era: 2004 to Present Series 2200 to 2205, built 01-02/2004 Canadian “teardrop” front windshields and red front and rear LED-illuminated marker lights Walkway with sectional see-through grating, and ribbed anticlimbers, front and rear Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) Operating LED front, rear, and side walkway lights* Operating LED front and rear deck-mounted ditch lights with visors ** LED-illuminated high-mount cab number boards* Short snowplow with open doors and grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 4-step stepwells with see-through steps GE “nub” pattern walkway tread Wide profile end handrails Front nose headlight Nose door without window Two-piece nose top grab irons Standard electrical cabinet access doors Battery cabinet access door with latch Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand Tinted cab side windows Medium mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Large Sinclair “ice skate” communication antenna and three small Sinclair “ice skate” antennas Electrical cabinet with drop grab irons on rear No walkway HVAC unit installed Continuous reinforcement rib under dynamic brake intake grilles, with emergency stretcher compartment adjacent Late dynamic brake exhaust Late angled engine cab profile with raised “dot” treadplate on centerline Lost-wax brass cast Nathan AirChime K3LA horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles High-mounted rear sand fill Late angled lifting “tabs” on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on right front and left rear side frames, and flange lubricator sticks Rust-color painted wheelsets Rotating axle bearing caps Speed recorder on left side second axle Speed recorder on the second axle on both sides Dual Graham-White (Prime) 975-075 Air Filters Graham-White 975-100 “Twin Tower” Air Filter Dryer 5,000-gallon fuel tank with vertical weld seams Single fuel fills per side Digital fuel gauge Fuel tank-mounted steel bell Separate air tanks with lower mounting brackets and connector pipe Late handbrake chain brackets with dual pulleys Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC

新商品! 到貨於 第1季 2026

• 與 DCC 解碼器
• 商品有聲音

Canadian National/Teardrop Windshields/Red Marker Lights New road numbers Era: 2004 to Present Series 2200 to 2205, built 01-02/2004 Canadian “teardrop” front windshields and red front and rear LED-illuminated marker lights Walkway with sectional see-through grating, and ribbed anticlimbers, front and rear Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) Operating LED front, rear, and side walkway lights* Operating LED front and rear deck-mounted ditch lights with visors ** LED-illuminated high-mount cab number boards* Short snowplow with open doors and grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 4-step stepwells with see-through steps GE “nub” pattern walkway tread Wide profile end handrails Front nose headlight Nose door without window Two-piece nose top grab irons Standard electrical cabinet access doors Battery cabinet access door with latch Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand Tinted cab side windows Medium mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Large Sinclair “ice skate” communication antenna and three small Sinclair “ice skate” antennas Electrical cabinet with drop grab irons on rear No walkway HVAC unit installed Continuous reinforcement rib under dynamic brake intake grilles, with emergency stretcher compartment adjacent Late dynamic brake exhaust Late angled engine cab profile with raised “dot” treadplate on centerline Lost-wax brass cast Nathan AirChime K3LA horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually applied etched metal see-through radiator intake and exhaust grilles on the sides and top of the radiator compartment Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles High-mounted rear sand fill Late angled lifting “tabs” on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on right front and left rear side frames, and flange lubricator sticks Rust-color painted wheelsets Rotating axle bearing caps Speed recorder on left side second axle Speed recorder on the second axle on both sides Dual Graham-White (Prime) 975-075 Air Filters Graham-White 975-100 “Twin Tower” Air Filter Dryer 5,000-gallon fuel tank with vertical weld seams Single fuel fills per side Digital fuel gauge Fuel tank-mounted steel bell Separate air tanks with lower mounting brackets and connector pipe Late handbrake chain brackets with dual pulleys Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged GE 7FDL16 prime mover sounds ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC. *** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate **** Compatible with appropriately programmed ESU decoders while operating using DCC