Neuerscheinung! Auslieferung Dezember 2026

• mit DCC Motordekoder
• mit Sound

New paint scheme New road numbers Era: Mid-Late 1970s Series CR 6900-6924; ex-PC, same numbers; ex-PRR 7600-7624, built 11/57-1/58 CR 6912 No “CR” patches Front and rear multiple unit (MU) hose catch boxes Front and rear straight uncoupling levers with retrofitted straight grab handles Modified pilot faces with tall uncoupling lever loop cutouts Motorola ASP-16 “Firecracker” antenna mounted on top of the high short hood Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated early EMD headlight housing with lenses on high short hood Cab with standard armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Leslie S-3-L horn on long hood roof behind cab Standard bolted electrical cabinet roof hatch Separately-applied, tapered standard exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated early EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers GE type speed recorder mounted to second axle on left front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass and round inset dial gauge per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• DCC vorbereitet (Schnittstelle vorhanden)

New paint scheme New road numbers Era: Mid-Late 1970s Series CR 6900-6924; ex-PC, same numbers; ex-PRR 7600-7624, built 11/57-1/58 CR 6912 No “CR” patches Front and rear multiple unit (MU) hose catch boxes Front and rear straight uncoupling levers with retrofitted straight grab handles Modified pilot faces with tall uncoupling lever loop cutouts Motorola ASP-16 “Firecracker” antenna mounted on top of the high short hood Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated early EMD headlight housing with lenses on high short hood Cab with standard armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Leslie S-3-L horn on long hood roof behind cab Standard bolted electrical cabinet roof hatch Separately-applied, tapered standard exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated early EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers GE type speed recorder mounted to second axle on left front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass and round inset dial gauge per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• mit DCC Motordekoder
• mit Sound

New paint scheme New road numbers Era: Mid-Late 1970s Series CR 6900-6924; ex-PC, same numbers; ex-PRR 7600-7624, built 11/57-1/58 CR 6922 Patched with “CR” on each end and on long hood Front and rear multiple unit (MU) hose catch boxes with footboards Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Large Sinclair Excalibur “ice skate” antenna (communications) mounted on top of the high short hood Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated early EMD headlight housing with lenses on high short hood Cab with standard armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Leslie S-3-L horn on long hood roof behind cab Standard bolted electrical cabinet roof hatch Separately-applied, tapered standard exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated early EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers GE type speed recorder mounted to second axle on left front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass and round inset dial gauge per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• DCC vorbereitet (Schnittstelle vorhanden)

New paint scheme New road numbers Era: Mid-Late 1970s Series CR 6900-6924; ex-PC, same numbers; ex-PRR 7600-7624, built 11/57-1/58 CR 6922 Patched with “CR” on each end and on long hood Front and rear multiple unit (MU) hose catch boxes with footboards Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Large Sinclair Excalibur “ice skate” antenna (communications) mounted on top of the high short hood Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated early EMD headlight housing with lenses on high short hood Cab with standard armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Leslie S-3-L horn on long hood roof behind cab Standard bolted electrical cabinet roof hatch Separately-applied, tapered standard exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated early EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers GE type speed recorder mounted to second axle on left front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass and round inset dial gauge per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• mit DCC Motordekoder
• mit Sound

New roadname New paint scheme Era: 1957-Mid-60s Series D&RGW 5305-5314, built 7/57 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards “Straddle” (butterfly) type re-rail frogs Front and rear multiple unit (MU) hose catch boxes with pointed debris deflector 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated late EMD headlight housing with lenses on high short hood Cab with “retractable” type armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Round vent on cab roof Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan M-3 (M3R1) horn mounted to cab roof Motorola ASP-16 “Firecracker” antenna mounted on cab roof Standard bolted electrical cabinet roof hatch Separately-applied, tapered exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated late EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• DCC vorbereitet (Schnittstelle vorhanden)

New roadname New paint scheme Era: 1957-Mid-60s Series D&RGW 5305-5314, built 7/57 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards “Straddle” (butterfly) type re-rail frogs Front and rear multiple unit (MU) hose catch boxes with pointed debris deflector 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated late EMD headlight housing with lenses on high short hood Cab with “retractable” type armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Round vent on cab roof Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan M-3 (M3R1) horn mounted to cab roof Motorola ASP-16 “Firecracker” antenna mounted on cab roof Standard bolted electrical cabinet roof hatch Separately-applied, tapered exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated late EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• mit DCC Motordekoder
• mit Sound

New roadname New paint scheme Era: 1957-Mid-60s Series D&RGW 5305-5314, built 7/57 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards “Straddle” (butterfly) type re-rail frogs Front and rear multiple unit (MU) hose catch boxes with pointed debris deflector 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated late EMD headlight housing with lenses on high short hood Cab with “retractable” type armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Round vent on cab roof Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan M-3 (M3R1) horn mounted to cab roof Motorola ASP-16 “Firecracker” antenna mounted on cab roof Standard bolted electrical cabinet roof hatch Separately-applied, tapered exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated late EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• DCC vorbereitet (Schnittstelle vorhanden)

New roadname New paint scheme Era: 1957-Mid-60s Series D&RGW 5305-5314, built 7/57 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards “Straddle” (butterfly) type re-rail frogs Front and rear multiple unit (MU) hose catch boxes with pointed debris deflector 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated late EMD headlight housing with lenses on high short hood Cab with “retractable” type armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Round vent on cab roof Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan M-3 (M3R1) horn mounted to cab roof Motorola ASP-16 “Firecracker” antenna mounted on cab roof Standard bolted electrical cabinet roof hatch Separately-applied, tapered exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated late EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• mit DCC Motordekoder
• mit Sound

New roadname New paint scheme Era: 1957-Mid-60s Series D&RGW 5305-5314, built 7/57 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards “Straddle” (butterfly) type re-rail frogs Front and rear multiple unit (MU) hose catch boxes with pointed debris deflector 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated late EMD headlight housing with lenses on high short hood Cab with “retractable” type armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Round vent on cab roof Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan M-3 (M3R1) horn mounted to cab roof Motorola ASP-16 “Firecracker” antenna mounted on cab roof Standard bolted electrical cabinet roof hatch Separately-applied, tapered exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated late EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• DCC vorbereitet (Schnittstelle vorhanden)

New roadname New paint scheme Era: 1957-Mid-60s Series D&RGW 5305-5314, built 7/57 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards “Straddle” (butterfly) type re-rail frogs Front and rear multiple unit (MU) hose catch boxes with pointed debris deflector 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated late EMD headlight housing with lenses on high short hood Cab with “retractable” type armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Round vent on cab roof Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan M-3 (M3R1) horn mounted to cab roof Motorola ASP-16 “Firecracker” antenna mounted on cab roof Standard bolted electrical cabinet roof hatch Separately-applied, tapered exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated late EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• mit DCC Motordekoder
• mit Sound

New roadname New paint scheme Era: 1957-Mid-60s Series D&RGW 5305-5314, built 7/57 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards “Straddle” (butterfly) type re-rail frogs Front and rear multiple unit (MU) hose catch boxes with pointed debris deflector 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated late EMD headlight housing with lenses on high short hood Cab with “retractable” type armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Round vent on cab roof Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan M-3 (M3R1) horn mounted to cab roof Motorola ASP-16 “Firecracker” antenna mounted on cab roof Standard bolted electrical cabinet roof hatch Separately-applied, tapered exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated late EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• DCC vorbereitet (Schnittstelle vorhanden)

New roadname New paint scheme Era: 1957-Mid-60s Series D&RGW 5305-5314, built 7/57 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards “Straddle” (butterfly) type re-rail frogs Front and rear multiple unit (MU) hose catch boxes with pointed debris deflector 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated late EMD headlight housing with lenses on high short hood Cab with “retractable” type armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Round vent on cab roof Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan M-3 (M3R1) horn mounted to cab roof Motorola ASP-16 “Firecracker” antenna mounted on cab roof Standard bolted electrical cabinet roof hatch Separately-applied, tapered exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated late EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• mit DCC Motordekoder
• mit Sound

New roadname New paint scheme Era: 1957-Mid-60s Series D&RGW 5305-5314, built 7/57 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards “Straddle” (butterfly) type re-rail frogs Front and rear multiple unit (MU) hose catch boxes with pointed debris deflector 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated late EMD headlight housing with lenses on high short hood Cab with “retractable” type armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Round vent on cab roof Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan M-3 (M3R1) horn mounted to cab roof Motorola ASP-16 “Firecracker” antenna mounted on cab roof Standard bolted electrical cabinet roof hatch Separately-applied, tapered exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated late EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• DCC vorbereitet (Schnittstelle vorhanden)

New roadname New paint scheme Era: 1957-Mid-60s Series D&RGW 5305-5314, built 7/57 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards “Straddle” (butterfly) type re-rail frogs Front and rear multiple unit (MU) hose catch boxes with pointed debris deflector 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated late EMD headlight housing with lenses on high short hood Cab with “retractable” type armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Round vent on cab roof Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan M-3 (M3R1) horn mounted to cab roof Motorola ASP-16 “Firecracker” antenna mounted on cab roof Standard bolted electrical cabinet roof hatch Separately-applied, tapered exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated late EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• mit DCC Motordekoder
• mit Sound

New roadname New paint scheme Era: 1957-Mid-60s Series D&RGW 5305-5314, built 7/57 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards “Straddle” (butterfly) type re-rail frogs Front and rear multiple unit (MU) hose catch boxes with pointed debris deflector 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated late EMD headlight housing with lenses on high short hood Cab with “retractable” type armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Round vent on cab roof Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan M-3 (M3R1) horn mounted to cab roof Motorola ASP-16 “Firecracker” antenna mounted on cab roof Standard bolted electrical cabinet roof hatch Separately-applied, tapered exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated late EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• DCC vorbereitet (Schnittstelle vorhanden)

New roadname New paint scheme Era: 1957-Mid-60s Series D&RGW 5305-5314, built 7/57 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards “Straddle” (butterfly) type re-rail frogs Front and rear multiple unit (MU) hose catch boxes with pointed debris deflector 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated late EMD headlight housing with lenses on high short hood Cab with “retractable” type armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Round vent on cab roof Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan M-3 (M3R1) horn mounted to cab roof Motorola ASP-16 “Firecracker” antenna mounted on cab roof Standard bolted electrical cabinet roof hatch Separately-applied, tapered exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated late EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• mit DCC Motordekoder
• mit Sound

New roadname New paint scheme Era: 1957-Mid-60s Series D&RGW 5305-5314, built 7/57 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards “Straddle” (butterfly) type re-rail frogs Front and rear multiple unit (MU) hose catch boxes with pointed debris deflector 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated late EMD headlight housing with lenses on high short hood Cab with “retractable” type armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Round vent on cab roof Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan M-3 (M3R1) horn mounted to cab roof Motorola ASP-16 “Firecracker” antenna mounted on cab roof Standard bolted electrical cabinet roof hatch Separately-applied, tapered exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated late EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• DCC vorbereitet (Schnittstelle vorhanden)

New roadname New paint scheme Era: 1957-Mid-60s Series D&RGW 5305-5314, built 7/57 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards “Straddle” (butterfly) type re-rail frogs Front and rear multiple unit (MU) hose catch boxes with pointed debris deflector 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated late EMD headlight housing with lenses on high short hood Cab with “retractable” type armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Round vent on cab roof Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan M-3 (M3R1) horn mounted to cab roof Motorola ASP-16 “Firecracker” antenna mounted on cab roof Standard bolted electrical cabinet roof hatch Separately-applied, tapered exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated late EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• mit DCC Motordekoder
• mit Sound

New roadname New paint scheme Era: 1957-Mid-60s Series D&RGW 5305-5314, built 7/57 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards “Straddle” (butterfly) type re-rail frogs Front and rear multiple unit (MU) hose catch boxes with pointed debris deflector 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated late EMD headlight housing with lenses on high short hood Cab with “retractable” type armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Round vent on cab roof Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan M-3 (M3R1) horn mounted to cab roof Motorola ASP-16 “Firecracker” antenna mounted on cab roof Standard bolted electrical cabinet roof hatch Separately-applied, tapered exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated late EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector

Neuerscheinung! Auslieferung Dezember 2026

• DCC vorbereitet (Schnittstelle vorhanden)

New roadname New paint scheme Era: 1957-Mid-60s Series D&RGW 5305-5314, built 7/57 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated walkway lights on hood ends * LED-illuminated, tri-color front and rear class light housings on upper hood corners (SD9)** High short hood and long hood end number boards “Straddle” (butterfly) type re-rail frogs Front and rear multiple unit (MU) hose catch boxes with pointed debris deflector 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale “cast” style coupler buffer equipped with durable metal semi-scale Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Pilot-face mounted MU and field loop receptacles, both sides Standard SD9 stepwells “Channel” style handrail stanchions with end gangways with chain Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Standard high short hood Standard sub-base Standard sidesills with louvered access doors on right side LED-illuminated late EMD headlight housing with lenses on high short hood Cab with “retractable” type armrests Detailed cab interior with separate floor, rear wall, seats, and early control stand Round vent on cab roof Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan M-3 (M3R1) horn mounted to cab roof Motorola ASP-16 “Firecracker” antenna mounted on cab roof Standard bolted electrical cabinet roof hatch Separately-applied, tapered exhaust stacks Dynamic brake housing with dual 36” fans See-through dynamic brake intake grills with resistor grids behind intake vanes Separately-applied photoetched radiator intake screens with intake shutters underneath See-through 36” fan housings with separate fans Radiator core detail visible underneath radiator fans Separately-applied rooftop cooling piping Separately-applied sand fill hatches LED-illuminated late EMD headlight housing with lenses on long hood Detailed EMD Flex-i-Coil “C1” trucks with separately applied brake plumbing, brake cylinders, and flexible neoprene rubber sanding lines Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to third axle on right front truck sideframe Standard EMD bell mounted on end of rear fuel tank Underbody air filter details Single 1,200-gallon fuel tank mounted to the rear with single sight glass per side, and single 1,200-gallon fuel tank to the front Factory-applied wire grab irons, end ladders, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, signal hoses with silver gladhands, air tanks with plumbing, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Two (2) cube-type speakers 16-cylinder 567C prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector