• mit DCC Motordekoder
• mit Sound

Era: 2017 to Present Series 4043 to 4074, rebuilt 9/17 Road numbers 4071; ex-NS 8824 Horsehead scheme with DC to AC sinewave logo Rebuilt by NS Juniata Shops in Altoona, PA Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front and rear deck-mounted alternating ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed cab-mounted number boards with separately controlled LED-illumination* Directional LED-illuminated headlights LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall snowplow with MU hose openings and two (2) grab irons Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Inside loop uncoupling levers with down brackets 4-step rear stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door without window; security padlock with hasp Two-piece nose top grab irons Battery cabinet access door with latch GE safety cab with four (4) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: bolted panel forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Tall mirror mounted fore and aft of sliding cab side windows on left side, Tall mirror mounted fore of sliding cab side windows on right side; additional small mirror on right side JEM Communications PTC antenna farm with Sinclair antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and wide auxiliary cab filter box door Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Dual triangular lifting bails on top of clean air cab joint Early curved engine cab profile High mounted lift rings on engine cab power assembly doors Three left side door latches and two right door latches on exhaust cab doors Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Early flanged exhaust stack housing “Bathtub” exhaust silencer 22 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Right side radiator wing access door with two “T” handles and bolt detail around the door Electronic Handbrake with panel in front of the brake wheel Flat stamped Left rear hood door grille arrangement: tall, short, short grilles High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Left side long rail all stanchions early type Right side long rail all stanchions early type Accurately profiled frame with separately-applied plumbing and traction motor cabling GE Hi-Ad trucks with reinforcement plate over center axle on right front and left rear side frames and separately applied brake cylinders, single bracket air plumbing, and rotating bearing caps Rust-color painted wheelsets No speed recorder Dual Graham-White (Salem) 824-100 centrifugal air filters Wabtec 994-500 series air dryer 5,000-gallon fuel tank with vertical wide spaced weld seams Fuel tank detail arrangement (front to back) right side – Fuel filler, EFCO, Digital Fuel Gauge Fuel tank mounted steel bell Separate air tanks with upper mounting brackets Curved handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Functions Two (2) cube-type speakers Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

• DCC vorbereitet (Schnittstelle vorhanden)

ra: 2017 to 2018 Series 4043 to 4073, rebuilt 7/17 Road number 4047; ex-NS 8781 Partial Horsehead paint scheme with primer-painted replacement cab Rebuilt by NS Roanoke Shops Fully re-painted at NS Juniata Shops in 11/18 Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front and rear deck-mounted alternating ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed cab-mounted number boards with separately controlled LED-illumination* Directional LED-illuminated headlights LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall snowplow with MU hose openings and two (2) grab irons Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Inside loop uncoupling levers with down brackets 4-step rear stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door without window; security padlock with hasp Two-piece nose top grab irons Battery cabinet access door with latch GE safety cab with four (4) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: bolted panel forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Tall mirror mounted fore and aft of sliding cab side windows on left side, Tall mirror mounted fore of sliding cab side windows on right side; additional small mirror on right side JEM Communications PTC antenna farm with Sinclair antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Dual triangular lifting bails on top of clean air cab joint Early curved engine cab profile High mounted lift ring on left rear engine cab power assembly door Three left side door latches and two right door latches on exhaust cab doors Lost-wax brass cast Nathan AirChime K5LAR24 horn (all chimes forward) mounted on engine cab Early flanged exhaust stack housing “Bathtub” exhaust silencer 22 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Right side radiator wing access door with looped center latch and no bolt detail on Panel surrounding the door Electronic Handbrake with panel to the rear of the brake wheel Concave stamped brakewheel with center hub Left rear hood door grille arrangement: tall, short, short grilles High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Left side long rail all stanchions early type Right side long rail all stanchions early type Accurately profiled frame with separately-applied plumbing and traction motor cabling GE Hi-Ad trucks with reinforcement plate over center axle on right front and left rear side frames and separately applied brake cylinders, single bracket air plumbing, and rotating bearing caps Rust-color painted wheelsets No speed recorder Dual Graham-White (Salem) 824-100 centrifugal air filters Wabtec AirSmart 994-600 series air dryer 5,000-gallon fuel tank with vertical wide spaced weld seams Fuel tank detail arrangement (front to back) right side – Fuel filler, EFCO, Digital Fuel Gauge Fuel tank mounted steel bell Separate air tanks with upper mounting brackets Curved handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound ready locomotives also feature: Operate on DC layouts DCC ready with 21-pin connector

• mit DCC Motordekoder
• mit Sound

ra: 2017 to 2018 Series 4043 to 4073, rebuilt 7/17 Road number 4047; ex-NS 8781 Partial Horsehead paint scheme with primer-painted replacement cab Rebuilt by NS Roanoke Shops Fully re-painted at NS Juniata Shops in 11/18 Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front and rear deck-mounted alternating ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed cab-mounted number boards with separately controlled LED-illumination* Directional LED-illuminated headlights LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall snowplow with MU hose openings and two (2) grab irons Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Inside loop uncoupling levers with down brackets 4-step rear stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door without window; security padlock with hasp Two-piece nose top grab irons Battery cabinet access door with latch GE safety cab with four (4) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: bolted panel forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Tall mirror mounted fore and aft of sliding cab side windows on left side, Tall mirror mounted fore of sliding cab side windows on right side; additional small mirror on right side JEM Communications PTC antenna farm with Sinclair antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Dual triangular lifting bails on top of clean air cab joint Early curved engine cab profile High mounted lift ring on left rear engine cab power assembly door Three left side door latches and two right door latches on exhaust cab doors Lost-wax brass cast Nathan AirChime K5LAR24 horn (all chimes forward) mounted on engine cab Early flanged exhaust stack housing “Bathtub” exhaust silencer 22 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Right side radiator wing access door with looped center latch and no bolt detail on Panel surrounding the door Electronic Handbrake with panel to the rear of the brake wheel Concave stamped brakewheel with center hub Left rear hood door grille arrangement: tall, short, short grilles High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Left side long rail all stanchions early type Right side long rail all stanchions early type Accurately profiled frame with separately-applied plumbing and traction motor cabling GE Hi-Ad trucks with reinforcement plate over center axle on right front and left rear side frames and separately applied brake cylinders, single bracket air plumbing, and rotating bearing caps Rust-color painted wheelsets No speed recorder Dual Graham-White (Salem) 824-100 centrifugal air filters Wabtec AirSmart 994-600 series air dryer 5,000-gallon fuel tank with vertical wide spaced weld seams Fuel tank detail arrangement (front to back) right side – Fuel filler, EFCO, Digital Fuel Gauge Fuel tank mounted steel bell Separate air tanks with upper mounting brackets Curved handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Functions Two (2) cube-type speakers Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

• mit DCC Motordekoder
• mit Sound

All-new model Era: 2016 to Present Series 4000 to 4005, rebuilt 8/16 Road number 4004; ex-NS 8866 C40-9 Special black cab and gray carbody scheme with blue stripe mane Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front and rear deck-mounted alternating ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed cab-mounted number boards with separately controlled LED-illumination* Directional LED-illuminated headlights LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall snowplow with MU hose openings and two (2) grab irons Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Inside loop uncoupling levers with down brackets 4-step rear stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door without window; security padlock with hasp Two-piece nose top grab irons Battery cabinet access door with latch GE safety cab with four (4) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: bolted panel forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Tall mirror mounted fore and aft of sliding cab side windows on left side, Tall mirror mounted fore of sliding cab side windows on right side; additional small mirror on right side JEM Communications PTC antenna farm with Sinclair antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors No lifting equipment for clean air cab joint Early curved engine cab profile No lift rings on engine cab power assembly door Three left side door latches and two right door latches on exhaust cab doors Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Early flanged exhaust stack housing “Bathtub” exhaust silencer 22 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Right side radiator wing access door with two “T” handles and bolt detail around the door Electronic Handbrake with panel in front of the brake wheel Convex stamped brakewheel Left rear hood door grille arrangement: tall, short, short grilles High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Left side long rail all stanchions early type Right side long rail all stanchions early type Accurately profiled frame with separately-applied plumbing and traction motor cabling GE Hi-Ad trucks with reinforcement plate over center axle on right front and left rear side frames and separately applied brake cylinders, single bracket air plumbing, and rotating bearing caps Rust-color painted wheelsets No speed recorder Dual Graham-White (Salem) 824-100 centrifugal air filters Wabtec 994-500 series air dryer 5,000-gallon fuel tank with vertical wide spaced weld seams Fuel tank detail arrangement (front to back) right side - Fuel Filer, Digital Fuel Gauge, EFCO Fuel tank mounted steel bell Separate air tanks with upper mounting brackets Curved handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Functions Two (2) cube-type speakers Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

• DCC vorbereitet (Schnittstelle vorhanden)

All-new model Era: 2016 to Present Series 4000 to 4005, rebuilt 8/16 Road number 4004; ex-NS 8866 C40-9 Special black cab and gray carbody scheme with blue stripe mane Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front and rear deck-mounted alternating ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed cab-mounted number boards with separately controlled LED-illumination* Directional LED-illuminated headlights LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall snowplow with MU hose openings and two (2) grab irons Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Inside loop uncoupling levers with down brackets 4-step rear stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door without window; security padlock with hasp Two-piece nose top grab irons Battery cabinet access door with latch GE safety cab with four (4) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: bolted panel forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Tall mirror mounted fore and aft of sliding cab side windows on left side, Tall mirror mounted fore of sliding cab side windows on right side; additional small mirror on right side JEM Communications PTC antenna farm with Sinclair antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors No lifting equipment for clean air cab joint Early curved engine cab profile No lift rings on engine cab power assembly door Three left side door latches and two right door latches on exhaust cab doors Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Early flanged exhaust stack housing “Bathtub” exhaust silencer 22 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Right side radiator wing access door with two “T” handles and bolt detail around the door Electronic Handbrake with panel in front of the brake wheel Convex stamped brakewheel Left rear hood door grille arrangement: tall, short, short grilles High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Left side long rail all stanchions early type Right side long rail all stanchions early type Accurately profiled frame with separately-applied plumbing and traction motor cabling GE Hi-Ad trucks with reinforcement plate over center axle on right front and left rear side frames and separately applied brake cylinders, single bracket air plumbing, and rotating bearing caps Rust-color painted wheelsets No speed recorder Dual Graham-White (Salem) 824-100 centrifugal air filters Wabtec 994-500 series air dryer 5,000-gallon fuel tank with vertical wide spaced weld seams Fuel tank detail arrangement (front to back) right side - Fuel Filer, Digital Fuel Gauge, EFCO Fuel tank mounted steel bell Separate air tanks with upper mounting brackets Curved handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound ready locomotives also feature: Operate on DC layouts DCC ready with 21-pin connector

• DCC vorbereitet (Schnittstelle vorhanden)

Era: 2016 to present Series 4000 to 4005, rebuilt 8/16 Road number 4002; ex-NS 8789 C40-9 Rebuilt by NS Roanoke Shops in Roanoke, VA Black cab with maroon mane stripe and gray carbody scheme Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front and rear deck-mounted alternating ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed cab-mounted number boards with separately controlled LED-illumination* Directional LED-illuminated headlights LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall snowplow with MU hose openings and two (2) grab irons Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Inside loop uncoupling levers with down brackets 4-step rear stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door without window; security padlock with hasp Two-piece nose top grab irons Battery cabinet access door with latch GE safety cab with four (4) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: bolted panel forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Tall mirror mounted fore and aft of sliding cab side windows on left side, Tall mirror mounted fore of sliding cab side windows on right side; additional small mirror on right side JEM Communications PTC antenna farm with Sinclair antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Dual lifting lugs mounted to sides of clean air cab joint Early curved engine cab profile High mounted lift rings on engine cab power assembly doors Four door latches per side on exhaust cab doors Lost-wax brass cast Nathan AirChime P5 (P5R24 configuration) horn mounted on engine cab Early flanged exhaust stack housing “Bathtub” exhaust silencer 22 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Right side radiator wing access door with looped center latch and no bolt detail on Panel surrounding the door Electronic Handbrake with panel to the rear of the brake wheel Convex stamped brakewheel Left rear hood door grille arrangement: tall, short, short grilles High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Left side long rail all stanchions early type Right side long rail all stanchions early type Accurately profiled frame with separately-applied plumbing and traction motor cabling GE Hi-Ad trucks with reinforcement plate over center axle on right front and left rear side frames and separately applied brake cylinders, slngle bracket air plumbing, and rotating bearing caps Rust-color painted wheelsets No speed recorder Dual Graham-White (Salem) 824-100 centrifugal air filters Wabtec 994-500 series air dryer 5,000-gallon fuel tank with vertical wide spaced weld seams Fuel tank detail arrangement (front to back) right side – Fuel filler, EFCO, Digital Fuel Gauge Fuel tank mounted steel bell Separate air tanks with upper mounting brackets Curved handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound ready locomotives also feature: Operate on DC layouts DCC ready with 21-pin connector

• mit DCC Motordekoder
• mit Sound

Era: 2016 to present Series 4000 to 4005, rebuilt 8/16 Road number 4002; ex-NS 8789 C40-9 Rebuilt by NS Roanoke Shops in Roanoke, VA Black cab with maroon mane stripe and gray carbody scheme Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front and rear deck-mounted alternating ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed cab-mounted number boards with separately controlled LED-illumination* Directional LED-illuminated headlights LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall snowplow with MU hose openings and two (2) grab irons Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Inside loop uncoupling levers with down brackets 4-step rear stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door without window; security padlock with hasp Two-piece nose top grab irons Battery cabinet access door with latch GE safety cab with four (4) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: bolted panel forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Tall mirror mounted fore and aft of sliding cab side windows on left side, Tall mirror mounted fore of sliding cab side windows on right side; additional small mirror on right side JEM Communications PTC antenna farm with Sinclair antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Dual lifting lugs mounted to sides of clean air cab joint Early curved engine cab profile High mounted lift rings on engine cab power assembly doors Four door latches per side on exhaust cab doors Lost-wax brass cast Nathan AirChime P5 (P5R24 configuration) horn mounted on engine cab Early flanged exhaust stack housing “Bathtub” exhaust silencer 22 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Right side radiator wing access door with looped center latch and no bolt detail on Panel surrounding the door Electronic Handbrake with panel to the rear of the brake wheel Convex stamped brakewheel Left rear hood door grille arrangement: tall, short, short grilles High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Left side long rail all stanchions early type Right side long rail all stanchions early type Accurately profiled frame with separately-applied plumbing and traction motor cabling GE Hi-Ad trucks with reinforcement plate over center axle on right front and left rear side frames and separately applied brake cylinders, slngle bracket air plumbing, and rotating bearing caps Rust-color painted wheelsets No speed recorder Dual Graham-White (Salem) 824-100 centrifugal air filters Wabtec 994-500 series air dryer 5,000-gallon fuel tank with vertical wide spaced weld seams Fuel tank detail arrangement (front to back) right side – Fuel filler, EFCO, Digital Fuel Gauge Fuel tank mounted steel bell Separate air tanks with upper mounting brackets Curved handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Functions Two (2) cube-type speakers Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

• mit DCC Motordekoder
• mit Sound

All-new model Era: 2018 to present Series 4000 to 4005, rebuilt 8/15 Road number 4000; ex-NS 8799 C40-9 “Sonic Bonnet” blue mane with gray carbody paint scheme Rebuilt by American Motive Power at Roanoke, VA Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front and rear deck-mounted alternating ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed cab-mounted number boards with separately controlled LED-illumination* Directional LED-illuminated headlights LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall snowplow with MU hose openings and two (2) grab irons Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front Inside loop uncoupling levers with up down brackets and rear inside loop down brackets 4-step rear stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door without window; security padlock with hasp Two-piece nose top grab irons Battery cabinet access door with latch GE safety cab with four (4) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: bolted panel forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Dual wind deflector with small mirror at bottom mounted fore and aft of sliding cab windows on both sides JEM Communications PTC antenna farm with Sinclair antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Single lift ring, centered for clean air cab joint Early curved engine cab profile Low mounted lift rings on engine cab power assembly doors Three left side door latches and two right door latches on exhaust cab doors Lost-wax brass cast Nathan AirChime P5 (P5R24 configuration) horn mounted on engine cab Early flanged exhaust stack housing “Bathtub” exhaust silencer 22 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Right side radiator wing access door with two “T” handles and bolt detail around the door Electronic Handbrake with panel to the rear of the brake wheel Flat stamped Left rear hood door grille arrangement: tall, short, short grilles High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Left side long rail inverter cabinet late stanchions, all others early type Right side long rail 2nd and 3rd stanchions late type, all others early type Accurately profiled frame with separately-applied plumbing and traction motor cabling GE Hi-Ad trucks with reinforcement plate over center axle on right front and left rear side frames and separately applied brake cylinders, single bracket air plumbing, and rotating bearing caps Rust-color painted wheelsets No speed recorder Dual Graham-White (Salem) 824-100 centrifugal air filters Wabtec 994-500 series air dryer 5,000-gallon fuel tank with vertical close spaced weld seams Fuel tank detail arrangement (front to back) right side - Fuel Filer, Digital Fuel Gauge, EFCO Fuel tank mounted steel bell Separate air tanks with upper mounting brackets Curved handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Functions Two (2) cube-type speakers Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Gray with bold “Y M LINE’ lettering Era: 1990s – Present Fully-assembled Multiple road numbers Based upon a CMIC design 40’ standard-height (8’, 6” tall) container with “angled” side corrugations 8 “Squared” vertical nose corrugations 44 “Angled” side wall corrugation Doors with three center corrugations 55 embossed roof ribs Two vents per side Weld bead and stacking point details Cored-through IBC corner castings Four (4) separately applied door locking rods Intricately decorated with rooftop reporting marks, warning labels and capacity data Stackable with most other brands 40’ containers and chassis Compatible with PS-Trinity Backpacker Double-Stack 5-Unit Set

New road numbers Gray with Crocodile logos in logo panels Era: 1980s to 2000s Fully assembled 40’ standard-height (8’, 6” tall) container Eight (8) “squared” vertical nose corrugations 2-44-2 “squared” side wall corrugation Two (2) side logo panels 51 embossed roof ribs Two (2) vents per side Weld bead and stacking point details Cored-through Inter-Box Connector (IBC) corner castings Smooth doors Four (4) separately applied door locking rods Intricately decorated with rooftop reporting marks, warning labels and capacity data Stackable with most other brands of 40’ containers and chassis Compatible with PS-Trinity Backpacker Double-Stack 5-Unit Set

New road name Blue with large “Cho Yang” lettering Era: 1980s to 2000s Multiple road numbers Fully assembled 40’ standard-height (8’, 6” tall) container Eight (8) “squared” vertical nose corrugations 2-44-2 “squared” side wall corrugation Two (2) side logo panels 51 embossed roof ribs Two (2) vents per side Weld bead and stacking point details Cored-through Inter-Box Connector (IBC) corner castings Smooth doors Four (4) separately applied door locking rods Intricately decorated with rooftop reporting marks, warning labels and capacity data Stackable with most other brands of 40’ containers and chassis Compatible with PS-Trinity Backpacker Double-Stack 5-Unit Set

New roadname Green with Linea Mexicana white lettering and logos Era: 1980s to 2000s Multiple road numbers Fully assembled 40’ standard-height (8’, 6” tall) container Eight (8) “squared” vertical nose corrugations 2-44-2 “squared” side wall corrugation Two (2) side logo panels 51 embossed roof ribs Two (2) vents per side Weld bead and stacking point details Cored-through Inter-Box Connector (IBC) corner castings Smooth doors Four (4) separately applied door locking rods Intricately decorated with rooftop reporting marks, warning labels and capacity data Stackable with most other brands of 40’ containers and chassis Compatible with PS-Trinity Backpacker Double-Stack 5-Unit Set

New roadname Green with Linea Mexicana white lettering and logos Era: 1980s to 2000s Multiple road numbers Fully assembled 40’ standard-height (8’, 6” tall) container Eight (8) “squared” vertical nose corrugations 2-44-2 “squared” side wall corrugation Two (2) side logo panels 51 embossed roof ribs Two (2) vents per side Weld bead and stacking point details Cored-through Inter-Box Connector (IBC) corner castings Smooth doors Four (4) separately applied door locking rods Intricately decorated with rooftop reporting marks, warning labels and capacity data Stackable with most other brands of 40’ containers and chassis Compatible with PS-Trinity Backpacker Double-Stack 5-Unit Set

• DCC vorbereitet (Schnittstelle vorhanden)

New roadname Era: Late 1990s to Mid/Late 2010s Series 6703 to 6737, Ex CNW 8801 to 8835; built 11-12/1994 Road number 6736 Era: Late 90s to Late 2016 UP Repaint, We Will Deliver, Operation Lifesaver Logo Fully-assembled Multiple road numbers LED-illuminated front pilot face mounted ditch lights LED-illuminated low-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door with window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door with latch GE safety cab with three (3) side windows Right side cab under floor access doors: four screened louver sections per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communication antenna; small Sinclair “ice skate” End of Train (EOT) telemetry antenna; and small “cone” antenna Early: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels Alternating reinforcement ribs under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Forward right-side air intake grille Left side auxiliary cab: three (3) medium doors with latches on the #2 door Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Early curved engine cab profile Lost-wax brass cast Nathan AirChime K5HAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sandfiller Early “box” lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Salem) 824-100 centrifugal air filters No air dryer 5,000 gallon fuel tank Dual fuel fills per side Round and vertical analog fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket CNW-style spare coupler knuckle holders on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DC/DCC ready locomotives also feature: Operates on DC layouts DCC ready with Nano connector

• mit DCC Motordekoder
• mit Sound

New roadname Era: Late 1990s to Mid/Late 2010s Series 6703 to 6737, Ex CNW 8801 to 8835; built 11-12/1994 Road number 6736 Era: Late 90s to Late 2016 UP Repaint, We Will Deliver, Operation Lifesaver Logo Fully-assembled Multiple road numbers LED-illuminated front pilot face mounted ditch lights LED-illuminated low-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door with window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door with latch GE safety cab with three (3) side windows Right side cab under floor access doors: four screened louver sections per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communication antenna; small Sinclair “ice skate” End of Train (EOT) telemetry antenna; and small “cone” antenna Early: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels Alternating reinforcement ribs under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Forward right-side air intake grille Left side auxiliary cab: three (3) medium doors with latches on the #2 door Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Early curved engine cab profile Lost-wax brass cast Nathan AirChime K5HAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sandfiller Early “box” lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Salem) 824-100 centrifugal air filters No air dryer 5,000 gallon fuel tank Dual fuel fills per side Round and vertical analog fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket CNW-style spare coupler knuckle holders on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 Nano DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

• mit DCC Motordekoder
• mit Sound

New roadname Era: Late 1990s to Mid/Late 2010s Series 6703 to 6737, Ex CNW 8801 to 8835; built 11-12/1994 Road number 6724 UP Repaint, We Will Deliver Fully-assembled Multiple road numbers LED-illuminated front pilot face mounted ditch lights LED-illuminated low-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door with window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door with latch GE safety cab with three (3) side windows Right side cab under floor access doors: four screened louver sections per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communication antenna; small Sinclair “ice skate” End of Train (EOT) telemetry antenna; and small “cone” antenna Early: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels Alternating reinforcement ribs under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Forward right-side air intake grille Left side auxiliary cab: three (3) medium doors with latches on the #2 door Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Early curved engine cab profile Lost-wax brass cast Nathan AirChime K5HAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sandfiller Early “box” lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Salem) 824-100 centrifugal air filters No air dryer 5,000 gallon fuel tank Dual fuel fills per side Round and vertical analog fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket CNW-style spare coupler knuckle holders on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 Nano DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

• DCC vorbereitet (Schnittstelle vorhanden)

New roadname Era: Late 1990s to Mid/Late 2010s Series 6703 to 6737, Ex CNW 8801 to 8835; built 11-12/1994 Road number 6724 UP Repaint, We Will Deliver Fully-assembled Multiple road numbers LED-illuminated front pilot face mounted ditch lights LED-illuminated low-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door with window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door with latch GE safety cab with three (3) side windows Right side cab under floor access doors: four screened louver sections per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communication antenna; small Sinclair “ice skate” End of Train (EOT) telemetry antenna; and small “cone” antenna Early: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels Alternating reinforcement ribs under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Forward right-side air intake grille Left side auxiliary cab: three (3) medium doors with latches on the #2 door Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Early curved engine cab profile Lost-wax brass cast Nathan AirChime K5HAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sandfiller Early “box” lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Salem) 824-100 centrifugal air filters No air dryer 5,000 gallon fuel tank Dual fuel fills per side Round and vertical analog fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket CNW-style spare coupler knuckle holders on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DC/DCC ready locomotives also feature: Operates on DC layouts DCC ready with Nano connector

• DCC vorbereitet (Schnittstelle vorhanden)

New roadname Era: Late 1990s to Mid/Late 2010s Road number 6707 Era: Late 90s to mid-2013 CNW paint, UP Patch, UP Shield over CNW Logo on the nose Fully-assembled Multiple road numbers LED-illuminated front pilot face mounted ditch lights LED-illuminated low-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door with window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door with latch GE safety cab with three (3) side windows Right side cab under floor access doors: four screened louver sections per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communication antenna; small Sinclair “ice skate” End of Train (EOT) telemetry antenna; and small “cone” antenna Early: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels Alternating reinforcement ribs under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Forward right-side air intake grille Left side auxiliary cab: three (3) medium doors with latches on the #2 door Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Early curved engine cab profile Lost-wax brass cast Nathan AirChime K5HAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sandfiller Early “box” lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Salem) 824-100 centrifugal air filters No air dryer 5,000 gallon fuel tank Dual fuel fills per side Round and vertical analog fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket CNW-style spare coupler knuckle holders on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DC/DCC ready locomotives also feature: Operates on DC layouts DCC ready with Nano connector

• mit DCC Motordekoder
• mit Sound

New roadname Era: Late 1990s to Mid/Late 2010s Road number 6707 Era: Late 90s to mid-2013 CNW paint, UP Patch, UP Shield over CNW Logo on the nose Fully-assembled Multiple road numbers LED-illuminated front pilot face mounted ditch lights LED-illuminated low-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door with window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door with latch GE safety cab with three (3) side windows Right side cab under floor access doors: four screened louver sections per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communication antenna; small Sinclair “ice skate” End of Train (EOT) telemetry antenna; and small “cone” antenna Early: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels Alternating reinforcement ribs under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Forward right-side air intake grille Left side auxiliary cab: three (3) medium doors with latches on the #2 door Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Early curved engine cab profile Lost-wax brass cast Nathan AirChime K5HAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sandfiller Early “box” lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Salem) 824-100 centrifugal air filters No air dryer 5,000 gallon fuel tank Dual fuel fills per side Round and vertical analog fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket CNW-style spare coupler knuckle holders on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 Nano DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

• mit DCC Motordekoder
• mit Sound

Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights LED-illuminated low-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Wide profile end handrails Nose door with window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door without latch GE safety cab with three (3) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Medium rectangular antenna dome; small “cone” antenna, small “button” antenna Intermediate: four (4) square bolted panels and three (3) tall horizontal X-panels Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: three (3) short doors with latches on the #2 door; auxiliary cab filter box door Capacitor box on left side walkway Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Late angled engine cab profile with tri-fold power assembly access doors and raised “dot” treadplate on centerline Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles Tall, latched access door on long hood end Low-mounted rear sandfiller Late angled lifting “tabs” on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling Early GE Steerable Trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Prime) 975-075 air filters Graham-White 975-100 “twin tower” air filter dryer 5,000 gallon fuel tank Single fuel fills per side Round and vertical analog fuel gauges; digital fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 Nano DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts