新商品! 到貨於 十二月 2026

• 與 DCC 解碼器
• 商品有聲音

Museum Qualität, noch mehr Details und Funktionen Das Set besteht aus A-Unit, B-Unit und Tender Alle Achsen angetrieben, Stromaufnahme über alle Achsen, LED Beleuchtung, Inneneinrichtung ESU LokSound + DCC Decoder Road Number Specific ScaleTrains Era: 1965 to 1970 Series 16 to 30, built June 1960 to June 1961 3-unit set: “A”, “B”, and Fuel Tender Premium leather-like presentation case with metal latches for safe storage Fully-assembled Multiple road numbers Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Minimum radius: 18” without water and electrical bus connections and tender truck safety chain detail attached Recommended radius: 22” “A” Control Unit Operating LED tricolor (red, green, and white) class lights** Operating LED cab interior light Operating LED control panel light Operating LED ground light on engineer’s side Operating LED rear walkway light Printed and LED-lighted number boards Durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service With nose side grab irons Opening cab doors with separate door handles Detailed cab interior with separate control stand, floor, rear wall with water cooler, and seats Radiator-mounted mounted lost wax brass cast Leslie S-5T-R air horn mounted on clearance bracket Cab roof heater box with grille on right side only Large see-through photo-etched metal side grilles H – I dynamic brake housing with etched-metal grilles With air intake scoops Modified radiator with all-weather shutter Underbody frame rail with traction motor cable detail As delivered 2,500-gallon diesel fuel tank with extended retrofit Two air tanks with separate plumbing Rubber Multiple Unit (MU) and electrical bus connections between the “A” and “B” units Rubber water hoses between the “A” and “B” unit Factory-applied ladders, wire grab irons, coupler cut levers, windshield wipers, mirrors, trainline hoses with silver glad hands, lifting lugs, exhaust stack, bell, and sanding lines Highly detailed trucks with separately applied brake cylinders, air pipes, and lost wax brass cast wheel slip indicators on left side frames Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Mixed SKF and Timken bearings Chicago Pneumatic speed recorder mounted on right side second axle Motor with 5-pole skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pickup Directional LED headlight DCC & sound-equipped locomotives feature: Operates on both DC and DCC layouts ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Single ESU-designed speaker housing with built-in passive radiator Prime mover sound Curve squeal sound Frog clank sound Large speaker ESU-designed “PowerPack” with two super capacitors*** DC/DCC & sound-ready locomotives feature: Operable using a DC power pack DCC-ready with 21-pin connector “B” Turbine Unit Operating LED back-up light Sliding engine compartment side doors Detailed interior with turbine visible inside Spinning turbine fan blade visible inside exhaust Farr Dynavane inertial-type air intake housing I – I dynamic brake housing with etched-metal grilles Offset air intake scoops Blanked door panels and forward ventilation louvers Factory-applied ladders, wire grab irons, coupler cut levers, trainline hose, lifting lugs, and sanding lines Underbody frame rail Highly detailed trucks with separately applied brake cylinders, air pipes, and lost wax brass wheel slip indicators on left side frames Mixed SKF and Timken bearings Motor with 5-pole skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pickup DCC & sound-equipped locomotives feature: Operates on both DC and DCC layouts ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Single ESU-designed speaker housing with built-in passive radiator Turbine sound Curve squeal sound Frog clank sound Large speaker ESU-designed “PowerPack” with two super capacitors*** DC/DCC & sound-ready locomotives feature: Operable using a DC power pack DCC-ready with 21-pin connector 24C Fuel Tender 24,000-gallon capacity Welded seams Insulated body Commonwealth 6-axle trucks Truck chains Factory-applied air tank, brake cylinder, and control valve Factory-applied multiple unit (MU) hoses with silver gladhands Photo-etched metal tender deck walkway Operating LED rear tender light

商品重量: 2,200 kg

Angaben zur Produktsicherheit:
Hersteller: Scale Trains, 4901 Old Tasso Road NE Cleveland, TN 37312, USA, www.scaletrains.com
Verantwortlicher Importeur: RD-Hobby Modellbahnen, Jaegersburger Str. 17,68649 Gross-Rohrheim, Deutschland, email@RD-Hobby.de