新商品! 到貨於 二月 2027

• DCC接線準備
• 商品有聲音

All-new model Era: 2020 to present Series 5844 to 6043; built 10/05-7/06 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for capacitor box clearance, and right long rail with bolted head on 2nd lower stanchion Narrow profile end handrails Sand box clean out door with knuckle buster latch Front nose headlight Left nose door with window Front high-mounted (cab) numberboard housings Single cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof GE communications handler octagonal dome, dual short STI-CO PTC Dual Track Antenna System with Radome covers Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Right side dynamic brake cab: bolted X panel, small X panel, door with grille, and door with grille Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Capacitor box on left side walkway Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with single-piece narrow slot grille Heat Exchange access doors Early flush radiator grille Left side radiator cab grille arrangement: Flush doors. Grilles – high square, raised large rectangle, tall, short, tall, short front angled grill, two-piece rear angled grille, grille under brake wheel Right side radiator cab grille arrangement: Flush doors. Grilles – high square, raised large rectangle, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille No water fill box Low-mounted vertical rear headlight Rear narrow-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders, dual bracket air plumbing, and smooth section in sideframe over center axle Square handbrake chain bracket Toilet drain with interior handle Dual Graham-White (Salem) accordion 824 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

新商品! 到貨於 二月 2027

• 與DCC的使用（DCC接口）

All-new model Era: 2020 to present Series 5844 to 6043; built 10/05-7/06 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for capacitor box clearance, and right long rail with bolted head on 2nd lower stanchion Narrow profile end handrails Sand box clean out door with knuckle buster latch Front nose headlight Left nose door with window Front high-mounted (cab) numberboard housings Single cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof GE communications handler octagonal dome, dual short STI-CO PTC Dual Track Antenna System with Radome covers Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Right side dynamic brake cab: bolted X panel, small X panel, door with grille, and door with grille Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Capacitor box on left side walkway Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with single-piece narrow slot grille Heat Exchange access doors Early flush radiator grille Left side radiator cab grille arrangement: Flush doors. Grilles – high square, raised large rectangle, tall, short, tall, short front angled grill, two-piece rear angled grille, grille under brake wheel Right side radiator cab grille arrangement: Flush doors. Grilles – high square, raised large rectangle, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille No water fill box Low-mounted vertical rear headlight Rear narrow-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders, dual bracket air plumbing, and smooth section in sideframe over center axle Square handbrake chain bracket Toilet drain with interior handle Dual Graham-White (Salem) accordion 824 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

新商品! 到貨於 二月 2027

• DCC接線準備
• 商品有聲音

All-new model Era: 2020 to present Series 5844 to 6043; built 10/05-7/06 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for capacitor box clearance, and right long rail with bolted head on 2nd lower stanchion Narrow profile end handrails Sand box clean out door with knuckle buster latch Front nose headlight Left nose door with window Front high-mounted (cab) numberboard housings Single cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof GE communications handler octagonal dome, dual short STI-CO PTC Dual Track Antenna System with Radome covers Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Right side dynamic brake cab: bolted X panel, small X panel, door with grille, and door with grille Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Capacitor box on left side walkway Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with single-piece narrow slot grille Heat Exchange access doors Early flush radiator grille Left side radiator cab grille arrangement: Flush doors. Grilles – high square, raised large rectangle, tall, short, tall, short front angled grill, two-piece rear angled grille, grille under brake wheel Right side radiator cab grille arrangement: Flush doors. Grilles – high square, raised large rectangle, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille No water fill box Low-mounted vertical rear headlight Rear narrow-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders, dual bracket air plumbing, and smooth section in sideframe over center axle Square handbrake chain bracket Toilet drain with interior handle Dual Graham-White (Salem) accordion 824 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

新商品! 到貨於 二月 2027

• 與DCC的使用（DCC接口）

All-new model Era: 2020 to present Series 5844 to 6043; built 10/05-7/06 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for capacitor box clearance, and right long rail with bolted head on 2nd lower stanchion Narrow profile end handrails Sand box clean out door with knuckle buster latch Front nose headlight Left nose door with window Front high-mounted (cab) numberboard housings Single cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof GE communications handler octagonal dome, dual short STI-CO PTC Dual Track Antenna System with Radome covers Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Right side dynamic brake cab: bolted X panel, small X panel, door with grille, and door with grille Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Capacitor box on left side walkway Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with single-piece narrow slot grille Heat Exchange access doors Early flush radiator grille Left side radiator cab grille arrangement: Flush doors. Grilles – high square, raised large rectangle, tall, short, tall, short front angled grill, two-piece rear angled grille, grille under brake wheel Right side radiator cab grille arrangement: Flush doors. Grilles – high square, raised large rectangle, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille No water fill box Low-mounted vertical rear headlight Rear narrow-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders, dual bracket air plumbing, and smooth section in sideframe over center axle Square handbrake chain bracket Toilet drain with interior handle Dual Graham-White (Salem) accordion 824 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

新商品! 到貨於 二月 2027

• DCC接線準備
• 商品有聲音

All-new model Era: 2023 to present Road number 1827 Special Baltimore and Ohio Heritage scheme Series 3000 to 3064; built 4-6/12 Formerly CSX 3059 Inverter Cabinet with Bolted and hinged access door, Front Top X Panel Wider Than Rear X Panel, three lower X panels with 4 - 6 - 4 Bolt Pattern Lower X Panels Lost wax brass cast Nathan K5HLR2 Horn w/"Shower Caps" horn mounted on engine cab roof Retrofitted late ET44 style exhaust stack, no flange or center support on stack Fully-assembled LED-illuminated front deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Sill-mounted tow chain Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome, and dual long STI-CO PTC Dual Track Antenna System without Radome covers Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille Dynamic brake cab door with high door handle and high-mounted door handle bumper Long right side air intake grille Left side auxiliary cab: 3 tall doors with latches on the #2 door and no auxiliary cab filter box door Right side auxiliary cab: raised X panel door; 3 doors with latches on #2 and #3 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Low-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling Late GE steerable trucks with separately applied brake cylinders, air plumbing, and reinforcement bar under center journal Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

新商品! 到貨於 二月 2027

• 與DCC的使用（DCC接口）

All-new model Era: 2023 to present Road number 1827 Special Baltimore and Ohio Heritage scheme Series 3000 to 3064; built 4-6/12 Formerly CSX 3059 Inverter Cabinet with Bolted and hinged access door, Front Top X Panel Wider Than Rear X Panel, three lower X panels with 4 - 6 - 4 Bolt Pattern Lower X Panels Lost wax brass cast Nathan K5HLR2 Horn w/"Shower Caps" horn mounted on engine cab roof Retrofitted late ET44 style exhaust stack, no flange or center support on stack Fully-assembled LED-illuminated front deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Sill-mounted tow chain Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome, and dual long STI-CO PTC Dual Track Antenna System without Radome covers Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille Dynamic brake cab door with high door handle and high-mounted door handle bumper Long right side air intake grille Left side auxiliary cab: 3 tall doors with latches on the #2 door and no auxiliary cab filter box door Right side auxiliary cab: raised X panel door; 3 doors with latches on #2 and #3 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Low-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling Late GE steerable trucks with separately applied brake cylinders, air plumbing, and reinforcement bar under center journal Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

新商品! 到貨於 二月 2027

• DCC接線準備
• 商品有聲音

All-new model Era: 2023 to present Road number 1973 Special Chessie System Heritage scheme Series 3000 to 3064; built 4-6/12 Formerly CSX 3049 Inverter Cabinet with Bolted and hinged access door, Front Top X Panel Wider Than Rear X Panel, three lower X panels with 4 - 6 - 4 Bolt Pattern Lower X Panels Lost wax brass cast Nathan K5HLR2 Horn w/"Shower Caps" horn mounted on engine cab roof Retrofitted late ET44 style exhaust stack, no flange or center support on stack Fully-assembled LED-illuminated front deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible Sill-mounted tow chain Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome, and dual long STI-CO PTC Dual Track Antenna System without Radome covers Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille Dynamic brake cab door with high door handle and high-mounted door handle bumper Long right side air intake grille Left side auxiliary cab: 3 tall doors with latches on the #2 door and no auxiliary cab filter box door Right side auxiliary cab: raised X panel door; 3 doors with latches on #2 and #3 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille, and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Low-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling Late GE steerable trucks with separately applied brake cylinders, air plumbing, and reinforcement bar under center journal Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

新商品! 到貨於 二月 2027

• 與DCC的使用（DCC接口）

All-new model Era: 2023 to present Road number 1973 Special Chessie System Heritage scheme Series 3000 to 3064; built 4-6/12 Formerly CSX 3049 Inverter Cabinet with Bolted and hinged access door, Front Top X Panel Wider Than Rear X Panel, three lower X panels with 4 - 6 - 4 Bolt Pattern Lower X Panels Lost wax brass cast Nathan K5HLR2 Horn w/"Shower Caps" horn mounted on engine cab roof Retrofitted late ET44 style exhaust stack, no flange or center support on stack Fully-assembled LED-illuminated front deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible Sill-mounted tow chain Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome, and dual long STI-CO PTC Dual Track Antenna System without Radome covers Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille Dynamic brake cab door with high door handle and high-mounted door handle bumper Long right side air intake grille Left side auxiliary cab: 3 tall doors with latches on the #2 door and no auxiliary cab filter box door Right side auxiliary cab: raised X panel door; 3 doors with latches on #2 and #3 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille, and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Low-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling Late GE steerable trucks with separately applied brake cylinders, air plumbing, and reinforcement bar under center journal Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

新商品! 到貨於 二月 2027

• DCC接線準備
• 商品有聲音

All-new model Era: 2023 to present Road number 1982 Special Seaboard System Heritage scheme Series 3065 to 3174; built 2-11/13 Formerly CSX 3066 Inverter Cabinet with Bolted and hinged access door, both top X panels wider, three lower X panels with 5 - 5 - 5 Bolt Pattern Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof, trumpets arranged in non-standard configuration As delivered ES44 style exhaust stack with large flange and center support Fully-assembled LED-illuminated front deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Sill-mounted tow chain Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome, and dual long STI-CO PTC Dual Track Antenna System without Radome covers Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille Dynamic brake cab door with high door handle and high-mounted door handle bumper Long right side air intake grille Left side auxiliary cab: 3 tall doors with latches on the #2 door and no auxiliary cab filter box door Right side auxiliary cab: raised X panel door; 3 doors with latches on #2 and #3 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille, and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Low-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling Late GE steerable trucks with separately applied brake cylinders, air plumbing, and reinforcement bar under center journal Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

新商品! 到貨於 二月 2027

• 與DCC的使用（DCC接口）

All-new model Era: 2023 to present Road number 1982 Special Seaboard System Heritage scheme Series 3065 to 3174; built 2-11/13 Formerly CSX 3066 Inverter Cabinet with Bolted and hinged access door, both top X panels wider, three lower X panels with 5 - 5 - 5 Bolt Pattern Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof, trumpets arranged in non-standard configuration As delivered ES44 style exhaust stack with large flange and center support Fully-assembled LED-illuminated front deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Sill-mounted tow chain Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome, and dual long STI-CO PTC Dual Track Antenna System without Radome covers Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille Dynamic brake cab door with high door handle and high-mounted door handle bumper Long right side air intake grille Left side auxiliary cab: 3 tall doors with latches on the #2 door and no auxiliary cab filter box door Right side auxiliary cab: raised X panel door; 3 doors with latches on #2 and #3 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille, and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Low-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling Late GE steerable trucks with separately applied brake cylinders, air plumbing, and reinforcement bar under center journal Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

新商品! 到貨於 二月 2027

• DCC接線準備
• 商品有聲音

All-new model Era: 2023 to present Road number 1976 Special Conrail Heritage scheme Series 3065 to 3174; built 2-11/13 Formerly CSX 3069 Inverter Cabinet with Bolted and hinged access door, both top X panels wider, three lower X panels with 5 - 5 - 5 Bolt Pattern Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof, trumpets arranged in non-standard configuration Retrofitted late ET44 style exhaust stack, no flange or center support on stack Fully-assembled LED-illuminated front deck-mounted alternating ditch lights** Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Sill-mounted tow chain Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome, and dual long STI-CO PTC Dual Track Antenna System without Radome covers Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille Dynamic brake cab door with high door handle and high-mounted door handle bumper Long right side air intake grille Left side auxiliary cab: 3 tall doors with latches on the #2 door and no auxiliary cab filter box door Right side auxiliary cab: raised X panel door; 3 doors with latches on #2 and #3 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Low-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling Late GE steerable trucks with separately applied brake cylinders, air plumbing, and reinforcement bar under center journal Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

新商品! 到貨於 二月 2027

• 與DCC的使用（DCC接口）

All-new model Era: 2023 to present Road number 1976 Special Conrail Heritage scheme Series 3065 to 3174; built 2-11/13 Formerly CSX 3069 Inverter Cabinet with Bolted and hinged access door, both top X panels wider, three lower X panels with 5 - 5 - 5 Bolt Pattern Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof, trumpets arranged in non-standard configuration Retrofitted late ET44 style exhaust stack, no flange or center support on stack Fully-assembled LED-illuminated front deck-mounted alternating ditch lights** Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Sill-mounted tow chain Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome, and dual long STI-CO PTC Dual Track Antenna System without Radome covers Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille Dynamic brake cab door with high door handle and high-mounted door handle bumper Long right side air intake grille Left side auxiliary cab: 3 tall doors with latches on the #2 door and no auxiliary cab filter box door Right side auxiliary cab: raised X panel door; 3 doors with latches on #2 and #3 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Low-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling Late GE steerable trucks with separately applied brake cylinders, air plumbing, and reinforcement bar under center journal Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

新商品! 到貨於 二月 2027

• DCC接線準備
• 商品有聲音

All-new model Era: 2023 to present Road number 1869 Special Chesapeake and Ohio Heritage scheme Series 3000 to 3064; built 4-6/12 Formerly CSX 3061 Inverter Cabinet with Bolted and hinged access door, Front Top X Panel Wider Than Rear X Panel, three lower X panels with 4 - 6 - 4 Bolt Pattern Lower X Panels Lost wax brass cast Nathan K5HLR2 Horn w/"Shower Caps" horn mounted on engine cab roof Retrofitted late ET44 style exhaust stack, no flange or center support on stack Fully-assembled LED-illuminated front deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Sill-mounted tow chain Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome, and dual long STI-CO PTC Dual Track Antenna System without Radome covers Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille Dynamic brake cab door with high door handle and high-mounted door handle bumper Long right side air intake grille Left side auxiliary cab: 3 tall doors with latches on the #2 door and no auxiliary cab filter box door Right side auxiliary cab: raised X panel door; 3 doors with latches on #2 and #3 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille, and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Low-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling Late GE steerable trucks with separately applied brake cylinders, air plumbing, and reinforcement bar under center journal Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

新商品! 到貨於 二月 2027

• 與DCC的使用（DCC接口）

All-new model Era: 2023 to present Road number 1869 Special Chesapeake and Ohio Heritage scheme Series 3000 to 3064; built 4-6/12 Formerly CSX 3061 Inverter Cabinet with Bolted and hinged access door, Front Top X Panel Wider Than Rear X Panel, three lower X panels with 4 - 6 - 4 Bolt Pattern Lower X Panels Lost wax brass cast Nathan K5HLR2 Horn w/"Shower Caps" horn mounted on engine cab roof Retrofitted late ET44 style exhaust stack, no flange or center support on stack Fully-assembled LED-illuminated front deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Sill-mounted tow chain Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome, and dual long STI-CO PTC Dual Track Antenna System without Radome covers Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille Dynamic brake cab door with high door handle and high-mounted door handle bumper Long right side air intake grille Left side auxiliary cab: 3 tall doors with latches on the #2 door and no auxiliary cab filter box door Right side auxiliary cab: raised X panel door; 3 doors with latches on #2 and #3 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille, and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Low-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling Late GE steerable trucks with separately applied brake cylinders, air plumbing, and reinforcement bar under center journal Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

新商品! 到貨於 二月 2027

• DCC接線準備
• 商品有聲音

All-new model Era: 2012 to present Series 3000 to 3064; built 4-6/12 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Sill-mounted tow chain Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome, two long STI-CO PTC Dual Track Antenna System without Radome covers Inverter Cabinet with Bolted and hinged access door, Front Top X Panel Wider Than Rear X Panel, three lower X panels with 4 - 6 - 4 Bolt Pattern Lower X Panels Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille Dynamic brake cab door with high door handle and high-mounted door handle bumper Long right side air intake grille Left side auxiliary cab: 3 tall doors with latches on the #2 door and no auxiliary cab filter box door Right side auxiliary cab: raised X panel door; 3 doors with latches on #2 and #3 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille, and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling Late GE steerable trucks with separately applied brake cylinders, air plumbing, and reinforcement bar under center journal Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

新商品! 到貨於 二月 2027

• 與DCC的使用（DCC接口）

All-new model Era: 2012 to present Series 3000 to 3064; built 4-6/12 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Sill-mounted tow chain Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome, two long STI-CO PTC Dual Track Antenna System without Radome covers Inverter Cabinet with Bolted and hinged access door, Front Top X Panel Wider Than Rear X Panel, three lower X panels with 4 - 6 - 4 Bolt Pattern Lower X Panels Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille Dynamic brake cab door with high door handle and high-mounted door handle bumper Long right side air intake grille Left side auxiliary cab: 3 tall doors with latches on the #2 door and no auxiliary cab filter box door Right side auxiliary cab: raised X panel door; 3 doors with latches on #2 and #3 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille, and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling Late GE steerable trucks with separately applied brake cylinders, air plumbing, and reinforcement bar under center journal Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

新商品! 到貨於 二月 2027

• DCC接線準備
• 商品有聲音

All-new model Era: 2012 to present Series 3000 to 3064; built 4-6/12 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Sill-mounted tow chain Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome, two long STI-CO PTC Dual Track Antenna System without Radome covers Inverter Cabinet with Bolted and hinged access door, Front Top X Panel Wider Than Rear X Panel, three lower X panels with 4 - 6 - 4 Bolt Pattern Lower X Panels Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille Dynamic brake cab door with high door handle and high-mounted door handle bumper Long right side air intake grille Left side auxiliary cab: 3 tall doors with latches on the #2 door and no auxiliary cab filter box door Right side auxiliary cab: raised X panel door; 3 doors with latches on #2 and #3 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille, and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling Late GE steerable trucks with separately applied brake cylinders, air plumbing, and reinforcement bar under center journal Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

新商品! 到貨於 二月 2027

• 與DCC的使用（DCC接口）

All-new model Era: 2012 to present Series 3000 to 3064; built 4-6/12 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Sill-mounted tow chain Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome, two long STI-CO PTC Dual Track Antenna System without Radome covers Inverter Cabinet with Bolted and hinged access door, Front Top X Panel Wider Than Rear X Panel, three lower X panels with 4 - 6 - 4 Bolt Pattern Lower X Panels Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille Dynamic brake cab door with high door handle and high-mounted door handle bumper Long right side air intake grille Left side auxiliary cab: 3 tall doors with latches on the #2 door and no auxiliary cab filter box door Right side auxiliary cab: raised X panel door; 3 doors with latches on #2 and #3 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille, and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling Late GE steerable trucks with separately applied brake cylinders, air plumbing, and reinforcement bar under center journal Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

新商品! 到貨於 二月 2027

• DCC接線準備
• 商品有聲音

All-new model Era: 2024 to present Series 800 to 823; built 10-12/14 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Narrow profile end handrails Sand box clean out door with knuckle buster latch Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome, single short STI-CO PTC antenna with Radome cover, and dual Sinclair dome antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Left side dynamic brake cab: late single blower dynamic brake package with dual stand-off exhaust, two small center grilles, and latched center door Right side dynamic brake cab: X panel door, small grille, door with grille, and X panel door Dynamic brake cab door with high door handle and high-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 medium doors with latches on the #2 door and wide auxiliary cab filter box door Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ET44 style engine cab doors: latched center door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched center door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille, and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Rear narrow-spaced dual dummy Multiple Unit (MU) receptacles “C4” A-1-A trucks with idler center axle Prototype equipped with a weight management system for optimum adhesion control Separately applied details include additional truck side frame cylinders, air piping, cam details, and control boxes mounted on sidesills Square handbrake chain bracket Toilet drain with interior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

新商品! 到貨於 二月 2027

• 與DCC的使用（DCC接口）

All-new model Era: 2024 to present Series 800 to 823; built 10-12/14 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Narrow profile end handrails Sand box clean out door with knuckle buster latch Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Front high-mounted (cab) numberboard housings Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome, single short STI-CO PTC antenna with Radome cover, and dual Sinclair dome antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Left side dynamic brake cab: late single blower dynamic brake package with dual stand-off exhaust, two small center grilles, and latched center door Right side dynamic brake cab: X panel door, small grille, door with grille, and X panel door Dynamic brake cab door with high door handle and high-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 medium doors with latches on the #2 door and wide auxiliary cab filter box door Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ET44 style engine cab doors: latched center door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched center door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille, and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Rear narrow-spaced dual dummy Multiple Unit (MU) receptacles “C4” A-1-A trucks with idler center axle Prototype equipped with a weight management system for optimum adhesion control Separately applied details include additional truck side frame cylinders, air piping, cam details, and control boxes mounted on sidesills Square handbrake chain bracket Toilet drain with interior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector